Hello,
Thanks for answer, I have managed to set up copy tape to tape and it works.
I have 2 questions:
1. After installing ver 2.5.12 it worked fine but once I have changed some
config in bacula-dir.conf I coudn't start Director error I had was:
15-Oct 18:41 bacula-dir JobId 0: Fatal error: Could not open Catalog
"MyCatalog", database "bacula".
15-Oct 18:41 bacula-dir JobId 0: Fatal error: Version error for database
"bacula". Wanted 10, got 11
15-Oct 18:41 bacula-dir ERROR TERMINATION
Please correct configuration file: /etc/bacula/bacula-dir.conf
After this I had to restore my database from backup and then it worked fine.
Is there needed to upgrade bacula database after installation? I've upgraded
from 2.4.2 to 2.5.12.
2. I want to run ClientRunAfterJob after copy Job (script that cleans files
from backuped folder) but is seems to omit that, what can be wrong?
_____________________
My config is:
_____________________
JobDefs {
Name = "DefaultJob"
Type = Backup
Level = Incremental
Client = serwer_bacula-fd
FileSet = "serwer_baculaFS"
Schedule = "WeeklyCycle"
Messages = Standard
Pool = VTS1ARCH
Priority = 10
}
FileSet {
Name = "serwer_baculaFS"
Include {
Options {
signature = MD5
}
File = /tmp/test1/
}
}
Job {
Name = "Serwer_backupu"
JobDefs = "DefaultJob"
Write Bootstrap = "/var/bacula/working/serwer_bacula.bsr"
ClientRunBeforeJob = "/etc/bacula/move_archived_exports"
RunAfterJob = "/etc/bacula/run_kopia_job"
}
Job {
Name = "Serwer_backupukopia"
Type = Copy
Level = Full
Client = serwer_bacula-fd
FileSet = "Full Set"
Messages = Standard
Pool = VTS1ARCH
Selection Type = SQLQuery
Selection Pattern = "SELECT MAX(JobId) FROM Job WHERE
Name='Serwer_backupu' AND JobStatus ='T';"
ClientRunAfterJob = "/etc/bacula/delete_archived_exports"
<- it's not running
}
############################################################################
##############################################
I'll attach some log, it's a bit long , sorry...
16-Oct 00:14 serwer_bacula JobId 18115: Start Backup JobId 18115,
Job=Serwer_backupu.2008-10-16_00.14.03
16-Oct 00:14 serwer_bacula JobId 18115: Using Device "Drive-2"
16-Oct 00:14 serwer_bacula-fd JobId 18115: shell command: run
ClientRunBeforeJob "/etc/bacula/move_archived_exports"
16-Oct 00:14 serwer_bacula-sd JobId 18115: 3307 Issuing autochanger "unload
slot 4012, drive 0" command.
16-Oct 00:14 serwer_bacula-sd JobId 18115: 3304 Issuing autochanger "load
slot 4013, drive 0" command.
16-Oct 00:14 serwer_bacula-sd JobId 18115: 3305 Autochanger "load slot 4013,
drive 0", status is OK.
16-Oct 00:14 serwer_bacula-sd JobId 18115: Wrote label to prelabeled Volume
"Y04013" on device "Drive-2" (/dev/tape2)
16-Oct 00:14 serwer_bacula JobId 18115: Max Volume jobs exceeded. Marking
Volume "Y04013" as Used.
16-Oct 00:14 serwer_bacula-sd JobId 18115: Job write elapsed time =
00:00:01, Transfer rate = 11.01 M bytes/second
16-Oct 00:14 serwer_bacula JobId 18115: Bacula serwer_bacula 2.5.12
(07Oct08): 16-Oct-2008 00:14:36
Build OS: s390x-ibm-linux-gnu suse 10
JobId: 18115
Job: Serwer_backupu.2008-10-16_00.14.03
Backup Level: Incremental, since=2008-10-16 00:07:48
Client: "serwer_bacula-fd" 2.5.12 (07Oct08)
s390x-ibm-linux-gnu,suse,10
FileSet: "serwer_baculaFS" 2008-10-15 19:11:02
Pool: "VTS1ARCH" (From Job resource)
Catalog: "MyCatalog" (From Client resource)
Storage: "VTS-Robot" (From Pool resource)
Scheduled time: 16-Oct-2008 00:14:04
Start time: 16-Oct-2008 00:14:08
End time: 16-Oct-2008 00:14:36
Elapsed time: 28 secs
Priority: 10
FD Files Written: 2
SD Files Written: 2
FD Bytes Written: 11,013,921 (11.01 MB)
SD Bytes Written: 11,014,095 (11.01 MB)
Rate: 393.4 KB/s
Software Compression: None
VSS: no
Encryption: no
Accurate: no
Volume name(s): Y04013
Volume Session Id: 1
Volume Session Time: 1224108791
Last Volume Bytes: 11,096,064 (11.09 MB)
Non-fatal FD errors: 0
SD Errors: 0
FD termination status: OK
SD termination status: OK
Termination: Backup OK
16-Oct 00:14 serwer_bacula JobId 18115: Begin pruning Jobs.
16-Oct 00:14 serwer_bacula JobId 18115: No Jobs found to prune.
16-Oct 00:14 serwer_bacula JobId 18115: Begin pruning Files.
16-Oct 00:14 serwer_bacula JobId 18115: No Files found to prune.
16-Oct 00:14 serwer_bacula JobId 18115: End auto prune.
16-Oct 00:14 serwer_bacula JobId 18115: shell command: run AfterJob
"/etc/bacula/run_kopia_job"
16-Oct 00:14 serwer_bacula JobId 18115: AfterJob: Connecting to Director
126.177.54.98:9101
16-Oct 00:14 serwer_bacula JobId 18115: AfterJob: 1000 OK: serwer_bacula
Version: 2.5.12 (07 October 2008)
16-Oct 00:14 serwer_bacula JobId 18115: AfterJob: Enter a period to cancel a
command.
16-Oct 00:14 serwer_bacula JobId 18115: AfterJob: @output
/etc/bacula/bacula.out
16-Oct 00:14 serwer_bacula JobId 18116: The following 1 JobId was chosen to
be copied: 18115
16-Oct 00:14 serwer_bacula JobId 18116: Copying using JobId=18115
Job=Serwer_backupu.2008-10-16_00.14.03
16-Oct 00:14 serwer_bacula JobId 18116: Bootstrap records written to
/var/bacula/working/serwer_bacula.restore.1.bsr
16-Oct 00:14 serwer_bacula JobId 18116: Start Copying JobId 18116,
Job=Serwer_backupukopia.2008-10-16_00.14.05
16-Oct 00:14 serwer_bacula JobId 18116: Using Device "Drive-4"
16-Oct 00:14 serwer_bacula-sd JobId 18116: Ready to read from volume
"Y04013" on device "Drive-2" (/dev/tape2).
16-Oct 00:14 serwer_bacula-sd JobId 18116: 3307 Issuing autochanger "unload
slot 4007, drive 0" command.
16-Oct 00:14 serwer_bacula-sd JobId 18116: 3304 Issuing autochanger "load
slot 4008, drive 0" command.
16-Oct 00:21 serwer_bacula-sd JobId 18116: 3305 Autochanger "load slot 4008,
drive 0", status is OK.
16-Oct 00:22 serwer_bacula-sd JobId 18116: Wrote label to prelabeled Volume
"Y54008" on device "Drive-4" (/dev/tape4)
16-Oct 00:22 serwer_bacula JobId 18116: Max Volume jobs exceeded. Marking
Volume "Y54008" as Used.
16-Oct 00:22 serwer_bacula-sd JobId 18116: Forward spacing Volume "Y04013"
to file:block 1:1.
16-Oct 00:22 serwer_bacula-sd JobId 18116: End of file 2 on device "Drive-2"
(/dev/tape2), Volume "Y04013"
16-Oct 00:22 serwer_bacula-sd JobId 18116: End of file 3 on device "Drive-2"
(/dev/tape2), Volume "Y04013"
16-Oct 00:22 serwer_bacula-sd JobId 18116: End of Volume at file 3 on device
"Drive-2" (/dev/tape2), Volume "Y04013"
16-Oct 00:22 serwer_bacula-sd JobId 18116: End of all volumes.
16-Oct 00:22 serwer_bacula JobId 18116: Bacula serwer_bacula 2.5.12
(07Oct08): 16-Oct-2008 00:22:02
Build OS: s390x-ibm-linux-gnu suse 10
Prev Backup JobId: 18115
New Backup JobId: 18117
Current JobId: 18116
Current Job: Serwer_backupukopia.2008-10-16_00.14.05
Backup Level: Full
Client: serwer_bacula-fd
FileSet: "Full Set" 2007-10-20 23:05:00
Read Pool: "VTS1ARCH" (From Job resource)
Read Storage: "VTS-Robot" (From Pool resource)
Write Pool: "VTS2ARCH" (From Job Pool's NextPool resource)
Write Storage: "VTS-Robot2" (From Storage from Pool's NextPool
resource)
Catalog: "MyCatalog" (From Client resource)
Start time: 16-Oct-2008 00:14:38
End time: 16-Oct-2008 00:22:02
Elapsed time: 7 mins 24 secs
Priority: 10
SD Files Written: 2
SD Bytes Written: 11,014,095 (11.01 MB)
Rate: 24.8 KB/s
Volume name(s): Y54008
Volume Session Id: 2
Volume Session Time: 1224108791
Last Volume Bytes: 11,096,064 (11.09 MB)
SD Errors: 0
SD termination status: OK
Termination: Copying OK
16-Oct 00:22 serwer_bacula JobId 18116: Begin pruning Jobs.
16-Oct 00:22 serwer_bacula JobId 18116: No Jobs found to prune.
16-Oct 00:22 serwer_bacula JobId 18116: Begin pruning Files.
16-Oct 00:22 serwer_bacula JobId 18116: No Files found to prune.
16-Oct 00:22 serwer_bacula JobId 18116: End auto prune.
Best regards,
Tomasz
-----Wiadomość oryginalna-----
Od: Kern Sibbald [mailto:[EMAIL PROTECTED]
Wysłano: 8 października 2008 15:32
Do: [email protected]
DW: [EMAIL PROTECTED]
Temat: Re: [Bacula-devel] Bacula copy pools , volumes option
On Wednesday 08 October 2008 09:01:41 [EMAIL PROTECTED] wrote:
> Hello,
>
> I'd like to ask if it is planed to implement copy pools , volumes in
> new version of bacula. It would be great functionality. I would be
> able to make copies of backed-up data from tape to tape into few pools
> without running the same job with different pool setting.
>
> I'm very interested in testing this solution if there is any beta
> version we can test.
Yes, this functionality exists in the current development version of Bacula.
If you want to know about the new features, please see:
http://www.bacula.org/manuals/en/concepts/concepts/New_Features.html
Best regards,
Kern
>
> Best regards,
>
> Tomasz
>
> ----------------------------------------------------------------------
> Dodaj strone www do katalogu. Pokaz ze istniejesz!
> Sprawdz jak >> http://link.interia.pl/f1f2a
>
>
>
> ----------------------------------------------------------------------
> --- This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge Build the coolest Linux based applications with Moblin SDK &
> win great prizes Grand prize is a trip for two to an Open Source event
> anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Bacula-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-devel
----------------------------------------------------------------------
Zobacz najlepsze oferty nieruchomosci!
Sprawdz >>> http://link.interia.pl/f1f46
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-devel
