thanks for your reply i have checked the thread and i am using 2.4.27-2-686-smp kernel and is there any other solution and in my syslog i am getting the following error messages
Mar 17 00:10:23 localhost kernel: scsi0:0:6:0: Device is active, asserting ATN
Mar 17 00:10:23 localhost kernel: Recovery code sleeping
Mar 17 00:10:28 localhost kernel: Recovery code awake
Mar 17 00:10:28 localhost kernel: Timer Expired
Mar 17 00:10:28 localhost kernel: aic7xxx_abort returns 0x2003
Mar 17 00:10:28 localhost kernel: scsi0:0:6:0: Attempting to queue a TARGET RESET message
Mar 17 00:10:28 localhost kernel: CDB: 0xa 0x0 0x0 0xfc 0x0 0x0
Mar 17 00:10:28 localhost kernel: aic7xxx_dev_reset returns 0x2003
Mar 17 00:10:28 localhost kernel: Recovery SCB completes
Mar 17 00:10:33 localhost kernel: scsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 6 lun 0
Mar 17 00:10:33 loc alhost kernel: st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1).
Mar 17 00:10:23 localhost kernel: Recovery code sleeping
Mar 17 00:10:28 localhost kernel: Recovery code awake
Mar 17 00:10:28 localhost kernel: Timer Expired
Mar 17 00:10:28 localhost kernel: aic7xxx_abort returns 0x2003
Mar 17 00:10:28 localhost kernel: scsi0:0:6:0: Attempting to queue a TARGET RESET message
Mar 17 00:10:28 localhost kernel: CDB: 0xa 0x0 0x0 0xfc 0x0 0x0
Mar 17 00:10:28 localhost kernel: aic7xxx_dev_reset returns 0x2003
Mar 17 00:10:28 localhost kernel: Recovery SCB completes
Mar 17 00:10:33 localhost kernel: scsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 6 lun 0
Mar 17 00:10:33 loc alhost kernel: st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1).
thanks
Wolfgang Denk <[EMAIL PROTECTED]> wrote:
In message <[EMAIL PROTECTED]> you wrote:
>
> I am getting the tape writing error when i schedule the job my tape drive is detecting and it is fine.
Is this on Linux?
> Error message as follows
>
> 16-Mar 00:10 cool-dir: Created new FileSet record "Full Set" 2006-03-16 00:10:03
> 16-Mar 00:10 cool-dir: Start Backup JobId 1, Job=NightlySave.2006-03-16_00.10.00
> 16-Mar 00:10 cool-sd: Wrote label to prelabeled Volume "Wednesday" on device "/dev/nst0"
> 16-Mar 00:10 cool-sd: NightlySave.2006-03-16_00.10.00 Error: block.c:552 Write error at 0:1706 on device /dev/nst0. ERR=Input/output error.
> 16- Mar 00:10 cool-sd: NightlySave.2006-03-16_00.10.00 Error: Error writing final EOF to tape. This tape may not be readable.
> dev.c:1213 ioctl MTWEOF error on /dev/nst0. ERR=No such device or address.
> 16-Mar 00:10 cool-sd: NightlySave.2006-03-16_00.10.00 Fatal error: Fatal device error: ERR=dev.c:639 ioctl MTIOCGET error on /dev/nst0. ERR=No such device or address.
> 16-Mar 00:10 cool-fd: NightlySave.2006-03-16_00.10.00 Fatal error: backup.c:477 Network send error 32768 to SD. ERR=Broken pipe
The symptoms look very much to what I've been expeiencing lately -
see my message "Strange SCSI problems" of March 13 on this list.
Check your system logs if you see any error messages there; look
especially for messages like these: "sense key Unit Attention",
"Additional sense: Power on, reset, or bus device reset occurred".
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
"I haven't lost my mind - it's backed up on tape somewhere."
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
Win a BlackBerry device from O2 with Yahoo!. Enter now.
