-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I'm assuming you know for a fact that the FD is actually running? I see
noplace that you've indicated that you've checked that it is.
Short of that, connection timed out sounds like it might be firewall
related... possible someone's been mucking about?
---- _ _ _ _ ___ _ _ _
|Y#| | | |\/| | \ |\ | | |Ryan Novosielski - User Support Spec. III
|$&| |__| | | |__/ | \| _| |[EMAIL PROTECTED] - 973/972.0922 (2-0922)
\__/ Univ. of Med. and Dent.|IST/AST - NJMS Medical Science Bldg - C630
Sean Proctor wrote:
> Hello,
>
> One of the File Daemons in my backup setup has stopped working. The file
> daemon is setup at a datacenter, and the director and storage daemon are
> both located on the same server at my company's office. Here's the error
> message I'm getting:
>
> 27-Mar 14:16 apollo-dir: WebServer.2006-03-27_12.05.20 Fatal error: Network
> error with FD during Backup: ERR=Connection timed out
> 27-Mar 14:17 apollo-dir: WebServer.2006-03-27_12.05.20 Fatal error: No Job
> status returned from FD.
> 27-Mar 14:17 apollo-dir: WebServer.2006-03-27_12.05.20 Error: Bacula
> 1.38.5(18Jan06): 27-Mar-2006 14:17:08
> JobId: 266
> Job: WebServer.2006-03-27_12.05.20
> Backup Level: Full
> Client: "thor-fd" i686-pc-linux-gnu,debian,3.1
> FileSet: "FullBackup" 2006-01-25 16:20:58
> Pool: "Default"
> Storage: "autochanger-ext"
> Scheduled time: 27-Mar-2006 12:05:13
> Start time: 27-Mar-2006 12:05:22
> End time: 27-Mar-2006 14:17:08
> Priority: 5
> FD Files Written: 0
> SD Files Written: 0
> FD Bytes Written: 0
> SD Bytes Written: 0
> Rate: 0.0 KB/s
> Software Compression: None
> Volume name(s): tape1
> Volume Session Id: 3
> Volume Session Time: 1143476473
> Last Volume Bytes: 14,465,995,903
> Non-fatal FD errors: 0
> SD Errors: 0
> FD termination status: Error
> SD termination status: Running
> Termination: *** Backup Error ***
>
> I'm not sure what to do from here. The configuration was fine before and it
> stopped working without my making any changes to it. I'm running
> Debian 3.1on both servers. Bacula
> 1.38.5 on both. Before today I was running 1.36.2 on the FD. I tried
> upgrading to see if it would help.
>
> Director config:
>
> #
> # Default Bacula Director Configuration file
> #
> # The only thing that MUST be changed is to add one or more
> # file or directory names in the Include directive of the
> # FileSet resource.
> #
> # For Bacula release 1.38.5 (18 January 2006) -- debian 3.1
> #
> # You might also want to change the default email address
> # from root to your address. See the "mail" and "operator"
> # directives in the Messages resource.
> #
>
> Director { # define myself
> Name = apollo-dir
> DIRport = 9101 # where we listen for UA connections
> QueryFile = "/usr/local/etc/query.sql"
> WorkingDirectory = "/usr/local/var/bacula/working"
> PidDirectory = "/var/run"
> Maximum Concurrent Jobs = 1
> Password = "q46rqcd9zjJHa7CjZWlJpsZRk+977vPxgOdiYhiUOxdv" #
> Console password
> Messages = Daemon
> }
>
> JobDefs {
> Name = "DefaultJob"
> Type = Backup
> Level = Incremental
> Client = apollo-fd
> FileSet = "Full Set"
> Schedule = "WeeklyCycle"
> Storage = autochanger-int
> Messages = Standard
> Pool = Default
> Priority = 6
> }
>
> JobDefs {
> Name = "ThorJob"
> Type = Backup
> Level = Incremental
> Client = thor-fd
> FileSet = "FullBackup"
> Schedule = "WeeklyCycle"
> Storage = autochanger-ext
> Messages = Standard
> Pool = Default
> Priority = 5
> }
>
> JobDefs {
> Name = "ApolloJob"
> Type = Backup
> Level = Incremental
> Client = apollo-fd
> FileSet = "FullBackup"
> Schedule = "WeeklyCycle"
> Storage = autochanger-int
> Messages = Standard
> Pool = Default
> Priority = 7
> }
>
> JobDefs {
> Name = "WinSvrJob"
> Type = Backup
> Level = Incremental
> Client = winsvr-fd
> FileSet = "FullWinBackup"
> Schedule = "WeeklyCycle"
> Storage = autochanger-int
> Messages = Standard
> Pool = Default
> Priority = 10
> }
>
>
> #
> # Define the main nightly save backup job
> # By default, this job will back up to disk in /tmp
> #Job {
> # Name = "Client1"
> # JobDefs = "DefaultJob"
> # Write Bootstrap = "/usr/local/var/bacula/working/Client1.bsr"
> #}
>
> #
> # Define the main nightly save backup job
> Job {
> Name = "WinSvrBackup"
> JobDefs = "WinSvrJob"
> Write Bootstrap = "/usr/local/var/bacula/working/winsvr.bsr"
> }
>
> #
> # Define the main nightly save backup job
> Job {
> Name = "WebServer"
> JobDefs = "ThorJob"
> Write Bootstrap = "/usr/local/var/bacula/working/webserver.bsr"
> }
>
> #
> # Define the main nightly save backup job
> Job {
> Name = "BackupServer"
> JobDefs = "ApolloJob"
> Write Bootstrap = "/usr/local/var/bacula/working/backupserver.bsr"
> }
>
> #Job {
> # Name = "Client2"
> # Client = apollo2-fd
> # JobDefs = "DefaultJob"
> # Write Bootstrap = "/usr/local/var/bacula/working/Client2.bsr"
> #}
>
> # Backup the catalog database (after the nightly save)
> Job {
> Name = "BackupCatalog"
> JobDefs = "DefaultJob"
> Level = Full
> FileSet="Catalog"
> Schedule = "WeeklyCycleAfterBackup"
> # This creates an ASCII copy of the catalog
> RunBeforeJob = "/usr/local/etc/make_catalog_backup bacula bacula bacula"
> # This deletes the copy of the catalog
> RunAfterJob = "/usr/local/etc/delete_catalog_backup"
> Write Bootstrap = "/usr/local/var/bacula/working/BackupCatalog.bsr"
> Priority = 11 # run after main backup
> }
>
> #
> # Standard Restore template, to be changed by Console program
> # Only one such job is needed for all Jobs/Clients/Storage ...
> #
> Job {
> Name = "RestoreFiles"
> Type = Restore
> Client=apollo-fd
> FileSet="Full Set"
> Storage = File
> Pool = Default
> Messages = Standard
> Where = /tmp/bacula-restores
> }
>
>
> #
> # Standard Restore template, to be changed by Console program
> # Only one such job is needed for all Jobs/Clients/Storage ...
> #
> Job {
> Name = "RestoreWebServer"
> Type = Restore
> Client=thor-fd
> FileSet="FullBackup"
> Storage = autochanger-ext
> Pool = Default
> Messages = Standard
> Where = /tmp/bacula-restores
> }
>
>
> #
> # Standard Restore template, to be changed by Console program
> # Only one such job is needed for all Jobs/Clients/Storage ...
> #
> Job {
> Name = "RestoreWinSvr"
> Type = Restore
> Client=winsvr-fd
> FileSet="FullWinBackup"
> Storage = autochanger-int
> Pool = Default
> Messages = Standard
> Where = /tmp/bacula-restores
> }
>
> # List of files to be backed up
> FileSet {
> Name = "FullBackup"
> Include {
> Options {
> signature = MD5
> }
> #
> # Put your list of files here, preceded by 'File =', one per line
> # or include an external list with:
> #
> # File = <file-name
> #
> # Note: / backs up everything on the root partition.
> # if you have other partitons such as /usr or /home
> # you will probably want to add them too.
> #
> # By default this is defined to point to the Bacula build
> # directory to give a reasonable FileSet to backup to
> # disk storage during initial testing.
> #
> File = /
> File = /home
> File = /usr
> File = /var
> }
>
> #
> # If you backup the root directory, the following two excluded
> # files can be useful
> #
> Exclude {
> File = /proc
> File = /tmp
> File = /.journal
> File = /.fsck
> File = /var/local/old-server
> }
> }
>
> # List of files to be backed up
> FileSet {
> Name = "FullWinBackup"
> Enable VSS = yes
> Include {
> Options {
> signature = MD5
> }
> #
> # Put your list of files here, preceded by 'File =', one per line
> # or include an external list with:
> #
> # File = <file-name
> #
> # Note: / backs up everything on the root partition.
> # if you have other partitons such as /usr or /home
> # you will probably want to add them too.
> #
> # By default this is defined to point to the Bacula build
> # directory to give a reasonable FileSet to backup to
> # disk storage during initial testing.
> #
> File = "c:\\"
> File = "d:\\"
> }
>
> #
> # If you backup the root directory, the following two excluded
> # files can be useful
> #
> Exclude {
> }
> }
>
> # List of files to be backed up
> FileSet {
> Name = "Full Set"
> Include {
> Options {
> signature = MD5
> }
> #
> # Put your list of files here, preceded by 'File =', one per line
> # or include an external list with:
> #
> # File = <file-name
> #
> # Note: / backs up everything on the root partition.
> # if you have other partitons such as /usr or /home
> # you will probably want to add them too.
> #
> # By default this is defined to point to the Bacula build
> # directory to give a reasonable FileSet to backup to
> # disk storage during initial testing.
> #
> File = /usr/src/bacula-1.38.5
> }
>
> #
> # If you backup the root directory, the following two excluded
> # files can be useful
> #
> Exclude {
> File = /proc
> File = /tmp
> File = /.journal
> File = /.fsck
> }
> }
>
> #
> # When to do the backups, full backup on first sunday of the month,
> # differential (i.e. incremental since full) every other sunday,
> # and incremental backups other days
> Schedule {
> Name = "WeeklyCycle"
> Run = Full 1st sun at 23:05
> Run = Differential 2nd-5th sun at 23:05
> Run = Incremental mon-sat at 23:05
> }
>
> # This schedule does the catalog. It starts after the WeeklyCycle
> Schedule {
> Name = "WeeklyCycleAfterBackup"
> Run = Full sun-sat at 23:10
> }
>
> # This is the backup of the catalog
> FileSet {
> Name = "Catalog"
> Include {
> Options {
> signature = MD5
> }
> File = /usr/local/var/bacula/working/bacula.sql
> }
> }
>
> # Client (File Services) to backup
> Client {
> Name = winsvr-fd
> Address = 192.168.86.5
> FDPort = 9102
> Catalog = MyCatalog
> Password = ... # password for FileDaemon
> File Retention = 30 days # 30 days
> Job Retention = 6 months # six months
> AutoPrune = yes # Prune expired Jobs/Files
> }
>
> # Client (File Services) to backup
> Client {
> Name = thor-fd
> Address = world-inet.com
> FDPort = 9102
> Catalog = MyCatalog
> Password = ... # password for FileDaemon
> File Retention = 30 days # 30 days
> Job Retention = 6 months # six months
> AutoPrune = yes # Prune expired Jobs/Files
> }
>
> # Client (File Services) to backup
> Client {
> Name = apollo-fd
> Address = 192.168.86.10
> FDPort = 9102
> Catalog = MyCatalog
> Password = ... # password for FileDaemon
> File Retention = 30 days # 30 days
> Job Retention = 6 months # six months
> AutoPrune = yes # Prune expired Jobs/Files
> }
>
> #
> # Second Client (File Services) to backup
> # You should change Name, Address, and Password before using
> #
> #Client {
> # Name = apollo2-fd
> # Address = apollo2
> # FDPort = 9102
> # Catalog = MyCatalog
> # Password = ... # password for FileDaemon 2
> # File Retention = 30 days # 30 days
> # Job Retention = 6 months # six months
> # AutoPrune = yes # Prune expired Jobs/Files
> #}
>
>
> # Definition of file storage device
> Storage {
> Name = File
> # Do not use "localhost" here
> Address = 192.168.86.10 # N.B. Use a fully qualified name
> here
> SDPort = 9103
> Password = ...
> Device = FileStorage
> Media Type = File
> }
>
>
>
> # Definition of AIT-3 autochanger tape storage device
> Storage {
> Name = autochanger-ext
> # Do not use "localhost" here
> Address = office.world-inet.com # N.B. Use a fully
> qualified name here
> SDPort = 9103
> Password = ... # password for Storage daemon
> Device = Autochanger # must be same as Device in
> Storage daemon
> Media Type = AIT-3 # must be same as MediaType in Storage
> daemon
> Autochanger = yes # enable for autochanger device
> }
>
> # Definition of AIT-3 autochanger tape storage device
> Storage {
> Name = autochanger-int
> # Do not use "localhost" here
> Address = 192.168.86.10 # N.B. Use a fully qualified name
> here
> SDPort = 9103
> Password = ... # password for Storage daemon
> Device = Autochanger # must be same as Device in
> Storage daemon
> Media Type = AIT-3 # must be same as MediaType in Storage
> daemon
> Autochanger = yes # enable for autochanger device
> }
>
> # Definition of 8mm tape storage device
> #Storage {
> # Name = "8mmDrive"
> # Do not use "localhost" here
> # Address = apollo # N.B. Use a fully qualified name here
> # SDPort = 9103
> # Password = ...
> # Device = "Exabyte 8mm"
> # MediaType = "8mm"
> #}
>
> # Definition of DVD storage device
> #Storage {
> # Name = "DVD"
> # Do not use "localhost" here
> # Address = apollo # N.B. Use a fully qualified name here
> # SDPort = 9103
> # Password = ...
> # Device = "DVD Writer"
> # MediaType = "DVD"
> #}
>
>
> # Generic catalog service
> Catalog {
> Name = MyCatalog
> dbname = bacula; user = bacula; password = "bacula"
> }
>
> # Reasonable message delivery -- send most everything to email address
> # and to the console
> Messages {
> Name = Standard
> #
> # NOTE! If you send to two email or more email addresses, you will need
> # to replace the %r in the from field (-f part) with a single valid
> # email address in both the mailcommand and the operatorcommand.
> #
> mailcommand = "/usr/local/sbin/bsmtp -h localhost -f \"\(Bacula\) %r\" -s
> \"Bacula: %t %e of %c %l\" %r"
> operatorcommand = "/usr/local/sbin/bsmtp -h localhost -f \"\(Bacula\) %r\"
> -s \"Bacula: Intervention needed for %j\" %r"
> mail = [EMAIL PROTECTED] = all, !skipped
> operator = [EMAIL PROTECTED] = mount
> console = all, !skipped, !saved
> #
> # WARNING! the following will create a file that you must cycle from
> # time to time as it will grow indefinitely. However, it will
> # also keep all your messages if they scroll off the console.
> #
> append = "/usr/local/var/bacula/working/log" = all, !skipped
> }
>
>
> #
> # Message delivery for daemon messages (no job).
> Messages {
> Name = Daemon
> mailcommand = "/usr/local/sbin/bsmtp -h localhost -f \"\(Bacula\) %r\" -s
> \"Bacula daemon message\" %r"
> mail = [EMAIL PROTECTED] = all, !skipped
> console = all, !skipped, !saved
> append = "/usr/local/var/bacula/working/log" = all, !skipped
> }
>
>
>
>
> # Default pool definition
> Pool {
> Name = Default
> Pool Type = Backup
> Recycle = yes # Bacula can automatically recycle
> Volumes
> AutoPrune = yes # Prune expired volumes
> Volume Retention = 365 days # one year
> Accept Any Volume = yes # write on any volume in the pool
> }
>
> #
> # Restricted console used by tray-monitor to get the status of the director
> #
> Console {
> Name = apollo-mon
> Password = ...
> CommandACL = status, .status
> }
>
>
> FD config:
>
> #
> # Default Bacula File Daemon Configuration file
> #
> # For Bacula release 1.36.2 (28 February 2005) -- debian 3.1
> #
> # There is not much to change here except perhaps the
> # File daemon Name to
> #
>
> #
> # List Directors who are permitted to contact this File daemon
> #
> Director {
> Name = apollo-dir
> Password = "piw4zIqWmm2c6wRZWtNy2ZxWj3EBjrbgk7HqchCUG4Ck"
> }
>
> #
> # Restricted Director, used by tray-monitor to get the
> # status of the file daemon
> #
> Director {
> Name = apollo-mon
> Password = "1gZYyoTBH36jcrNZixhV5C5uhps7GQ6jefl2E5mZrFAp"
> Monitor = yes
> }
>
> #
> # "Global" File daemon configuration specifications
> #
> FileDaemon { # this is me
> Name = thor-fd
> FDport = 9102 # where we listen for the director
> WorkingDirectory = /var/lib/bacula
> Pid Directory = /var/run
> Maximum Concurrent Jobs = 20
> }
>
> # Send all messages except skipped files back to Director
> Messages {
> Name = Standard
> director = apollo-dir = all, !skipped
> }
>
> Thanks,
> Sean Proctor
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (MingW32)
iD8DBQFEKFCnmb+gadEcsb4RAjzuAJ9oJ2C+l7ENY5uq3oNoa+GOQ+uZ/QCgppl8
cdM3NLDCT/53S3wdl2+tXZA=
=7KND
-----END PGP SIGNATURE-----
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
