I captured the network packages with tcpdump. There are the last rows if it helps you:
17:15:47.974113 IP 192.168.1.13.52202 > 192.168.1.13.rsync: Flags [P.], seq 872185:905151, ack 32293747, win 19047, options [nop,nop,TS val 1217113361 ecr 1217092736], length 32966 17:15:48.012397 IP 192.168.1.13.rsync > 192.168.1.13.52202: Flags [.], ack 905151, win 651, options [nop,nop,TS val 1217113371 ecr 1217113361], length 0 17:16:25.792430 IP 192.168.1.13.rsync > 192.168.1.13.52202: Flags [.], seq 32293747:32359230, ack 905151, win 651, options [nop,nop,TS val 1217122816 ecr 1217113361], length 65483 17:18:17.188110 IP 192.168.1.13.52202 > 192.168.1.13.rsync: Flags [P.], seq 905151:937925, ack 32293747, win 19047, options [nop,nop,TS val 1217150664 ecr 1217122816], length 32774 17:18:17.188139 IP 192.168.1.13.rsync > 192.168.1.13.52202: Flags [.], ack 937925, win 519, options [nop,nop,TS val 1217150664 ecr 1217150664], length 0 17:18:26.112415 IP 192.168.1.13.rsync > 192.168.1.13.52202: Flags [.], seq 32293747:32359230, ack 937925, win 519, options [nop,nop,TS val 1217152896 ecr 1217150664], length 65483 17:18:38.498664 IP 192.168.1.13.52202 > 192.168.1.13.rsync: Flags [P.], seq 937925:970705, ack 32293747, win 19047, options [nop,nop,TS val 1217155992 ecr 1217152896], length 32780 17:18:38.536389 IP 192.168.1.13.rsync > 192.168.1.13.52202: Flags [.], ack 970705, win 388, options [nop,nop,TS val 1217156002 ecr 1217155992], length 0 17:18:43.795400 IP 192.168.1.13.52202 > 192.168.1.13.rsync: Flags [P.], seq 970705:1004881, ack 32293747, win 19047, options [nop,nop,TS val 1217157316 ecr 1217152896], length 34176 17:18:43.832389 IP 192.168.1.13.rsync > 192.168.1.13.52202: Flags [.], ack 1004881, win 121, options [nop,nop,TS val 1217157326 ecr 1217157316], length 0 17:29:15.660423 IP 192.168.1.13.52202 > 192.168.1.13.rsync: Flags [P.], seq 1004881:1020369, ack 32293747, win 19047, options [nop,nop,TS val 1217315283 ecr 1217152896], length 15488 17:29:15.660445 IP 192.168.1.13.rsync > 192.168.1.13.52202: Flags [R], seq 3811472093, win 0, length 0 This happened after manually triggering an incremental backup. Am 07.03.2016 um 16:58 schrieb Nicolas Göddel: > Is there a point where I can begin debugging that issue? Is it not getting > better at the moment and I need my daily backups. Is it possible to use rsync > without the daemon and network communication? For example with 'rsync' as > XferMethod? > > Am 02.03.2016 um 14:35 schrieb Nicolas Göddel: >> Am 02.03.2016 um 14:08 schrieb Stefan Peter: >>> Dear Nicolas Göddel >>> Am 02.03.2016 um 11:41 schrieb Nicolas Göddel: >>>> Hi, >>>> >>>> thank you. I did an incremental backup with verbose output. The last few >>>> lines >>>> in the log are these: >>>> >>>> attribWrite(dir=fbenutzer/.Trashes/501/Recovered files >>>> #1/com.apple.iBooksAuthor_409_SFED_368025537_2/SpookySpooky.ibooks/OPS/assets/thumbs/content13) >>>> -> /var/lib/backuppc/pc/suw03/new/fbenutzer/f.Trashes/f501/fRecovered files >>>> #1/fcom.apple.iBooksAuthor_409_SFED_368025537_2/fSpookySpooky.ibooks/fOPS/fassets/fthumbs/fcontent13/attrib >>>> Done: 0 files, 0 bytes >>>> Got fatal error during xfer (aborted by signal=PIPE) >>>> Backup aborted by user signal >>>> dump failed: aborted by signal=PIPE >>> This didn't reveal additional information, so I would propose to have a >>> look at the other end of the backup. >>> >>> According to the first mail you wrote, you are using the rsyncd transfer >>> method. So, according to my experience, signal=PIPE errors most of the >>> time are caused by timeouts. Although the rsyncd has no default I/O >>> timeout, most default rsyncd.conf files use something along the lines of >>> 600 seconds. >>> >>> Can you check your /etc/rsyncd for a timeout=... parameter? >>> If you find one, double the amount, restart rsyncd and retry your backup. >> I already added the line timeout=604800 to /etc/rsyncd.conf and restarted >> rsync >> by myself as daemon. >>> If there is no timeout to be found in rsyncd.conf, it may be specified >>> on the command line of the rsyncd startup script. A 'ps faxw|grep rsync' >>> should reveal it. >> rsync was started using the command: rsync --daemon >>> If this does not help, finding the logs for rsyncd may shed some more >>> lights on the problem. Because AFAIK there is no standard rsyncd.conf >>> for Debian/Ubuntu, check your config file for 'log file' and 'syslog >>> faclities' entries. These define where rsyncd will put the log files. >>> You can find out more about these entries by issuing "man rsyncd.con". >> I also set up a user defined log file. These are the lines from the manual >> test >> today: >> >> 2016/03/02 10:35:38 [27279] name lookup failed for 192.168.1.13: Name or >> service >> not known >> 2016/03/02 10:35:38 [27279] connect from UNKNOWN (192.168.1.13) >> 2016/03/02 09:35:38 [27279] rsync on . from backuppc@UNKNOWN (192.168.1.13) >> 2016/03/02 09:35:38 [27279] building file list >> 2016/03/02 10:35:57 [27286] name lookup failed for 192.168.1.13: Name or >> service >> not known >> 2016/03/02 10:35:57 [27286] connect from UNKNOWN (192.168.1.13) >> 2016/03/02 09:35:57 [27286] rsync on . from backuppc@UNKNOWN (192.168.1.13) >> 2016/03/02 09:35:57 [27286] building file list >> 2016/03/02 09:35:58 [27279] rsync: [sender] write error: Broken pipe (32) >> 2016/03/02 09:35:58 [27279] rsync error: error in socket IO (code 10) at >> io.c(820) [sender=3.1.1] >> 2016/03/02 10:08:09 [27286] UNKNOWN send Mitarbeiter/xxx/001 >> Privado/Stunden/Time sheet_neu .xlsx 26183 13967 >> 2016/03/02 10:08:09 [27286] UNKNOWN send Mitarbeiter/xxx/002 >> Webseiten/Ebook.xxx/Bilder/Beispiele/Vorher_Nachher.jpg 591907 592023 >> 2016/03/02 10:23:48 [27286] rsync: [sender] write error: Connection timed >> out (110) >> 2016/03/02 10:23:48 [27286] rsync error: error in socket IO (code 10) at >> io.c(820) [sender=3.1.1] >> >> Because rsync has a little problem with the current timezone the date is >> somehow >> confusing. >> See also: https://bugzilla.samba.org/show_bug.cgi?id=2607 >>> With kind regards >>> >>> Stefan Peter >>> >>> >>> >>> ------------------------------------------------------------------------------ >>> Site24x7 APM Insight: Get Deep Visibility into Application Performance >>> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month >>> Monitor end-to-end web transactions and take corrective actions now >>> Troubleshoot faster and improve end-user experience. Signup Now! >>> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 >>> _______________________________________________ >>> BackupPC-users mailing list >>> BackupPC-users@lists.sourceforge.net >>> List: https://lists.sourceforge.net/lists/listinfo/backuppc-users >>> Wiki: http://backuppc.wiki.sourceforge.net >>> Project: http://backuppc.sourceforge.net/ > -- —————————————————————————————————————————————— Homepage: http://freakscorner.de Facebook: http://www.facebook.com/Bastelkeller Twitter: http://twitter.com/freaks_corner Youtube: http://youtube.com/tubenic86 ------------------------------------------------------------------------------ Transform Data into Opportunity. Accelerate data analysis in your applications with Intel Data Analytics Acceleration Library. Click to learn more. http://makebettercode.com/inteldaal-eval _______________________________________________ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net List: https://lists.sourceforge.net/lists/listinfo/backuppc-users Wiki: http://backuppc.wiki.sourceforge.net Project: http://backuppc.sourceforge.net/