wait_on_bit_timeout() is only supported with kernel >= 3.17 in
backports. On older kernel versions we go back to the old
implementation. The new implementation was introduced in commits:
a087a98, fad7097 and 129a769.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
.../0053-remove_wait_on_bit_timeout/btusb.patch | 110 +++++++++++++++++++++
1 file changed, 110 insertions(+)
create mode 100644
patches/collateral-evolutions/network/0053-remove_wait_on_bit_timeout/btusb.patch
diff --git
a/patches/collateral-evolutions/network/0053-remove_wait_on_bit_timeout/btusb.patch
b/patches/collateral-evolutions/network/0053-remove_wait_on_bit_timeout/btusb.patch
new file mode 100644
index 0000000..e4b5b28
--- /dev/null
+++
b/patches/collateral-evolutions/network/0053-remove_wait_on_bit_timeout/btusb.patch
@@ -0,0 +1,110 @@
+--- a/drivers/bluetooth/btusb.c
++++ b/drivers/bluetooth/btusb.c
+@@ -1806,8 +1806,12 @@ static int btusb_recv_event_intel(struct
+ if (test_and_clear_bit(BTUSB_DOWNLOADING,
+ &data->flags) &&
+ test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,17,0)
+ smp_mb__after_atomic();
+ wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
++#else
++ wake_up_interruptible(&hdev->req_wait_q);
++#endif
+ }
+ }
+
+@@ -1818,8 +1822,12 @@ static int btusb_recv_event_intel(struct
+ if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 &&
+ skb->data[2] == 0x02) {
+ if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,17,0)
+ smp_mb__after_atomic();
+ wake_up_bit(&data->flags, BTUSB_BOOTING);
++#else
++ wake_up_interruptible(&hdev->req_wait_q);
++#endif
+ }
+ }
+ }
+@@ -2187,6 +2195,7 @@ static int btusb_setup_intel_new(struct
+ * and thus just timeout if that happens and fail the setup
+ * of this device.
+ */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,17,0)
+ err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
+ TASK_INTERRUPTIBLE,
+ msecs_to_jiffies(5000));
+@@ -2201,6 +2210,31 @@ static int btusb_setup_intel_new(struct
+ err = -ETIMEDOUT;
+ goto done;
+ }
++#else
++ if (test_bit(BTUSB_DOWNLOADING, &data->flags)) {
++ DECLARE_WAITQUEUE(wait, current);
++ signed long timeout;
++
++ add_wait_queue(&hdev->req_wait_q, &wait);
++ set_current_state(TASK_INTERRUPTIBLE);
++
++ timeout = schedule_timeout(msecs_to_jiffies(5000));
++
++ remove_wait_queue(&hdev->req_wait_q, &wait);
++
++ if (signal_pending(current)) {
++ BT_ERR("%s: Firmware loading interrupted", hdev->name);
++ err = -EINTR;
++ goto done;
++ }
++
++ if (!timeout) {
++ BT_ERR("%s: Firmware loading timeout", hdev->name);
++ err = -ETIMEDOUT;
++ goto done;
++ }
++ }
++#endif
+
+ if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
+ BT_ERR("%s: Firmware loading failed", hdev->name);
+@@ -2240,6 +2274,7 @@ done:
+ */
+ BT_INFO("%s: Waiting for device to boot", hdev->name);
+
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,17,0)
+ err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
+ TASK_INTERRUPTIBLE,
+ msecs_to_jiffies(1000));
+@@ -2253,6 +2288,33 @@ done:
+ BT_ERR("%s: Device boot timeout", hdev->name);
+ return -ETIMEDOUT;
+ }
++#else
++ if (test_bit(BTUSB_BOOTING, &data->flags)) {
++ DECLARE_WAITQUEUE(wait, current);
++ signed long timeout;
++
++ add_wait_queue(&hdev->req_wait_q, &wait);
++ set_current_state(TASK_INTERRUPTIBLE);
++
++ /* Booting into operational firmware should not take
++ * longer than 1 second. However if that happens, then
++ * just fail the setup since something went wrong.
++ */
++ timeout = schedule_timeout(msecs_to_jiffies(1000));
++
++ remove_wait_queue(&hdev->req_wait_q, &wait);
++
++ if (signal_pending(current)) {
++ BT_ERR("%s: Device boot interrupted", hdev->name);
++ return -EINTR;
++ }
++
++ if (!timeout) {
++ BT_ERR("%s: Device boot timeout", hdev->name);
++ return -ETIMEDOUT;
++ }
++ }
++#endif
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe backports" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
