Hi, On 6/9/2006 2:46 PM, Thomas Sturm wrote: > Linux bacula 2.4.25_pre7-gss-r3 #8 Mo Mär 7 09:53:29 CET 2005 i686 Intel(R) > Pentium(R) 4 CPU 1.80GHz GenuineIntel GNU/Linux > 1000 OK: bacula-dir Version: 1.38.9 (02 May 2006) > > Hello list, > my problem is that the first "*update slots=8 scan storage=Autoloader" does > not work (the second always does!)
Hmm. According to the "scan" in the command, you use an autoloader without barcodes, so it's not an autoloader inventory issue. I suppose it might be a timing problem - I know this from my setup, where my old DDS autoloader needs some time for its inventory after a magazine was loaded. That takes a while, but once the autoloader has settled everything works normally. Arno > *update slots=8 scan storage=Autoloader > > 07-Jun 09:30 bacula-dir: RunBefore: Connecting to Director > backup.intra.melle.de:9101 > 07-Jun 09:30 bacula-dir: RunBefore: 1000 OK: bacula-dir Version: 1.38.9 (02 > May 2006) > 07-Jun 09:30 bacula-dir: RunBefore: Enter a period to cancel a command. > 07-Jun 09:30 bacula-dir: RunBefore: update slots=8 scan storage=Autoloader > 07-Jun 09:30 bacula-dir: RunBefore: Using default Catalog name=MyCatalog > DB=bacula > 07-Jun 09:30 bacula-dir: RunBefore: Connecting to Storage daemon Autoloader > at > backup.intra.melle.de:9103 ... > 07-Jun 09:30 bacula-dir: RunBefore: 3306 Issuing autochanger "slots" command. > 07-Jun 09:30 bacula-dir: RunBefore: Device "VS160" has 0 slots. > 07-Jun 09:30 bacula-dir: RunBefore: No slots in changer to scan. > > *update slots=8 scan storage=Autoloader > > 07-Jun 09:30 bacula-dir: RunBefore: update slots=8 scan storage=Autoloader > 07-Jun 09:30 bacula-dir: RunBefore: Connecting to Storage daemon Autoloader > at > backup.intra.melle.de:9103 ... > 07-Jun 09:30 bacula-dir: RunBefore: 3306 Issuing autochanger "slots" command. > 07-Jun 09:30 bacula-dir: RunBefore: Device "VS160" has 8 slots. > 07-Jun 09:30 bacula-dir: RunBefore: Connecting to Storage daemon Autoloader > at > backup.intra.melle.de:9103 ... > 07-Jun 09:30 bacula-dir: RunBefore: 3301 Issuing autochanger "loaded drive 0" > command. > 07-Jun 09:30 bacula-dir: RunBefore: 3302 Autochanger "loaded drive 0", > result: > nothing loaded. > 07-Jun 09:30 bacula-dir: RunBefore: 3306 Issuing autochanger "list" command. > 07-Jun 09:30 bacula-dir: RunBefore: Connecting to Storage daemon Autoloader > at > backup.intra.melle.de:9103 ... > 07-Jun 09:30 bacula-dir: RunBefore: 3301 Issuing autochanger "loaded drive 0" > command. > 07-Jun 09:30 bacula-dir: RunBefore: 3302 Autochanger "loaded drive 0", > result: > nothing loaded. > 07-Jun 09:30 bacula-dir: RunBefore: 3304 Issuing autochanger "load slot 8, > drive 0" command. > 07-Jun 09:31 bacula-dir: RunBefore: 3305 Autochanger "load slot 8, drive 0", > status is OK. > 07-Jun 09:31 bacula-dir: RunBefore: 3301 Issuing autochanger "loaded drive 0" > command. > 07-Jun 09:31 bacula-dir: RunBefore: 3302 Autochanger "loaded drive 0", result > is Slot 8. > 07-Jun 09:31 bacula-dir: RunBefore: 3001 Volume=Mi_1-s8 Slot=8 > 07-Jun 09:31 bacula-dir: RunBefore: Catalog record for Volume "Mi_1-s8" > updated to reference slot 8. > > Best regards > Thomas > > ------------------------------------------------------- > > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > > -- IT-Service Lehmann [EMAIL PROTECTED] Arno Lehmann http://www.its-lehmann.de _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
