This was only needed for some of the DRM drivers, remove it.
Signed-off-by: Hauke Mehrtens <[email protected]>
---
backport/backport-include/linux/i2c-algo-bit.h | 12 -
backport/compat/compat-3.4.c | 442 ------------------------
2 files changed, 454 deletions(-)
delete mode 100644 backport/backport-include/linux/i2c-algo-bit.h
diff --git a/backport/backport-include/linux/i2c-algo-bit.h
b/backport/backport-include/linux/i2c-algo-bit.h
deleted file mode 100644
index 643e0c7..0000000
--- a/backport/backport-include/linux/i2c-algo-bit.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __BACKPORT_LINUX_I2C_ALGO_BIT_H
-#define __BACKPORT_LINUX_I2C_ALGO_BIT_H
-#include_next <linux/i2c-algo-bit.h>
-#include <linux/version.h>
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0) && \
- LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34)
-#define i2c_bit_algo LINUX_BACKPORT(i2c_bit_algo)
-extern const struct i2c_algorithm i2c_bit_algo;
-#endif
-
-#endif /* __BACKPORT_LINUX_I2C_ALGO_BIT_H */
diff --git a/backport/compat/compat-3.4.c b/backport/compat/compat-3.4.c
index 43f0c51..f1d6178 100644
--- a/backport/compat/compat-3.4.c
+++ b/backport/compat/compat-3.4.c
@@ -263,448 +263,6 @@ EXPORT_SYMBOL_GPL(devm_regmap_init_i2c);
#endif /* defined(CONFIG_REGMAP) */
#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0)) */
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34))
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/delay.h>
-
-#define setsda(adap, val) adap->setsda(adap->data, val)
-#define setscl(adap, val) adap->setscl(adap->data, val)
-#define getsda(adap) adap->getsda(adap->data)
-#define getscl(adap) adap->getscl(adap->data)
-
-#define bit_dbg(level, dev, format, args...) \
- do {} while (0)
-
-static inline void sdalo(struct i2c_algo_bit_data *adap)
-{
- setsda(adap, 0);
- udelay((adap->udelay + 1) / 2);
-}
-
-static inline void sdahi(struct i2c_algo_bit_data *adap)
-{
- setsda(adap, 1);
- udelay((adap->udelay + 1) / 2);
-}
-
-static inline void scllo(struct i2c_algo_bit_data *adap)
-{
- setscl(adap, 0);
- udelay(adap->udelay / 2);
-}
-
-static int sclhi(struct i2c_algo_bit_data *adap)
-{
- unsigned long start;
-
- setscl(adap, 1);
-
- /* Not all adapters have scl sense line... */
- if (!adap->getscl)
- goto done;
-
- start = jiffies;
- while (!getscl(adap)) {
- /* This hw knows how to read the clock line, so we wait
- * until it actually gets high. This is safer as some
- * chips may hold it low ("clock stretching") while they
- * are processing data internally.
- */
- if (time_after(jiffies, start + adap->timeout)) {
- /* Test one last time, as we may have been preempted
- * between last check and timeout test.
- */
- if (getscl(adap))
- break;
- return -ETIMEDOUT;
- }
- cpu_relax();
- }
-#ifdef DEBUG
- if (jiffies != start && i2c_debug >= 3)
- pr_debug("i2c-algo-bit: needed %ld jiffies for SCL to go "
- "high\n", jiffies - start);
-#endif
-
-done:
- udelay(adap->udelay);
- return 0;
-}
-
-static void i2c_start(struct i2c_algo_bit_data *adap)
-{
- /* assert: scl, sda are high */
- setsda(adap, 0);
- udelay(adap->udelay);
- scllo(adap);
-}
-
-static void i2c_repstart(struct i2c_algo_bit_data *adap)
-{
- /* assert: scl is low */
- sdahi(adap);
- sclhi(adap);
- setsda(adap, 0);
- udelay(adap->udelay);
- scllo(adap);
-}
-
-
-static void i2c_stop(struct i2c_algo_bit_data *adap)
-{
- /* assert: scl is low */
- sdalo(adap);
- sclhi(adap);
- setsda(adap, 1);
- udelay(adap->udelay);
-}
-
-static int i2c_outb(struct i2c_adapter *i2c_adap, unsigned char c)
-{
- int i;
- int sb;
- int ack;
- struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
-
- /* assert: scl is low */
- for (i = 7; i >= 0; i--) {
- sb = (c >> i) & 1;
- setsda(adap, sb);
- udelay((adap->udelay + 1) / 2);
- if (sclhi(adap) < 0) { /* timed out */
- bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, "
- "timeout at bit #%d\n", (int)c, i);
- return -ETIMEDOUT;
- }
- /* FIXME do arbitration here:
- * if (sb && !getsda(adap)) -> ouch! Get out of here.
- *
- * Report a unique code, so higher level code can retry
- * the whole (combined) message and *NOT* issue STOP.
- */
- scllo(adap);
- }
- sdahi(adap);
- if (sclhi(adap) < 0) { /* timeout */
- bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, "
- "timeout at ack\n", (int)c);
- return -ETIMEDOUT;
- }
-
- /* read ack: SDA should be pulled down by slave, or it may
- * NAK (usually to report problems with the data we wrote).
- */
- ack = !getsda(adap); /* ack: sda is pulled low -> success */
- bit_dbg(2, &i2c_adap->dev, "i2c_outb: 0x%02x %s\n", (int)c,
- ack ? "A" : "NA");
-
- scllo(adap);
- return ack;
- /* assert: scl is low (sda undef) */
-}
-
-static int i2c_inb(struct i2c_adapter *i2c_adap)
-{
- /* read byte via i2c port, without start/stop sequence */
- /* acknowledge is sent in i2c_read. */
- int i;
- unsigned char indata = 0;
- struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
-
- /* assert: scl is low */
- sdahi(adap);
- for (i = 0; i < 8; i++) {
- if (sclhi(adap) < 0) { /* timeout */
- bit_dbg(1, &i2c_adap->dev, "i2c_inb: timeout at bit "
- "#%d\n", 7 - i);
- return -ETIMEDOUT;
- }
- indata *= 2;
- if (getsda(adap))
- indata |= 0x01;
- setscl(adap, 0);
- udelay(i == 7 ? adap->udelay / 2 : adap->udelay);
- }
- /* assert: scl is low */
- return indata;
-}
-
-static int try_address(struct i2c_adapter *i2c_adap,
- unsigned char addr, int retries)
-{
- struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
- int i, ret = 0;
-
- for (i = 0; i <= retries; i++) {
- ret = i2c_outb(i2c_adap, addr);
- if (ret == 1 || i == retries)
- break;
- bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
- i2c_stop(adap);
- udelay(adap->udelay);
- yield();
- bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
- i2c_start(adap);
- }
- if (i && ret)
- bit_dbg(1, &i2c_adap->dev, "Used %d tries to %s client at "
- "0x%02x: %s\n", i + 1,
- addr & 1 ? "read from" : "write to", addr >> 1,
- ret == 1 ? "success" : "failed, timeout?");
- return ret;
-}
-
-static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
-{
- unsigned short flags = msg->flags;
- unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK;
- struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
-
- unsigned char addr;
- int ret, retries;
-
- retries = nak_ok ? 0 : i2c_adap->retries;
-
- if (flags & I2C_M_TEN) {
- /* a ten bit address */
- addr = 0xf0 | ((msg->addr >> 7) & 0x06);
- bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr);
- /* try extended address code...*/
- ret = try_address(i2c_adap, addr, retries);
- if ((ret != 1) && !nak_ok) {
- dev_err(&i2c_adap->dev,
- "died at extended address code\n");
- return -ENXIO;
- }
- /* the remaining 8 bit address */
- ret = i2c_outb(i2c_adap, msg->addr & 0xff);
- if ((ret != 1) && !nak_ok) {
- /* the chip did not ack / xmission error occurred */
- dev_err(&i2c_adap->dev, "died at 2nd address code\n");
- return -ENXIO;
- }
- if (flags & I2C_M_RD) {
- bit_dbg(3, &i2c_adap->dev, "emitting repeated "
- "start condition\n");
- i2c_repstart(adap);
- /* okay, now switch into reading mode */
- addr |= 0x01;
- ret = try_address(i2c_adap, addr, retries);
- if ((ret != 1) && !nak_ok) {
- dev_err(&i2c_adap->dev,
- "died at repeated address code\n");
- return -EIO;
- }
- }
- } else { /* normal 7bit address */
- addr = msg->addr << 1;
- if (flags & I2C_M_RD)
- addr |= 1;
- if (flags & I2C_M_REV_DIR_ADDR)
- addr ^= 1;
- ret = try_address(i2c_adap, addr, retries);
- if ((ret != 1) && !nak_ok)
- return -ENXIO;
- }
-
- return 0;
-}
-
-static int sendbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
-{
- const unsigned char *temp = msg->buf;
- int count = msg->len;
- unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK;
- int retval;
- int wrcount = 0;
-
- while (count > 0) {
- retval = i2c_outb(i2c_adap, *temp);
-
- /* OK/ACK; or ignored NAK */
- if ((retval > 0) || (nak_ok && (retval == 0))) {
- count--;
- temp++;
- wrcount++;
-
- /* A slave NAKing the master means the slave didn't like
- * something about the data it saw. For example, maybe
- * the SMBus PEC was wrong.
- */
- } else if (retval == 0) {
- dev_err(&i2c_adap->dev, "sendbytes: NAK bailout.\n");
- return -EIO;
-
- /* Timeout; or (someday) lost arbitration
- *
- * FIXME Lost ARB implies retrying the transaction from
- * the first message, after the "winning" master issues
- * its STOP. As a rule, upper layer code has no reason
- * to know or care about this ... it is *NOT* an error.
- */
- } else {
- dev_err(&i2c_adap->dev, "sendbytes: error %d\n",
- retval);
- return retval;
- }
- }
- return wrcount;
-}
-
-static int acknak(struct i2c_adapter *i2c_adap, int is_ack)
-{
- struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
-
- /* assert: sda is high */
- if (is_ack) /* send ack */
- setsda(adap, 0);
- udelay((adap->udelay + 1) / 2);
- if (sclhi(adap) < 0) { /* timeout */
- dev_err(&i2c_adap->dev, "readbytes: ack/nak timeout\n");
- return -ETIMEDOUT;
- }
- scllo(adap);
- return 0;
-}
-
-static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
-{
- int inval;
- int rdcount = 0; /* counts bytes read */
- unsigned char *temp = msg->buf;
- int count = msg->len;
- const unsigned flags = msg->flags;
-
- while (count > 0) {
- inval = i2c_inb(i2c_adap);
- if (inval >= 0) {
- *temp = inval;
- rdcount++;
- } else { /* read timed out */
- break;
- }
-
- temp++;
- count--;
-
- /* Some SMBus transactions require that we receive the
- transaction length as the first read byte. */
- if (rdcount == 1 && (flags & I2C_M_RECV_LEN)) {
- if (inval <= 0 || inval > I2C_SMBUS_BLOCK_MAX) {
- if (!(flags & I2C_M_NO_RD_ACK))
- acknak(i2c_adap, 0);
- dev_err(&i2c_adap->dev, "readbytes: invalid "
- "block length (%d)\n", inval);
- return -EPROTO;
- }
- /* The original count value accounts for the extra
- bytes, that is, either 1 for a regular transaction,
- or 2 for a PEC transaction. */
- count += inval;
- msg->len += inval;
- }
-
- bit_dbg(2, &i2c_adap->dev, "readbytes: 0x%02x %s\n",
- inval,
- (flags & I2C_M_NO_RD_ACK)
- ? "(no ack/nak)"
- : (count ? "A" : "NA"));
-
- if (!(flags & I2C_M_NO_RD_ACK)) {
- inval = acknak(i2c_adap, count);
- if (inval < 0)
- return inval;
- }
- }
- return rdcount;
-}
-
-
-static u32 bit_func(struct i2c_adapter *adap)
-{
- return I2C_FUNC_I2C | I2C_FUNC_NOSTART | I2C_FUNC_SMBUS_EMUL |
- I2C_FUNC_SMBUS_READ_BLOCK_DATA |
- I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
- I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
-}
-
-static int bit_xfer(struct i2c_adapter *i2c_adap,
- struct i2c_msg msgs[], int num)
-{
- struct i2c_msg *pmsg;
- struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
- int i, ret;
- unsigned short nak_ok;
-
- if (adap->pre_xfer) {
- ret = adap->pre_xfer(i2c_adap);
- if (ret < 0)
- return ret;
- }
-
- bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
- i2c_start(adap);
- for (i = 0; i < num; i++) {
- pmsg = &msgs[i];
- nak_ok = pmsg->flags & I2C_M_IGNORE_NAK;
- if (!(pmsg->flags & I2C_M_NOSTART)) {
- if (i) {
- bit_dbg(3, &i2c_adap->dev, "emitting "
- "repeated start condition\n");
- i2c_repstart(adap);
- }
- ret = bit_doAddress(i2c_adap, pmsg);
- if ((ret != 0) && !nak_ok) {
- bit_dbg(1, &i2c_adap->dev, "NAK from "
- "device addr 0x%02x msg #%d\n",
- msgs[i].addr, i);
- goto bailout;
- }
- }
- if (pmsg->flags & I2C_M_RD) {
- /* read bytes into buffer*/
- ret = readbytes(i2c_adap, pmsg);
- if (ret >= 1)
- bit_dbg(2, &i2c_adap->dev, "read %d byte%s\n",
- ret, ret == 1 ? "" : "s");
- if (ret < pmsg->len) {
- if (ret >= 0)
- ret = -EIO;
- goto bailout;
- }
- } else {
- /* write bytes from buffer */
- ret = sendbytes(i2c_adap, pmsg);
- if (ret >= 1)
- bit_dbg(2, &i2c_adap->dev, "wrote %d byte%s\n",
- ret, ret == 1 ? "" : "s");
- if (ret < pmsg->len) {
- if (ret >= 0)
- ret = -EIO;
- goto bailout;
- }
- }
- }
- ret = i;
-
-bailout:
- bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
- i2c_stop(adap);
-
- if (adap->post_xfer)
- adap->post_xfer(i2c_adap);
- return ret;
-}
-
-
-const struct i2c_algorithm i2c_bit_algo = {
- .master_xfer = bit_xfer,
- .functionality = bit_func,
-};
-EXPORT_SYMBOL_GPL(i2c_bit_algo);
-#endif
-
int simple_open(struct inode *inode, struct file *file)
{
if (inode->i_private)
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe backports" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
