On Fri, 2006-08-11 at 20:53 -0700, Craig Barratt wrote:
> Chris Stone writes:
>
> > Had a bit of time to spend on this and I did get the upgrade installed
> > without having to hack the scripts at all. I DID have to upgrade the
> > Encode package to 2.18 and that took care of it all and the install
> > completed and backuppc started successfully.
>
> Good detective work!
Thanks! ;-D
> Yes, for some reason your older version of Encode made the
> check for BackupPC::FileZIO fail. What is your version of
> perl?
>
[EMAIL PROTECTED] conf]# perl -V
Summary of my perl5 (revision 5.0 version 8 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.8-1.521smp,
archname=i386-linux-thread-multi
uname='linux jane.spidermaker.fedoralegacy.org 2.6.8-1.521smp #1 smp
mon aug 16 09:25:06 edt 2004 i686 athlon i386 gnulinux '
config_args='-des -Doptimize=-O2 -g -pipe -march=i386 -mcpu=i686
-Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc -Dcf_by=Red
Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux
-Dvendorprefix=/usr -Dsiteprefix=/usr
-Dotherlibdirs=/usr/lib/perl5/5.8.0 -Duseshrplib -Dusethreads
-Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db
-Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio
-Dinstallusrbinperl -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less
-isr'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBUGGING -fno-strict-aliasing -I/usr/local/include
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
optimize='-O2 -g -pipe -march=i386 -mcpu=i686',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING
-fno-strict-aliasing -I/usr/local/include -I/usr/include/gdbm'
ccversion='', gccversion='3.2.2 20030222 (Red Hat Linux 3.2.2-5)',
gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lpthread -lc -lcrypt -lutil
perllibs=-lnsl -ldl -lm -lpthread -lc -lcrypt -lutil
libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.2'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic
-Wl,-rpath,/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE'
cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
Note though that I have had to go back to 2.x since 3.x was not also
performing any backups and I just don't have time right now to do a lot
of troubleshooting on it. The logs showed backups being performed, but
none were shown on the system home pages and no errors in any of the
logs. Would need to check out the systems and see if the logins for
rsync over ssh occurred or not, etc - but as I noted, time is too short
right now. Will try 3.x again at a later stage in development most
likely, or if I get more time to try again and do some troubleshooting.
Chris
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
BackupPC-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/backuppc-users
http://backuppc.sourceforge.net/
