On Thu, Feb 28, 2013 at 3:39 PM, Adam Goryachev <a...@websitemanagers.com.au> wrote: > Quick reply, it needs the path to at on the windows machine, not the Linux > machine.
wow, all this time I thought this was linux side. Thanks!! When I do which at on windows, I see , /cygdrive/c/WINDOWS/system32/at . Is that correct path? > > Hope that helps. > > Regards, > Adam > > Sent from my mobile > Adam Goryachev > Website Managers > http://www.websitemanagers.com.au > > On 01/03/2013, at 6:17, upen <upendra.gan...@gmail.com> wrote: > >> Thanks. >> >> On Thu, Feb 28, 2013 at 1:02 PM, Kris Lou <k...@themusiclink.net> wrote: >>> How far have you traced the script execution chain? You should see winexe >>> do call the appropriate scripts on the server side, and then a number of >>> scripts also executing on the client side. >>> >>>>> /tmp/backuppc/preusercmd.sh: line 13: at: command not found >>> Also, I specify the full path to "at" for this. >> >> I will try the full path now. However, I did su - backuppc account on >> backup server and noted 'at' was in the path. I will give the full >> path a try now. >> >>> >>>>> Error connecting to module C at a.b.c.d:873: auth failed on module C >>> Check your auth.sh, and your rsyncd.conf/rsync.secrets on the client side? >> >> Actually, auth.sh and rsyncd.conf/rsync.secrets was configured >> correctly. I went over that again and again. User mentioned in >> rsyncd.conf was configured in rsync.secrets in user:pw format. I must >> mention, the windows client installer, though it asked for >> username/password, installer didn't put anything in rsync.secrets and >> rsyncd.conf which I realized some time after installation(but before >> posting here) and winxp was rebooted after those files were modified. >> >> What made the dump working for me was below two additional settings, >> $Conf{RsyncdPasswd} = 'Ba....'; >> $Conf{RsyncdUserName} = 'backuppc'; >> >> backuppc is the user I have in rsynced.conf/rsync.secrets/auth.sh and >> in windowsxp's backup configuration file (.pl) where the above two >> parameters are configured. >> >> I didn't see any mention of this step on the blog. I hope the two >> parameters configured above are part of the process. If not then >> something isn't working the way it should. >> >> >>> On Thu, Feb 28, 2013 at 7:53 AM, upen <upendra.gan...@gmail.com> wrote: >>>> >>>> Hi, >>>> >>>> I have been trying to configure my winxp box to use the method from >>>> http://www.michaelstowe.com/backuppc/ >>>> >>>> I emailed the blog owner but it's possible they are busy so haven't >>>> heard from them. Any help is appreciated. >>>> >>>> Here is the dump tried from command prompt. >>>> >>>> BackupPC_dump -v -f a.b.c.d >>>> cmdSystemOrEval: about to system /tmp/backuppc/wol.sh -c 1 -w 3 a.b.c.d >>>> cmdSystemOrEval: finished: got output Backuppc pinging -c 1 -w 3 a.b.c.d >>>> PING a.b.c.d (1.2.3.4) 56(84) bytes of data. >>>> 64 bytes from a.b.c.d (1.2.3.4): icmp_seq=1 ttl=128 time=0.367 ms >>>> >>>> --- a.b.c.d ping statistics --- >>>> 1 packets transmitted, 1 received, 0% packet loss, time 0ms >>>> rtt min/avg/max/mdev = 0.367/0.367/0.367/0.000 ms >>>> Previous state preserved: ON >>>> >>>> cmdSystemOrEval: about to system /tmp/backuppc/wol.sh -c 1 -w 3 a.b.c.d >>>> cmdSystemOrEval: finished: got output Backuppc pinging -c 1 -w 3 a.b.c.d >>>> PING a.b.c.d (1.2.3.4) 56(84) bytes of data. >>>> 64 bytes from a.b.c.d (1.2.3.4): icmp_seq=1 ttl=128 time=0.353 ms >>>> >>>> --- a.b.c.d ping statistics --- >>>> 1 packets transmitted, 1 received, 0% packet loss, time 0ms >>>> rtt min/avg/max/mdev = 0.353/0.353/0.353/0.000 ms >>>> Previous state preserved: ON >>>> >>>> CheckHostAlive: returning 0.353 >>>> Executing DumpPreUserCmd: /tmp/backuppc/preusercmd.sh a.b.c.d >>>> cmdSystemOrEval: about to system /tmp/backuppc/preusercmd.sh a.b.c.d >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "public" >>>> Ignoring unknown parameter "public" >>>> Unknown parameter encountered: "writable" >>>> Ignoring unknown parameter "writable" >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "public" >>>> Ignoring unknown parameter "public" >>>> Unknown parameter encountered: "writable" >>>> Ignoring unknown parameter "writable" >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "public" >>>> Ignoring unknown parameter "public" >>>> Unknown parameter encountered: "writable" >>>> Ignoring unknown parameter "writable" >>>> Microsoft (R) Windows Script Host Version 5.7 >>>> Copyright (C) Microsoft Corporation. All rights reserved. >>>> >>>> >>>> /tmp/backuppc/preusercmd.sh: line 13: at: command not found >>>> cmdSystemOrEval: finished: got output Unknown parameter encountered: >>>> "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "public" >>>> Ignoring unknown parameter "public" >>>> Unknown parameter encountered: "writable" >>>> Ignoring unknown parameter "writable" >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "public" >>>> Ignoring unknown parameter "public" >>>> Unknown parameter encountered: "writable" >>>> Ignoring unknown parameter "writable" >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "public" >>>> Ignoring unknown parameter "public" >>>> Unknown parameter encountered: "writable" >>>> Ignoring unknown parameter "writable" >>>> Microsoft (R) Windows Script Host Version 5.7 >>>> Copyright (C) Microsoft Corporation. All rights reserved. >>>> >>>> >>>> /tmp/backuppc/preusercmd.sh: line 13: at: command not found >>>> >>>> full backup started for directory C (baseline backup #3) >>>> started full dump, share=C >>>> Connected to a.b.c.d:873, remote version 30 >>>> Negotiated protocol version 28 >>>> Error connecting to module C at a.b.c.d:873: auth failed on module C >>>> Executing DumpPostUserCmd: /tmp/backuppc/postusercmd.sh a.b.c.d 0 >>>> cmdSystemOrEval: about to system /tmp/backuppc/postusercmd.sh a.b.c.d 0 >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "public" >>>> Ignoring unknown parameter "public" >>>> Unknown parameter encountered: "writable" >>>> Ignoring unknown parameter "writable" >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "public" >>>> Ignoring unknown parameter "public" >>>> Unknown parameter encountered: "writable" >>>> Ignoring unknown parameter "writable" >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "public" >>>> Ignoring unknown parameter "public" >>>> Unknown parameter encountered: "writable" >>>> Ignoring unknown parameter "writable" >>>> Rsync and shadow copy unloaded >>>> cmdSystemOrEval: finished: got output Unknown parameter encountered: >>>> "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "public" >>>> Ignoring unknown parameter "public" >>>> Unknown parameter encountered: "writable" >>>> Ignoring unknown parameter "writable" >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "public" >>>> Ignoring unknown parameter "public" >>>> Unknown parameter encountered: "writable" >>>> Ignoring unknown parameter "writable" >>>> Unknown parameter encountered: "valid users" >>>> Ignoring unknown parameter "valid users" >>>> Unknown parameter encountered: "public" >>>> Ignoring unknown parameter "public" >>>> Unknown parameter encountered: "writable" >>>> Ignoring unknown parameter "writable" >>>> Rsync and shadow copy unloaded >>>> >>>> Got fatal error during xfer (auth failed on module C) >>>> cmdSystemOrEval: about to system /tmp/backuppc/wol.sh -c 1 -w 3 a.b.c.d >>>> cmdSystemOrEval: finished: got output Backuppc pinging -c 1 -w 3 a.b.c.d >>>> PING a.b.c.d (1.2.3.4) 56(84) bytes of data. >>>> 64 bytes from a.b.c.d (1.2.3.4): icmp_seq=1 ttl=128 time=0.376 ms >>>> >>>> --- a.b.c.d ping statistics --- >>>> 1 packets transmitted, 1 received, 0% packet loss, time 0ms >>>> rtt min/avg/max/mdev = 0.376/0.376/0.376/0.000 ms >>>> Previous state preserved: ON >>>> >>>> cmdSystemOrEval: about to system /tmp/backuppc/wol.sh -c 1 -w 3 a.b.c.d >>>> cmdSystemOrEval: finished: got output Backuppc pinging -c 1 -w 3 a.b.c.d >>>> PING a.b.c.d (1.2.3.4) 56(84) bytes of data. >>>> 64 bytes from a.b.c.d (1.2.3.4): icmp_seq=1 ttl=128 time=2.75 ms >>>> >>>> --- a.b.c.d ping statistics --- >>>> 1 packets transmitted, 1 received, 0% packet loss, time 0ms >>>> rtt min/avg/max/mdev = 2.753/2.753/2.753/0.000 ms >>>> Previous state preserved: ON >>>> >>>> CheckHostAlive: returning 2.753 >>>> Backup aborted (auth failed on module C) >>>> Not saving this as a partial backup since it has fewer files than the >>>> prior one (got 0 and 0 files versus 0) >>>> dump failed: auth failed on module C >>>> >>>> >>>> Thanks. >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> Everyone hates slow websites. So do we. >>>> Make your web apps faster with AppDynamics >>>> Download AppDynamics Lite for free today: >>>> http://p.sf.net/sfu/appdyn_d2d_feb >>>> _______________________________________________ >>>> BackupPC-users mailing list >>>> BackupPC-users@lists.sourceforge.net >>>> List: https://lists.sourceforge.net/lists/listinfo/backuppc-users >>>> Wiki: http://backuppc.wiki.sourceforge.net >>>> Project: http://backuppc.sourceforge.net/ >>> >>> >> >> >> >> -- >> upen, >> emerge -uD life (Upgrade Life with dependencies) >> >> ------------------------------------------------------------------------------ >> Everyone hates slow websites. So do we. >> Make your web apps faster with AppDynamics >> Download AppDynamics Lite for free today: >> http://p.sf.net/sfu/appdyn_d2d_feb >> _______________________________________________ >> BackupPC-users mailing list >> BackupPC-users@lists.sourceforge.net >> List: https://lists.sourceforge.net/lists/listinfo/backuppc-users >> Wiki: http://backuppc.wiki.sourceforge.net >> Project: http://backuppc.sourceforge.net/ -- upen, emerge -uD life (Upgrade Life with dependencies) ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb _______________________________________________ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net List: https://lists.sourceforge.net/lists/listinfo/backuppc-users Wiki: http://backuppc.wiki.sourceforge.net Project: http://backuppc.sourceforge.net/
