Hi,
On 3/7/2006 9:54 AM, Thomas Sturm wrote:
Thank you Dan for your reply.
Now I have this:
bacula-dir.conf:
Storage {
Name = Autoloader
Address = backup.intra.melle.de
SDPort = 9103
Password = "secret"
Device = VS160
Media Type = DLT8000
Maximum Concurrent Jobs = 20
}
bacula-sd.conf:
Autochanger {
Name = "Autoloader"
Device = VS160
Changer Device = /dev/sg1
Changer Command = "/var/lib/bacula/mtx-changer %c %o %S %a %d"
}
Device {
Name = VS160
Media Type = DLT8000
Archive Device = /dev/st0 # Normal archive device
AutoChanger = yes
Drive Index = 0
AutomaticMount = yes; # when device opened, read it
RemovableMedia = yes;
AlwaysOpen = yes;
Maximum Spool Size = 30000M
Maximum Job Spool Size = 6000M
Spool Directory = /var/spool/bacula
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
but still the same result :-(
07-Mär 09:37 bacula-dir: Start Backup JobId 3335, Job=TS160.2006-03-07_09.37.05
*
You have messages.
*m
07-Mär 09:39 TS160: DIR and FD clocks differ by 171 seconds, FD automatically
adjusting.
07-Mär 09:37 bacula-sd: 3301 Issuing autochanger "loaded drive 0" command.
07-Mär 09:37 bacula-sd: 3302 Autochanger "loaded drive 0", result: nothing
loaded.
07-Mär 09:37 bacula-sd: 3301 Issuing autochanger "loaded drive 0" command.
07-Mär 09:37 bacula-sd: 3302 Autochanger "loaded drive 0", result: nothing
loaded.
07-Mär 09:37 bacula-sd: Please mount Volume "Mo_1-s8" on Storage Device "VS160"
(/dev/st0) for Job TS160.2006-03-07_09.37.05
As you can see, the sd is doing some Autochamger commands 'Issuing Autochanger "loaded drive 0" command".
The Autochanger worked perfectly with version 1.36.2. What I am now missing is something like
'Issuing autochanger "load slot 8 in drive 0" command'
It is possible that the catalog doesn't have any information about
volumes available in the autochanger. The easiest resolution in that
case is diong an 'update slots [scan] storage=Autoloader' in a Bacula
console.
Hope this helps,
Arno
Am Montag März 6 2006 15:52 schrieben Sie:
Reposted with amendments.
On 6 Mar 2006 at 15:29, Thomas Sturm wrote:
Hello,
I am using bacula 1.38.5 on Gentoo Linux.
My Problem ist, that the Autochanger don't "want" to load the needed
tape. Here is the output of bconsole:
06-Mär 14:51 bacula-dir: Start Backup JobId 3329,
Job=TS160.2006-03-06_14.51.55 06-Mär 14:51 bacula-sd: 3301 Issuing
autochanger "loaded drive 0" command. 06-Mär 14:51 bacula-sd: 3302
Autochanger "loaded drive 0", result: nothing loaded. 06-Mär 14:51
bacula-sd: 3301 Issuing autochanger "loaded drive 0" command. 06-Mär
14:51 bacula-sd: 3302 Autochanger "loaded drive 0", result: nothing
loaded. 06-Mär 14:51 bacula-sd: Please mount Volume "Mo_1-s8" on Storage
Device "Autoloade r" (/dev/st0) for Job TS160.2006-03-06_14.51.55
Why is 'Issuing autochanger "load drive 8 command"' missing?
Running Jobs:
JobId Level Name Status
======================================================================
3329 Full TS160.2006-03-06_14.51.55 is waiting for a mount request
When I now load the tape manually (with mtx-autochanger), the job
finisched without error.
Here are the parts of bacula-dir.conf and bacula-sd.conf:
bacula-dir.conf:
... snip ...
Storage {
Name = Autoloader
Autochanger = yes
I don't think the above directive is required here.
Address = backup.intra.melle.de
SDPort = 9103
Password = "secret"
Device = Autoloader
Media Type = DLT8000
Maximum Concurrent Jobs = 20
}
Here is what I have in bacula-dir.conf
Storage {
Name = TapeRobot1
Address = ngaio.example.org
SDPort = 9103
Password = "things"
Device = DLT
Media Type = DLT
}
... snip ...
bacula-sd.conf:
... snip ...
Device {
Name = Autoloader
Media Type = DLT8000
Archive Device = /dev/st0
Changer Device = /dev/sg1
Changer Command = "/var/lib/bacula/mtx-changer %c %o %S %a %d"
AutoChanger = yes
AutomaticMount = yes;
Autoselect = yes
RemovableMedia = yes;
AlwaysOpen = yes;
RandomAccess = no;
Maximum Spool Size = 30000M
Maximum Job Spool Size = 6000M
Spool Directory = /var/spool/bacula
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
You appear to have many directives which are not
You also need an autochanger resource. See below.
I think what you need is something like this:
This works for me (in bacula-sd.conf):
Device {
Name = DLT
Description = QUANTUM DLT7000 1624
Media Type = DLT
Archive Device = /dev/nsa1
Autochanger = YES
Drive Index = 0
Offline On Unmount = no
Hardware End of Medium = no
BSF at EOM = yes
Backward Space Record = yes
Fast Forward Space File = yes
TWO EOF = yes
}
Autochanger {
Name = TapeRobot
Device = DLT
Changer Device = /dev/ch0
Changer Command = "/home/dan/rc-chio-changer %c %o %S %a %d"
}
i.e. you don't have an autochanger resource. Instead, you have a
device named "Autochanger".
What is wrong with this configuration?
Also, make sure your autochange passes the tests:
http://www.bacula.org/dev-manual/Autochanger_Support.html
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=k&kid0944&bid$1720&dat1642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
IT-Service Lehmann [EMAIL PROTECTED]
Arno Lehmann http://www.its-lehmann.de
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
