both options above work well but i prefer the mount on /var/lib/backuppc
method.
On Feb 4, 2008 1:03 PM, Nils Breunese (Lemonbit) <[EMAIL PROTECTED]> wrote:
> Jocke wrote:
>
> > I also are thinking of moving the backuppc storage and have read
> > about the new mount. I have backuppc installed, so what should be
> > the work process here?
> >
> > 1. Backup /var/lib/backuppc with tar
> > 2. Delete /var/lib/backuppc
> > 3. Mount the new disk at /var/lib/backuppc
> > 4. Restore the tar'ed backup at /var/lib/backuppc
> >
> > Would that be correct?
>
> That ought to work. You could also move the data in one go:
>
> (0. Stop BackupPC)
> 1. Mount the new drive somewhere (e.g. /mnt/temp)
> 2. Move all data from the old to the new location
> 3. Unmount the old and new drive
> 4. Mount the new drive on /var/lib/backuppc
> (4. Start BackupPC)
>
> Nils Breunese.
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> BackupPC-users mailing list
> [email protected]
> List: https://lists.sourceforge.net/lists/listinfo/backuppc-users
> Wiki: http://backuppc.wiki.sourceforge.net
> Project: http://backuppc.sourceforge.net/
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
BackupPC-users mailing list
[email protected]
List: https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki: http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/
