I'm setting up a new bacula system and I am running through the test setup steps listed in the manual. One step lists that I should do a btape fill test. I am getting a "Fatal Error" during WEOF but btape says the test passed.
Can I ignore this error? Here is the btape output with the error ... 09-Jun 18:15 btape JobId 0: 3304 Issuing autochanger "load slot 2, drive 0" command. 09-Jun 18:17 btape JobId 0: 3305 Autochanger "load slot 2, drive 0", status is OK. 09-Jun 18:17 btape: Fatal Error at dev.c:1705 because: dev.c:1704 Attempt to WEOF on non-appendable Volume Wrote Volume label for volume "TestVolume2". 09-Jun 18:17 btape JobId 0: Wrote label to prelabeled Volume "TestVolume2" on device "Drive0" (/dev/nst0) ... The last block of the first tape matches. ... The first block on the second tape matches. ... The last block on the second tape matches. Test succeeded. ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Bacula-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-devel
