Thanks for replying
The tape is:
phoenix:/var/backups# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SONY Model: SDX-500C Rev: 010f
Type: Sequential-Access ANSI SCSI revision: 02
and the controller is:
phoenix:/var/backups# cat /proc/scsi/aic7xxx/0
Adaptec AIC7xxx driver version: 6.2.36
Adaptec 2940 Ultra SCSI adapter
aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
Allocated SCBs: 5, SG List Length: 102
I runned the btape test and it was successfull
What is strange is that I get this message for about one backup on ten
and not with the same tape ... (I thought first that it was a defect
tape ... but no)
thanks,
Julien
Phil Stracchino wrote:
Julien Cigar wrote:
Hello,
sometimes I have "write error" messages during my full backup (on tapes) :
12-Oct 18:44 phoenix-sd: BebifFullBackup.2005-10-12_06.00.00 Error:
block.c:552 Write error at 15:111 on device /dev/st0. ERR=Input/output
error.
12-Oct 18:44 phoenix-sd: BebifFullBackup.2005-10-12_06.00.00 Error:
Error writing final EOF to tape. This tape may not be readable.
dev.c:1213 ioctl MTWEOF error on /dev/st0. ERR=Input/output error.
any idea what could be the reason to this ? I'm quite sure the problem
is not the tapes ...
You don't mention what type of tape device. Did you run btape test?
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
