Thanks for your quick response.
They are marked "full". When I "inherited" this setup, I noticed (using
the GUI), that all the tapes in my Oracle pool were marked "purge". I
have no idea why my predecessor did that, or if he even did it or bacula
did it unintentionally. Could that be the problem??
Here's my pool config. The Oracle pool is the one I'm having issues
with. Thanks.
# Default pool definition
Pool {
Name = Default
Pool Type = Backup
Recycle = yes # Bacula can automatically recycle
Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 365 days # one year
Accept Any Volume = yes # write on any volume in the pool
}
Pool {
Name = Windows
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 120 days
Accept Any Volume = yes
}
Pool {
Name = UnixOS
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 5 days
Accept Any Volume = yes
# Catalog Files = no
}
Pool {
Name = BrutusImages
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 5 days
Accept Any Volume = yes
Catalog Files = no
}
Pool {
Name = Oracle
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 10 days
Accept Any Volume = yes
-----Original Message-----
From: Phil Stracchino [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 04, 2005 8:46 AM
To: Lowe, Bryan
Cc: [email protected]
Subject: Re: [Bacula-users] Tapes full?
Lowe, Bryan wrote:
> Hello List-
>
> I'm a bacula newbie that inherited this bacula setup from my
> predecessor. It seems to work very well.
>
> I have 3 separate tape drives for 3 separate backup pools. They are
> Oracle, Unix, and Images. All 3 are set up exactly the same way,
except
> the Oracle jobs run nightly while the Unix and Images jobs only run
once
> a week.
>
> I'm having a problem with my Oracle backups that I can't seem to put
my
> finger on. I'm using SuperDLT tapes, 160GB/320GB. However, when
bacula
> writes to the tape, it says that the tape is full only after writing
> less than 1GB! Sometimes it will only write like 7MB! Then it prompts
me
> for the next available tape. I can verify that I'm not having this
> problem if dumping directly to tape from command line. I also tried
> putting through a cleaning tape. Does anyone have any idea what could
> cause this, or where I should start looking?
Are they marked "Full" or "Used"?
What does your Pool configuration look like?
--
Phil Stracchino [EMAIL PROTECTED]
Renaissance Man, Unix generalist, Perl hacker
Mobile: 603-216-7037 Landline: 603-886-3518
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
