Hello,
On Thursday 15 June 2006 16:01, Ryan Novosielski wrote:
> I have several HP systems here. The majority of them are in production
> and have not needed Bacula (HP's Data Protector obviously supports these
> machines ;)), but as this is my test box for most software packages, I
> have been attempting to build it -- as well as to give a place to let
> operators do things without consequences, for learning purposes.
>
> The machine I'm attempting to install it on could be used for testing by
> me or by you, if it was desireable. It is slow and old, but the software
> is current.
Thanks for the offer. Speed is not essential. I would like to see Bacula
working on as many OSes (such as HP) as possible.
Have you tried turning off HAVE_IPV6 in the src/config.h file as I suggested?
>
> Thanks for the help, I'll try removing that line.
> ---- _ _ _ _ ___ _ _ _
>
> |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - User Support Spec. III
> |$&| |__| | | |__/ | \| _| |[EMAIL PROTECTED] - 973/972.0922 (2-0922)
>
> \__/ Univ. of Med. and Dent.|IST/AST - NJMS Medical Science Bldg - C630
>
> Kern Sibbald wrote:
> > On Wednesday 14 June 2006 23:12, Kern Sibbald wrote:
> >> On Wednesday 14 June 2006 22:47, Ryan Novosielski wrote:
> >>> Hello all,
> >>>
> >>> I've been trying to compile 1.38.10 for my new test system. However,
> >>> this doesn't build on this arch. I tried originally with the HP-UX
> >>> AnsiC compilers and received some obvious incompatibility related
> >>> errors, but using gcc/g++, I got the following:
> >>>
> >>> gmake[1]: Entering directory `/opt/src/bacula-1.38.10/src/filed'
> >>> /usr/local/bin/g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1
> >>> filed.c
> >>>
> >>>
> >>> # In file included from ../lib/lib.h:58,
> >>> from ../bacula.h:125,
> >>> from filed.c:24:
> >>> ../lib/address_conf.h:43: error: field `dontuse6' has incomplete type
> >>> gmake[1]: *** [filed.o] Error 1
> >>> gmake[1]: Leaving directory `/opt/src/bacula-1.38.10/src/filed'
> >>>
> >>>
> >>> ====== Error in /opt/src/bacula-1.38.10/src/filed ======
> >>>
> >>> ...any recommendations? Thanks in advance for your help.
> >>
> >> It looks to me like a configuration problem. I'm not sure there is
> >> correct code to properly detect HP systems, so this is most likely
> >> something you need to add. There is a small section in the Developer's
> >> guide on porting to new systems.
> >>
> >> Concerning the specific error, it looks like you have IPv6 on your
> >> system but that not all the proper header files are pulled in (probably
> >> different names), or not all the standard structures are defined. You
> >> might try manually commenting out the HAVE_IPV6 tag in src/config.h.
> >> Note, config.h is re-created every time you run ./configure.
> >
> > By the way, I took a quick look at configure.in, and there is "skeleton"
> > code for HP that I added years ago, but since I don't have an HP system,
> > it probably has never been tested ...
--
Best regards,
Kern
(">
/\
V_V
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
