On 13 Mar 2005 at 10:41, Nathan R. Valentine wrote: > > I'm having fairly regular problems with bacula-sd not mounting tapes > either automagically per the Bacula config or via the "mount" command in > bacula-console. When the problem occurs, bacula-sd always reports > something like the following: > > > *mount > Automatically selected Storage: HP-Ultrium > 3001 OK mount. Device=/dev/st0
I see this too from time to time. Try another mount. Or an unmount followed by a mount. I suspect it's because the drive is still "settling". If you can see the drive, what is happening? What type of drive? -- Dan Langille : http://www.langille.org/ BSDCan - The Technical BSD Conference - http://www.bsdcan.org/ ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users
