Hi all,
I have a rtl8723ae wifi card on my laptop. When connecting to any wifi Access 
Point the wifi signal fluctuates from full strength to very low.  In order to 
connect and stay connected I must be no farther than two meters from my router 
otherwise I get disconnected.
I have tried the kernel driver on multiple distros as well as the vendor 
drivers for older kernel versions. All seem to have the same problem. The card 
works ok on Windows 7 with vendor drivers. I have also tried compiling 
backports-3.10-rc1-2 with no luck.
During a signal loss period I get no logs but if I take the laptop too far from 
the AP dmesg reports:

[  764.163774] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx
[  764.192783] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[  764.200572] wlp3s0: authenticated
[  764.203290] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3)
[  764.225178] wlp3s0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x411 
status=0 aid=2)
[  764.225452] wlp3s0: associated
[  764.225459] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[  772.036168] wlp3s0: deauthenticated from xx:xx:xx:xx:xx:xx (Reason: 15)
[  772.077800] cfg80211: Calling CRDA to update world regulatory domain
[  775.286474] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx
[  775.315559] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[  775.321158] wlp3s0: authenticated
[  775.322689] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3)
[  775.426155] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 2/3)
[  775.529550] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 3/3)
[  775.633015] wlp3s0: association with xx:xx:xx:xx:xx:xx timed out
[  786.622957] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx
[  786.651896] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[  786.662445] wlp3s0: authenticated
[  786.665720] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3)
[  786.673076] wlp3s0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x411 
status=0 aid=2)
[  786.673305] wlp3s0: associated
[  814.496149] wlp3s0: Connection to AP xx:xx:xx:xx:xx:xx lost
[  814.589627] cfg80211: Calling CRDA to update world regulatory domain
[  815.974548] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx
[  816.003540] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[  816.012928] wlp3s0: authenticated
[  816.014009] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3)
[  816.117439] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 2/3)
[  816.220847] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 3/3)
[  816.324220] wlp3s0: association with xx:xx:xx:xx:xx:xx timed out
[  817.806001] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx
[  817.835045] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[  817.935652] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 2/3)
[  818.039082] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 3/3)
[  818.142458] wlp3s0: authentication with xx:xx:xx:xx:xx:xx timed out
[  820.148096] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx
[  820.177057] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[  820.183705] wlp3s0: authenticated
[  820.184179] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3)
[  820.287650] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 2/3)
[  820.391074] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 3/3)
[  820.494461] wlp3s0: association with xx:xx:xx:xx:xx:xx timed out
[  826.476820] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx
[  826.505764] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[  826.606337] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 2/3)
[  826.709744] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 3/3)
[  826.813199] wlp3s0: authentication with xx:xx:xx:xx:xx:xx timed out
[  837.813007] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx
[  837.842080] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[  837.857000] wlp3s0: authenticated
[  837.859229] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3)
[  837.866815] wlp3s0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x411 
status=0 aid=2)
[  837.867038] wlp3s0: associated
[  845.599874] wlp3s0: deauthenticated from xx:xx:xx:xx:xx:xx (Reason: 15)
[  845.627330] cfg80211: Calling CRDA to update world regulatory domain
[  857.376412] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx
[  857.405387] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[  857.410017] wlp3s0: authenticated
[  857.412546] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3)
[  857.415665] wlp3s0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x411 
status=0 aid=2)
[  857.415902] wlp3s0: associated

The issue is exactly the same as discribed here:
http://askubuntu.com/questions/289414/rtl8723ae-driver-problem-ubuntu-13-04
Does anyone know what might be wrong?
Cheers for the help.
--
To unsubscribe from this list: send the line "unsubscribe backports" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to