OK, that change was a major step backward. I modified my Device resource for my tape drive as specified and added an Autochanger resource to my Director, and now with that change *alone*, BAT suddenly cannot browse Storages, Clients, Pools, FileSets, or Jobs. (However, it can still browse Media and Jobs Run.)
Trying to mount a tape using bconsole yielded the following: *mount storage=babylon5-sd Automatically selected Catalog: Catalog Using Catalog "Catalog" [ nothing happens ] *mount storage=babylon5-changer Connecting to Storage daemon babylon5-changer at babylon5.babcom.com:9103 ... 3998 Device ""LTO-4" (/dev/nst0)" is not an autochanger. Enter autochanger drive[0]: Enter autochanger slot: 1 No "Changer Command" for "LTO-4" (/dev/nst0). Manual load of Volume may be requird. 3901 Unable to open device ""LTO-4" (/dev/nst0)": ERR=tape_dev.c:170 Unable to open device "LTO-4" (/dev/nst0): ERR=No medium found -- Phil Stracchino Babylon Communications ph...@caerllewys.net p...@co.ordinate.org Landline: +1.603.293.8485 Mobile: +1.603.998.6958 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Bacula-devel mailing list Bacula-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-devel
