I'm running Debian sarge with P4 2.8GHZ processor, 512MB RAM and 750GB of disk space in a home network environment that includes Windoze XP, MAC OS 10 and Linux. I'm using SAMBA as the transport mechanism for backuppc. However, everytime backuppc launches, the linux server itself backs up ok, but crashes and re-boots the linux box (where backuppc is hosted) while backing up the WinXp box.
I've run extensive hardware diags on the linux box and it's clean. It's a pretty brand new box. Not sure where to start looking for the problem, but I did try rsync, but grew frustrated in trying to get it to work. I'm sure I lack some key basic knowledge in this area. Here are a couple of logs that may be helpful?! If anyone has any insight or can direct me to a location where I can learn more on my own, that would be great. Note the problem in this instance happened Jan 20 @ 20:14 Here's the syslog*********************************************** Jan 20 15:46:25 localhost -- MARK -- Jan 20 16:06:25 localhost -- MARK -- Jan 20 16:26:25 localhost -- MARK -- Jan 20 16:46:26 localhost -- MARK -- Jan 20 17:06:26 localhost -- MARK -- Jan 20 17:26:26 localhost -- MARK -- Jan 20 17:46:26 localhost -- MARK -- Jan 20 18:06:27 localhost -- MARK -- Jan 20 18:26:27 localhost -- MARK -- Jan 20 18:46:27 localhost -- MARK -- Jan 20 19:06:27 localhost -- MARK -- Jan 20 19:26:27 localhost -- MARK -- Jan 20 19:46:27 localhost -- MARK -- Jan 20 20:06:27 localhost -- MARK -- Jan 20 20:14:36 localhost syslogd 1.4.1#17: restart. Jan 20 20:14:36 localhost kernel: klogd 1.4.1#17, log source = /proc/kmsg started. Jan 20 20:14:36 localhost kernel: Inspecting /boot/System.map-2.4.27-2-386 Jan 20 20:14:36 localhost kernel: Loaded 18328 symbols from /boot/System.map-2.4.27-2-386. Jan 20 20:14:36 localhost kernel: Symbols match kernel version 2.4.27. Jan 20 20:14:36 localhost kernel: Loaded 845 symbols from 34 modules. Jan 20 20:14:36 localhost kernel: Linux version 2.4.27-2-386 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Wed Aug 17 09:33:35 UTC 2005 Jan 20 20:14:36 localhost kernel: BIOS-provided physical RAM map: Jan 20 20:14:36 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) Jan 20 20:14:36 localhost kernel: BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) Jan 20 20:14:36 localhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Jan 20 20:14:36 localhost kernel: BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) Jan 20 20:14:36 localhost kernel: BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) Jan 20 20:14:36 localhost kernel: BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) Jan 20 20:14:36 localhost kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Jan 20 20:14:36 localhost kernel: 511MB LOWMEM available. Jan 20 20:14:36 localhost kernel: found SMP MP-table at 000f5a80 Jan 20 20:14:36 localhost kernel: hm, page 000f5000 reserved twice. Jan 20 20:14:36 localhost kernel: hm, page 000f6000 reserved twice. Jan 20 20:14:36 localhost kernel: hm, page 000f0000 reserved twice. Jan 20 20:14:36 localhost kernel: hm, page 000f1000 reserved twice. Jan 20 20:14:36 localhost kernel: On node 0 totalpages: 131056 Jan 20 20:14:36 localhost kernel: zone(0): 4096 pages. Jan 20 20:14:36 localhost kernel: zone(1): 126960 pages. Jan 20 20:14:36 localhost kernel: zone(2): 0 pages. Jan 20 20:14:36 localhost kernel: ACPI: RSDP (v000 PT880 ) @ 0x000f7440 Jan 20 20:14:36 localhost kernel: ACPI: RSDT (v001 PT880 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 Jan 20 20:14:36 localhost kernel: ACPI: FADT (v001 PT880 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 Jan 20 20:14:36 localhost kernel: ACPI: MADT (v001 PT880 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7bc0 Jan 20 20:14:36 localhost kernel: ACPI: DSDT (v001 PT880 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 Jan 20 20:14:36 localhost kernel: ACPI: Local APIC address 0xfee00000 Jan 20 20:14:36 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Jan 20 20:14:36 localhost kernel: Processor #0 Unknown CPU [15:3] APIC version 20 Jan 20 20:14:36 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Jan 20 20:14:36 localhost kernel: Processor #1 Unknown CPU [15:3] APIC version 20 Jan 20 20:14:36 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Jan 20 20:14:36 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Jan 20 20:14:36 localhost kernel: Using ACPI for processor (LAPIC) configuration information Jan 20 20:14:36 localhost kernel: Intel MultiProcessor Specification v1.4 Jan 20 20:14:36 localhost kernel: Virtual Wire compatibility mode. Jan 20 20:14:36 localhost kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Jan 20 20:14:36 localhost kernel: I/O APIC #2 Version 17 at 0xFEC00000. Jan 20 20:14:36 localhost kernel: Enabling APIC mode: Flat.^IUsing 1 I/O APICs Jan 20 20:14:36 localhost kernel: Processors: 2 Jan 20 20:14:36 localhost kernel: Kernel command line: root=/dev/hda1 ro Jan 20 20:14:36 localhost kernel: Initializing CPU#0 Jan 20 20:14:36 localhost kernel: Detected 2814.011 MHz processor. Jan 20 20:14:36 localhost kernel: Console: colour VGA+ 80x25 Jan 20 20:14:36 localhost kernel: Calibrating delay loop... 5609.88 BogoMIPS Jan 20 20:14:36 localhost kernel: Memory: 512540k/524224k available (1069k kernel code, 11292k reserved, 459k data, 96k init, 0k highmem) Jan 20 20:14:36 localhost kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Jan 20 20:14:36 localhost kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Jan 20 20:14:36 localhost kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes) Jan 20 20:14:36 localhost kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Jan 20 20:14:36 localhost kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Jan 20 20:14:36 localhost kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K Jan 20 20:14:36 localhost kernel: CPU: L2 cache: 1024K Jan 20 20:14:36 localhost kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03 Jan 20 20:14:36 localhost kernel: Enabling fast FPU save and restore... done. Jan 20 20:14:36 localhost kernel: Enabling unmasked SIMD FPU exception support... done. Jan 20 20:14:36 localhost kernel: Checking 'hlt' instruction... OK. Jan 20 20:14:36 localhost kernel: Checking for popad bug... OK. Jan 20 20:14:36 localhost kernel: POSIX conformance testing by UNIFIX Jan 20 20:14:36 localhost kernel: enabled ExtINT on CPU#0 Jan 20 20:14:36 localhost kernel: ESR value before enabling vector: 00000000 Jan 20 20:14:36 localhost kernel: ESR value after enabling vector: 00000000 Jan 20 20:14:36 localhost kernel: ENABLING IO-APIC IRQs Jan 20 20:14:36 localhost kernel: Setting 2 in the phys_id_present_map Jan 20 20:14:36 localhost kernel: ...changing IO-APIC physical APIC ID to 2 ... ok. Jan 20 20:14:36 localhost kernel: ..TIMER: vector=0x31 pin1=2 pin2=0 Jan 20 20:14:36 localhost kernel: testing the IO APIC....................... Jan 20 20:14:36 localhost kernel: Jan 20 20:14:36 localhost kernel: .................................... done. Jan 20 20:14:36 localhost kernel: Using local APIC timer interrupts. Jan 20 20:14:36 localhost kernel: calibrating APIC timer ... Jan 20 20:14:36 localhost kernel: ..... CPU clock speed is 2813.9196 MHz. Jan 20 20:14:36 localhost kernel: ..... host bus clock speed is 200.9940 MHz. Jan 20 20:14:36 localhost kernel: cpu: 0, clocks: 2009940, slice: 1004970 Jan 20 20:14:36 localhost kernel: CPU0<T0:2009936,T1:1004960,D:6,S:1004970,C:2009940> Jan 20 20:14:36 localhost kernel: ACPI: Subsystem revision 20040326 Jan 20 20:14:36 localhost kernel: ACPI: Interpreter disabled. Jan 20 20:14:36 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb330, last bus=1 Jan 20 20:14:36 localhost kernel: PCI: Using configuration type 1 Jan 20 20:14:36 localhost kernel: PCI: Probing PCI hardware Jan 20 20:14:36 localhost kernel: PCI: ACPI tables contain no PCI IRQ routing entries Jan 20 20:14:36 localhost kernel: PCI: Probing PCI hardware (bus 00) Jan 20 20:14:36 localhost kernel: PCI: Using IRQ router VIA [1106/3227] at 00:11.0 Jan 20 20:14:36 localhost kernel: PCI->APIC IRQ transform: (B0,I11,P0) -> 19 Jan 20 20:14:36 localhost kernel: PCI->APIC IRQ transform: (B0,I15,P1) -> 20 Jan 20 20:14:36 localhost kernel: PCI->APIC IRQ transform: (B0,I15,P0) -> 20 Jan 20 20:14:36 localhost kernel: PCI->APIC IRQ transform: (B0,I16,P0) -> 21 Jan 20 20:14:36 localhost kernel: PCI->APIC IRQ transform: (B0,I16,P0) -> 21 Jan 20 20:14:36 localhost kernel: PCI->APIC IRQ transform: (B0,I16,P1) -> 21 Jan 20 20:14:36 localhost kernel: PCI->APIC IRQ transform: (B0,I16,P1) -> 21 Jan 20 20:14:36 localhost kernel: PCI->APIC IRQ transform: (B0,I16,P2) -> 21 Jan 20 20:14:36 localhost kernel: PCI->APIC IRQ transform: (B0,I17,P2) -> 22 Jan 20 20:14:36 localhost kernel: PCI->APIC IRQ transform: (B0,I18,P0) -> 23 Jan 20 20:14:36 localhost kernel: PCI->APIC IRQ transform: (B1,I0,P0) -> 16 Jan 20 20:14:36 localhost kernel: PCI: Via IRQ fixup for 00:10.2, from 11 to 5 Jan 20 20:14:36 localhost kernel: PCI: Via IRQ fixup for 00:10.3, from 11 to 5 Jan 20 20:14:36 localhost kernel: Linux NET4.0 for Linux 2.4 Jan 20 20:14:36 localhost kernel: Based upon Swansea University Computer Society NET3.039 Jan 20 20:14:36 localhost kernel: Initializing RT netlink socket Jan 20 20:14:36 localhost kernel: Starting kswapd Jan 20 20:14:36 localhost kernel: VFS: Disk quotas vdquot_6.5.1 Jan 20 20:14:36 localhost kernel: devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) Jan 20 20:14:36 localhost kernel: devfs: boot_options: 0x0 Jan 20 20:14:36 localhost kernel: pty: 256 Unix98 ptys configured Jan 20 20:14:36 localhost kernel: Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled Jan 20 20:14:36 localhost kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Jan 20 20:14:36 localhost kernel: COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]> Jan 20 20:14:36 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Jan 20 20:14:36 localhost kernel: Initializing Cryptographic API Jan 20 20:14:36 localhost kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Jan 20 20:14:36 localhost kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes Jan 20 20:14:36 localhost kernel: TCP: Hash tables configured (established 32768 bind 65536) Jan 20 20:14:36 localhost kernel: Linux IP multicast router 0.06 plus PIM-SM Jan 20 20:14:36 localhost kernel: RAMDISK: cramfs filesystem found at block 0 Jan 20 20:14:36 localhost kernel: RAMDISK: Loading 3720 blocks [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H| ^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H| ^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H| ^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H| ^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H| ^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H| ^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H| ^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H| ^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H| ^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H| ^Hdone. Jan 20 20:14:36 localhost kernel: Freeing initrd memory: 3720k freed Jan 20 20:14:36 localhost kernel: VFS: Mounted root (cramfs filesystem). Jan 20 20:14:36 localhost kernel: Freeing unused kernel memory: 96k freed Jan 20 20:14:36 localhost kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Jan 20 20:14:36 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 Jan 20 20:14:36 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jan 20 20:14:36 localhost kernel: PDC20268: IDE controller at PCI slot 00:0b.0 Jan 20 20:14:36 localhost kernel: PDC20268: chipset revision 2 Jan 20 20:14:36 localhost kernel: PDC20268: not 100%% native mode: will probe irqs later Jan 20 20:14:36 localhost kernel: ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:pio, hdf:pio Jan 20 20:14:36 localhost kernel: ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:pio, hdh:pio Jan 20 20:14:36 localhost kernel: VP_IDE: IDE controller at PCI slot 00:0f.1 Jan 20 20:14:36 localhost kernel: VP_IDE: chipset revision 6 Jan 20 20:14:36 localhost kernel: VP_IDE: not 100%% native mode: will probe irqs later Jan 20 20:14:36 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jan 20 20:14:36 localhost kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci00:0f.1 Jan 20 20:14:36 localhost kernel: ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:DMA Jan 20 20:14:36 localhost kernel: ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:DMA Jan 20 20:14:36 localhost kernel: hda: ST340014A, ATA DISK drive Jan 20 20:14:36 localhost kernel: hdb: OEM CD-ROM F563E, ATAPI CD/DVD-ROM drive Jan 20 20:14:36 localhost kernel: blk: queue e0825b60, I/O limit 4095Mb (mask 0xffffffff) Jan 20 20:14:36 localhost kernel: hdc: HDS722525VLAT80, ATA DISK drive Jan 20 20:14:36 localhost kernel: hdd: WDC WD2000JB-32EVA0, ATA DISK drive Jan 20 20:14:36 localhost kernel: blk: queue e0825fb4, I/O limit 4095Mb (mask 0xffffffff) Jan 20 20:14:36 localhost kernel: blk: queue e08260f0, I/O limit 4095Mb (mask 0xffffffff) Jan 20 20:14:36 localhost kernel: hde: ST3300831A, ATA DISK drive Jan 20 20:14:36 localhost kernel: blk: queue e0826408, I/O limit 4095Mb (mask 0xffffffff) Jan 20 20:14:36 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jan 20 20:14:36 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15 Jan 20 20:14:36 localhost kernel: ide2 at 0xa000-0xa007,0xa402 on irq 19 Jan 20 20:14:36 localhost kernel: hda: attached ide-disk driver. Jan 20 20:14:36 localhost kernel: hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) Jan 20 20:14:36 localhost kernel: hdc: attached ide-disk driver. Jan 20 20:14:36 localhost kernel: hdc: 488397168 sectors (250059 MB) w/7938KiB Cache, CHS=30401/255/63, UDMA(100) Jan 20 20:14:36 localhost kernel: hdd: attached ide-disk driver. Jan 20 20:14:36 localhost kernel: hdd: 390721968 sectors (200050 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) Jan 20 20:14:36 localhost kernel: hde: attached ide-disk driver. Jan 20 20:14:36 localhost kernel: hde: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(100) Jan 20 20:14:36 localhost kernel: Partition check: Jan 20 20:14:36 localhost kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 > Jan 20 20:14:36 localhost kernel: /dev/ide/host0/bus1/target0/lun0: p1 Jan 20 20:14:36 localhost kernel: /dev/ide/host0/bus1/target1/lun0: p1 p2 p3 p4 Jan 20 20:14:36 localhost kernel: /dev/ide/host2/bus0/target0/lun0: p1 Jan 20 20:14:36 localhost kernel: Journalled Block Device driver loaded Jan 20 20:14:36 localhost kernel: EXT3-fs: INFO: recovery required on readonly filesystem. Jan 20 20:14:36 localhost kernel: EXT3-fs: write access will be enabled during recovery. Jan 20 20:14:36 localhost kernel: kjournald starting. Commit interval 5 seconds Jan 20 20:14:36 localhost kernel: EXT3-fs: ide0(3,1): orphan cleanup on readonly fs Jan 20 20:14:36 localhost kernel: EXT3-fs: ide0(3,1): 5 orphan inodes deleted Jan 20 20:14:36 localhost kernel: EXT3-fs: recovery complete. Jan 20 20:14:36 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Jan 20 20:14:36 localhost kernel: Adding Swap: 1381548k swap-space (priority -1) Jan 20 20:14:36 localhost kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal Jan 20 20:14:36 localhost kernel: Real Time Clock Driver v1.10f Jan 20 20:14:36 localhost kernel: hdb: attached ide-cdrom driver. Jan 20 20:14:36 localhost kernel: hdb: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33) Jan 20 20:14:36 localhost kernel: Uniform CD-ROM driver Revision: 3.12 Jan 20 20:14:36 localhost kernel: kjournald starting. Commit interval 5 seconds Jan 20 20:14:36 localhost kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal Jan 20 20:14:36 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Jan 20 20:14:36 localhost kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended Jan 20 20:14:36 localhost last message repeated 5 times Jan 20 20:14:36 localhost kernel: via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker Jan 20 20:14:36 localhost kernel: http://www.scyld.com/network/via-rhine.html Jan 20 20:14:36 localhost kernel: eth0: VIA VT6102 Rhine-II at 0xe400, 00:50:8d:d5:9e:92, IRQ 23. Jan 20 20:14:36 localhost kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. Jan 20 20:14:36 localhost kernel: SCSI subsystem driver Revision: 1.00 Jan 20 20:14:36 localhost kernel: sata_via(00:0f.0): routed to hard irq line 4 Jan 20 20:14:36 localhost kernel: ata1: SATA max UDMA/133 cmd 0xB400 ctl 0xB802 bmdma 0xC400 irq 20 Jan 20 20:14:36 localhost kernel: ata2: SATA max UDMA/133 cmd 0xBC00 ctl 0xC002 bmdma 0xC408 irq 20 Jan 20 20:14:36 localhost kernel: ata1: no device found (phy stat 00000000) Jan 20 20:14:36 localhost kernel: ata2: no device found (phy stat 00000000) Jan 20 20:14:36 localhost kernel: scsi0 : sata_via Jan 20 20:14:36 localhost kernel: scsi1 : sata_via Jan 20 20:14:36 localhost kernel: scsi2 : SCSI host adapter emulation for IDE ATAPI devices Jan 20 20:14:36 localhost kernel: usb.c: registered new driver usbdevfs Jan 20 20:14:36 localhost kernel: usb.c: registered new driver hub Jan 20 20:14:36 localhost kernel: usb-uhci.c: $Revision: 1.275 $ time 09:50:48 Aug 17 2005 Jan 20 20:14:36 localhost kernel: usb-uhci.c: High bandwidth mode enabled Jan 20 20:14:36 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 21 Jan 20 20:14:36 localhost kernel: usb-uhci.c: Detected 2 ports Jan 20 20:14:36 localhost kernel: usb.c: new USB bus registered, assigned bus number 1 Jan 20 20:14:36 localhost kernel: hub.c: USB hub found Jan 20 20:14:36 localhost kernel: hub.c: 2 ports detected Jan 20 20:14:36 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 21 Jan 20 20:14:36 localhost kernel: usb-uhci.c: Detected 2 ports Jan 20 20:14:36 localhost kernel: usb.c: new USB bus registered, assigned bus number 2 Jan 20 20:14:36 localhost kernel: hub.c: USB hub found Jan 20 20:14:36 localhost kernel: hub.c: 2 ports detected Jan 20 20:14:36 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 21 Jan 20 20:14:36 localhost kernel: usb-uhci.c: Detected 2 ports Jan 20 20:14:36 localhost kernel: usb.c: new USB bus registered, assigned bus number 3 Jan 20 20:14:36 localhost kernel: hub.c: USB hub found Jan 20 20:14:36 localhost kernel: hub.c: 2 ports detected Jan 20 20:14:36 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 21 Jan 20 20:14:36 localhost kernel: usb-uhci.c: Detected 2 ports Jan 20 20:14:36 localhost kernel: usb.c: new USB bus registered, assigned bus number 4 Jan 20 20:14:36 localhost kernel: hub.c: USB hub found Jan 20 20:14:36 localhost kernel: hub.c: 2 ports detected Jan 20 20:14:36 localhost kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Jan 20 20:14:36 localhost kernel: ehci_hcd 00:10.4: VIA Technologies, Inc. USB 2.0 Jan 20 20:14:36 localhost kernel: ehci_hcd 00:10.4: irq 21, pci mem e095b000 Jan 20 20:14:36 localhost kernel: usb.c: new USB bus registered, assigned bus number 5 Jan 20 20:14:36 localhost kernel: ehci_hcd 00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 Jan 20 20:14:36 localhost kernel: hub.c: USB hub found Jan 20 20:14:36 localhost kernel: hub.c: 8 ports detected Jan 20 20:14:36 localhost kernel: via82xx: Assuming DXS channels with 48k fixed sample rate. Jan 20 20:14:36 localhost kernel: Please try dxs_support=1 or dxs_support=4 option Jan 20 20:14:36 localhost kernel: and report if it works on your machine. Jan 20 20:14:36 localhost kernel: uhci.c: USB Universal Host Controller Interface driver v1.1 Jan 20 20:14:36 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jan 20 20:14:36 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jan 20 20:14:36 localhost kernel: eth0: Setting full-duplex based on MII #1 link partner capability of 45e1. Jan 20 20:14:40 localhost kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE] Jan 20 20:14:40 localhost kernel: lp0: using parport0 (polling). Jan 20 20:14:46 localhost kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Jan 20 20:34:36 localhost -- MARK -- Jan 20 20:54:36 localhost -- MARK -- Jan 20 21:14:36 localhost -- MARK -- Jan 20 21:34:36 localhost -- MARK -- Jan 20 21:44:20 localhost gconfd (rgmcleod-1696): starting (version 2.8.1), pid 1696 user 'rgmcleod' Jan 20 21:44:20 localhost gconfd (rgmcleod-1696): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 20 21:44:20 localhost gconfd (rgmcleod-1696): Resolved address "xml:readwrite:/home/rgmcleod/.gconf" to a writable configuration source at position 1 Jan 20 21:44:20 localhost gconfd (rgmcleod-1696): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 20 21:44:37 localhost gconfd (rgmcleod-1696): Resolved address "xml:readwrite:/home/rgmcleod/.gconf" to a writable configuration source at position 0 Jan 20 21:45:10 localhost gconfd (rgmcleod-1696): Exiting Jan 20 21:45:19 localhost gconfd (root-1878): starting (version 2.8.1), pid 1878 user 'root' Jan 20 21:45:19 localhost gconfd (root-1878): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 20 21:45:19 localhost gconfd (root-1878): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Jan 20 21:45:19 localhost gconfd (root-1878): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 20 21:45:22 localhost gconfd (root-1878): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0 Here's a snap of the kernlog******************************************** Jan 19 16:46:17 localhost kernel: PCI: Setting latency timer of device 00:11.5 to 64 Jan 19 16:46:17 localhost kernel: uhci.c: USB Universal Host Controller Interface driver v1.1 Jan 19 16:46:17 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jan 19 16:46:17 localhost kernel: shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 Jan 19 16:46:17 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jan 19 16:46:17 localhost kernel: pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001 Jan 19 16:46:17 localhost kernel: eth0: Setting full-duplex based on MII #1 link partner capability of 45e1. Jan 19 16:46:22 localhost kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE] Jan 19 16:46:22 localhost kernel: lp0: using parport0 (polling). Jan 19 16:46:29 localhost kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Jan 20 20:14:36 localhost kernel: klogd 1.4.1#17, log source = /proc/kmsg started. Jan 20 20:14:36 localhost kernel: Inspecting /boot/System.map-2.4.27-2-386 Jan 20 20:14:36 localhost kernel: Loaded 18328 symbols from /boot/System.map-2.4.27-2-386. Jan 20 20:14:36 localhost kernel: Symbols match kernel version 2.4.27. Jan 20 20:14:36 localhost kernel: Loaded 845 symbols from 34 modules. Jan 20 20:14:36 localhost kernel: Linux version 2.4.27-2-386 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Wed Aug 17 09:33:35 UTC 2005 Jan 20 20:14:36 localhost kernel: BIOS-provided physical RAM map: Here's the Contents of file /var/lib/backuppc/log/LOG, modified 2006-01-21 10:56:45 2006-01-20 08:00:01 Running 2 BackupPC_nightly jobs from 0..15 (out of 0..15) 2006-01-20 08:00:01 Running BackupPC_nightly -m 0 127 (pid=16270) 2006-01-20 08:00:01 Running BackupPC_nightly 128 255 (pid=16271) 2006-01-20 08:00:01 Next wakeup is 2006-01-20 15:00:00 2006-01-20 08:01:28 Finished admin1 (BackupPC_nightly 128 255) 2006-01-20 08:01:28 BackupPC_nightly now running BackupPC_sendEmail 2006-01-20 08:01:32 Finished admin (BackupPC_nightly -m 0 127) 2006-01-20 08:01:32 Pool nightly clean removed 0 files of size 0.00GB 2006-01-20 08:01:32 Pool is 0.00GB, 0 files (0 repeated, 0 max chain, 0 max links), 1 directories 2006-01-20 08:01:32 Cpool nightly clean removed 5 files of size 0.00GB 2006-01-20 08:01:32 Cpool is 34.29GB, 43346 files (5 repeated, 1 max chain, 145 max links), 4369 directories 2006-01-20 15:00:00 Next wakeup is 2006-01-20 20:00:00 2006-01-20 20:00:00 Next wakeup is 2006-01-21 08:00:00 2006-01-20 20:00:01 Started full backup on tractorii (pid=27318, share=d) 2006-01-20 20:00:01 Started incr backup on localhost (pid=27320, share=/etc) 2006-01-20 20:00:38 Finished incr backup on localhost 2006-01-20 20:00:38 Running BackupPC_link localhost (pid=27338) 2006-01-20 20:00:38 Finished localhost (BackupPC_link localhost) 2006-01-20 20:14:38 Reading hosts file 2006-01-20 20:14:38 BackupPC started, pid 1480 2006-01-20 20:14:38 Running BackupPC_trashClean (pid=1481) 2006-01-20 20:14:38 Next wakeup is 2006-01-21 08:00:00 2006-01-20 21:56:24 Got signal TERM... cleaning up 2006-01-21 10:56:45 Reading hosts file 2006-01-21 10:56:45 BackupPC started, pid 1483 2006-01-21 10:56:45 Running BackupPC_trashClean (pid=1486) 2006-01-21 10:56:45 Next wakeup is 2006-01-21 15:00:00 Any help you can provide is appreciated Ron McLeod Cedar Park TX ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
