On Tuesday 10 March 2009 20:16:41 Tomasz Westrych wrote: > Thanks Kern for advice. > > I was able to find out where the problem was.
Great. > > For each Autochanger with one drive only Drive Index should = 0. Hmmm. Yes, I hadn't noticed that. Pretty important :-) Regards, Kern > > Regards, > > Tomasz > > -----Wiadomość oryginalna----- > Od: Kern Sibbald [mailto:k...@sibbald.com] > Wysłano: 9 marca 2009 16:32 > Do: bacula-devel@lists.sourceforge.net > DW: Tomasz Westrych > Temat: Re: [Bacula-devel] Device not found - problem > > I suggest you turn on debug level say 200 or 400 in the storage daemon. > That will give you a lot more information on why it is failing (probably > permissions problems). > > Regards, > > Kern > > On Monday 09 March 2009 08:52:27 Tomasz Westrych wrote: > > Hi, > > > > I've posted alredy on Bacula-user list but have no reply yet so mabye > > some of you can look at my config and tell if there is some mistake. > > > > We use serwer_bacula Version: 2.5.12 (07 October 2008). > > > > Problem is with autochanger and mounting volumes, when I want to mount > > volumes with bconsole I get "Device not found or could not be opened". > > I have 4 drives and problem is with 4: VTS-Robot_arch 5: > > VTS-Robot_arch2. When I start backup job with 4: VTS-Robot_arch or 5: > > VTS-Robot_arch2 it works fine autochanger loads volumes, mount and > > umounts etc. > > > > Manualy mounting is impossible. > > > > *mo > > The defined Storage resources are: > > 1: File > > 2: VTS-Robot > > 3: VTS-Robot2 > > 4: VTS-Robot_arch > > 5: VTS-Robot_arch2 > > Select Storage resource (1-5): 4 > > Enter autochanger slot: 0 > > 3999 Device "robotarch" not found or could not be opened. > > > > *mo > > Automatically selected Catalog: MyCatalog Using Catalog "MyCatalog" > > The defined Storage resources are: > > 1: File > > 2: VTS-Robot > > 3: VTS-Robot2 > > 4: VTS-Robot_arch > > 5: VTS-Robot_arch2 > > Select Storage resource (1-5): 5 > > Connecting to Storage daemon VTS-Robot_arch2 at serwer_bacula:9103 ... > > Enter autochanger slot: 1 > > 3999 Device "robotarchdrugi" not found or could not be opened. > > > > > > > > bacula-sd.conf: > > > > Autochanger { > > Name = robot > > Device = Drive-1 > > Changer Command = "/etc/bacula/mtx_vts.pl %c %o %S %a %d" > > Changer Device = 126.177.44.30:50200 } > > > > Autochanger { > > Name = robotarch > > Device = Drive-2 > > Changer Command = "/etc/bacula/mtx_vts.pl %c %o %S %a %d" > > Changer Device = 126.177.44.30:50200 } > > > > > > Device { > > Name = Drive-1 # > > Drive Index = 0 > > Media Type = VTS > > Archive Device = /dev/tape1 > > AutomaticMount = no; # when device opened, read it > > AlwaysOpen = yes; > > RemovableMedia = yes; > > RandomAccess = no; > > AutoChanger = yes; > > LabelMedia = yes; > > Label Type = IBM; > > Hardware End of Medium = no > > BSF at EOM = yes > > Backward Space Record = no > > Fast Forward Space File = no > > TWO EOF = yes > > Use MTIOCGET = no > > Maximum Changer Wait = 1h > > } > > > > Device { > > Name = Drive-2 > > Drive Index = 1 > > Media Type = VTS > > Archive Device = /dev/tape2 > > AutomaticMount = no; # when device opened, read it > > AlwaysOpen = yes; > > RemovableMedia = yes; > > RandomAccess = no; > > AutoChanger = yes; > > LabelMedia = yes; > > Label Type = IBM > > Hardware End of Medium = no > > BSF at EOM = yes > > Backward Space Record = no > > Fast Forward Space File = no > > TWO EOF = yes > > Use MTIOCGET = no > > Maximum Changer Wait = 1h > > } > > > > Autochanger { > > Name = robotdrugi > > Device = Drive-3 > > Changer Command = "/etc/bacula/mtx_vts.pl %c %o %S %a %d" > > Changer Device = 126.177.44.30:50400 > > } > > > > Autochanger { > > Name = robotarchdrugi > > Device = Drive-4 > > Changer Command = "/etc/bacula/mtx_vts.pl %c %o %S %a %d" > > Changer Device = 126.177.44.30:50400 > > } > > > > > > Device { > > Name = Drive-3 # > > Drive Index = 0 > > Media Type = VTS2 > > Archive Device = /dev/tape3 > > AutomaticMount = no; # when device opened, read it > > AlwaysOpen = yes; > > RemovableMedia = yes; > > RandomAccess = no; > > LabelMedia = yes; > > AutoChanger = yes > > Label Type = IBM > > Hardware End of Medium = no > > BSF at EOM = yes > > Backward Space Record = no > > Fast Forward Space File = no > > TWO EOF = yes > > Use MTIOCGET = no > > Maximum Changer Wait = 1h > > } > > > > Device { > > Name = Drive-4 > > Drive Index = 1 > > Media Type = VTS2 > > Archive Device = /dev/tape4 > > AutomaticMount = no; # when device opened, read it > > AlwaysOpen = yes; > > RemovableMedia = yes; > > RandomAccess = no; > > LabelMedia = yes; > > AutoChanger = yes > > Label Type = IBM > > Hardware End of Medium = no > > BSF at EOM = yes > > Backward Space Record = no > > Fast Forward Space File = no > > TWO EOF = yes > > Use MTIOCGET = no > > Maximum Changer Wait = 1h > > } > > > > > > bacula-dir.cfg: > > > > Storage { > > Name = VTS-Robot > > Address = serwer_bacula > > SDPort = 9103 > > Password = "xxx" > > Device = robot > > Media Type = VTS > > Autochanger = yes # enable for autochanger device > > } > > > > Storage { > > Name = VTS-Robot2 > > Address = serwer_bacula > > SDPort = 9103 > > Password = "xxx" > > Device = robotdrugi > > Media Type = VTS2 > > Autochanger = yes # enable for autochanger device > > } > > > > Storage { > > Name = VTS-Robot_arch > > Address = serwer_bacula > > SDPort = 9103 > > Password = "xxx" > > Device = robotarch > > Media Type = VTS > > Autochanger = yes > > } > > > > Storage { > > Name = VTS-Robot_arch2 > > Address = serwer_bacula > > SDPort = 9103 > > Password = "xxx" > > Device = robotarchdrugi > > Media Type = VTS2 > > Autochanger = yes > > } > > > > # Default pool definition > > Pool { > > Name = VTS > > Pool Type = Backup > > Maximum Volume Jobs = 1 > > Recycle = yes # Bacula can automatically recycle > > Volumes AutoPrune = yes # Prune expired volumes > > Volume Retention = 14 days > > Label Format = "Y0" > > } > > > > # Default pool definition > > Pool { > > Name = VTS2 > > Pool Type = Backup > > Maximum Volume Jobs = 1 > > Recycle = yes # Bacula can automatically recycle > > Volumes AutoPrune = yes # Prune expired volumes > > Volume Retention = 14 days > > Label Format = "Y5" > > } > > > > # Scratch pool definition > > Pool { > > Name = Scratch > > Pool Type = Backup > > } > > > > > > # Archive pool definition > > > > Pool { > > Name = VTS1ARCH > > Pool Type = Backup > > Maximum Volume Jobs = 1 > > Recycle = yes # Bacula can automatically recycle > > Volumes AutoPrune = yes # Prune expired volumes > > Next Pool = VTS2ARCH > > Storage = VTS-Robot_arch > > Volume Retention = 730 days > > } > > > > # Archive pool definition > > Pool { > > Name = VTS2ARCH > > Pool Type = Backup > > Maximum Volume Jobs = 1 > > Recycle = yes # Bacula can automatically recycle > > Volumes AutoPrune = yes # Prune expired volumes > > Storage = VTS-Robot_arch2 > > Volume Retention = 730 days > > } > > > > > > Thanks, > > > > Tomasz > > > > > > ---------------------------------------------------------------------- > > Program tylko dla graczy komputerowych! > > Ogladaj >>> http://link.interia.pl/f207f > > --------------------------------------------------------------------------- > > >--- Open Source Business Conference (OSBC), March 24-25, 2009, San > > Francisco, CA -OSBC tackles the biggest issue in open source: Open > > Sourcing > > > the Enterprise -Strategies to boost innovation and cut costs with open > > source participation -Receive a $600 discount off the registration fee > > with > > > the source code: SFAD http://p.sf.net/sfu/XcvMzF8H > > _______________________________________________ > > Bacula-devel mailing list > > Bacula-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/bacula-devel > > ---------------------------------------------------------------------- > "Teraz gry" - program dla prawdziwych graczy! >>> > http://link.interia.pl/f2080 > > > --------------------------------------------------------------------------- >--- _______________________________________________ > Bacula-devel mailing list > Bacula-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-devel ------------------------------------------------------------------------------ _______________________________________________ Bacula-devel mailing list Bacula-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-devel
