Hello,
On 2/21/2006 5:56 PM, Dan Langille wrote:
On 21 Feb 2006 at 8:51, Jason Martin wrote:
...
<several tape changes that work, then this:>
somehost-dir: Recycled volume "000024"
somehost-sd: 3301 Issuing autochanger "loaded drive 0" command.
somehost-sd: 3991 Bad autochanger "loaded drive 0" command: ERR=Child exited
with code 1.
somehost-sd: 3304 Issuing autochanger "load slot 2, drive 0" command.
somehost-sd: 3992 Bad autochanger "load slot 2, drive 0": ERR=Child exited with
code 1.
...
It sounds like you need to do some testing with your autochanger:
http://www.bacula.org/dev-manual/Autochanger_Support.html
Look for "Testing the Autochanger and Adapting Your mtx-changer
Script"
You might just need a "sleep 10" etc.
I admit I neither looked into the manual nor verified what the shipped
mtx-changer script does, so you better check these first.
Anyway, signal 1 is - in all cases I know - SIGHUP. This is usually
nothing fatal, so you might try to catch that signal in mtx-changer and
try to find why it is issued. Or, of course, simply ignore it...
Arno
--
IT-Service Lehmann [EMAIL PROTECTED]
Arno Lehmann http://www.its-lehmann.de
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
