Hello, Sorry, I was too jet lagged yesterday afternoon, so I asked an incomplete question. Would you please run it one more time and add just after the "list volumes" a:
llist volume=TestVolume0001 Note, it really is "llist" with two l's. This will tell us if your retention periods are setup correctly. I suspect they might be wrong, which is causing the pruning. If they are OK, then we have some strange pruning bug ... Regards, Kern PS: you have done a good job creating a test. I wish more people would do so, but there are just two more steps. 1. (a bit painful) is to convert your new xxx-director.conf into a xxx-director.conf.in by replacing all the "variable" parameters by @xxx@ keywords. Then 2. (trivial) adding one new line in scripts/do_sed to cause the xxx-director.conf to be created using your config file parameters by substituting them into the xxx.bacula-dir.conf.in file. On Friday 14 November 2008 17:51:23 Graham Keeling wrote: > On Fri, Nov 14, 2008 at 05:13:52PM +0100, Kern Sibbald wrote: > > On Tuesday 11 November 2008 12:51:56 Graham Keeling wrote: > > > Hello, > > > > > > Since my last email, I found out that you only need one director, one > > > file daemon, and one storage daemon in order to see the problem. > > > > > > Since there has been no response to my last email, I tried to come up > > > with an easy way for others to demonstrate it for themselves. > > > > > > So, I made a regress test. > > > > > > I've called the test 'broken-media-bug-test', and it does this: > > > a) creates a huge 300M file in the build directory > > > b) starts job "First" (using fileset Set1) backing up the build > > > directory c) waits 5 seconds > > > d) starts job "Second" (using fileset Set2) backing up the build > > > directory e) waits for both jobs to finish > > > f) tries to restore the build directory using fileset Set1. > > > > > > The restore doesn't manage to restore all the files, and looking back > > > at the debug output, you can see the volume that the first backup > > > creates being stomped on by the second backup. > > > > > > The patch for the test is attached, along with a file containing the > > > REGRESS_DEBUG=1 output that it gives. The problem can be seen in the > > > output around line 453, where it decides to purge the Volume. > > > > Please add a "list volumes" after step c and send us the job output. > > OK, it says this (I've also turned on some debug for the director). The > full output for this run is also attached, along with my regress config > file (without my email address). > > > setdebug level=150 Director > localhost-dir: ua_cmds.c:951-0 setdebug:setdebug level=150 Director: > list volumes > localhost-dir: ua_cmds.c:1931-0 UA Open database > localhost-dir: ua_cmds.c:1950-0 DB regress opened > localhost-dir: ua_output.c:255-0 list: list volumes > Automatically selected Catalog: MyCatalog > Using Catalog "MyCatalog" > Pool: Default > +---------+----------------+-----------+---------+----------+----------+--- >----- ------+---------+------+-----------+-----------+-------------+ > > | MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles | > | VolRete > > ntion | Recycle | Slot | InChanger | MediaType | LastWritten | > +---------+----------------+-----------+---------+----------+----------+--- >----- ------+---------+------+-----------+-----------+-------------+ > > | 1 | TestVolume0001 | Used | 1 | 210 | 0 | > | 3153600 > > 0 | 1 | 0 | 0 | File | 0 | > +---------+----------------+-----------+---------+----------+----------+--- >----- ------+---------+------+-----------+-----------+-------------+ ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Bacula-devel mailing list Bacula-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-devel
