On 5 Jun 2006 at 9:20, [EMAIL PROTECTED] wrote:
>
>
> --- Ryan Novosielski <[EMAIL PROTECTED]> wrote:
>
> > On Mon, 5 Jun 2006, Dan Langille wrote:
> >
> > > How can a device have a mounted volume yet be waiting for media?
> > >
> > > Any ideas?
> > >
> > > I see this in my SD status:
> > >
> > > Device status:
> > > Device "FileStorage" (/home/bacula/db) is not open or does not
> > > exist. Device "DLT" (/dev/nsa0) is mounted with
> > > Volume="DLT7000-JNY227" Pool="Default"
> > > Device is BLOCKED waiting for media.
> > > Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
> > > Positioned at File=0 Block=0
> > >
> > > Strange... DLT is mounted, but the device is blocked waiting for
> > > media. How can that be?
> >
> > Run a mount -- I suspect it is waiting for OTHER media than the tape
> > you have in there currently.
> >
> I have this happen a lot. At least for me sometimes it requires me to
> unmount my tape, reinsert it, wait till it stops loading and then
> issue a mount. Other times only issuing a mount will work.
Tried:
*unmount storage=DLT
Take the tape out of the DLT, and put it back in
*mount storage=DLT
Status output still contains this:
Device status:
Device "FileStorage" (/home/bacula/db) is not open or does not exist.
Device "DLT" (/dev/nsa0) is mounted with Volume="DLT7000-JNY227"
Pool="Default"
Device is BLOCKED waiting for media.
Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
Positioned at File=0 Block=0
I fear a restart of the SD is the only resort I have. But not yet...
I can wait for further suggestions.
thanks
--
Dan Langille : Software Developer looking for work
my resume: http://www.freebsddiary.org/dan_langille.php
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
