Hello, On 9/5/2006 10:44 AM, Jaime Ventura wrote: > Hello, > Im backing up data to tape using a tapeloader, and im experiencing > the following problem: > > 05-Sep 09:38 isep-dir: Start Backup JobId 498, > Job=jtgv-gsi.2006-09-05_09.38.17 > 05-Sep 09:38 localhost-sd: 3301 Issuing autochanger "loaded drive 0" > command. > 05-Sep 09:38 localhost-sd: 3302 Autochanger "loaded drive 0", result: > nothing loaded. > 05-Sep 09:38 localhost-sd: 3304 Issuing autochanger "load slot 1, drive > 0" command. > 05-Sep 09:38 localhost-sd: jtgv-gsi.2006-09-05_09.38.17 Fatal error: > 3992 Bad autochanger "load slot 1, drive 0": ERR=Child exited with code 1.
The changer script you use failed. Depending on the script you use and the kind of hardware you have, and the OS you run, and lots of other things probably, you could fix that. > 05-Sep 09:36 jtgv-fd: jtgv-gsi.2006-09-05_09.38.17 Fatal error: > job.c:1617 Bad response to Append Data command. Wanted 3000 OK data > , got 3903 Error append data > > > The "list volumes" say there is an appendable volume(000001L3): > > *list volumes > Pool: Default > +---------+------------+-----------+-------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > | MediaId | VolumeName | VolStatus | VolBytes | VolFiles | > VolRetention | Recycle | Slot | InChanger | MediaType | > LastWritten | > +---------+------------+-----------+-------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > | 8 | testeVol1 | Append | 171,591,154 | 0 | > 31,536,000 | 1 | 0 | 1 | File | 2006-09-04 23:10:04 | > +---------+------------+-----------+-------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > Pool: TapePoolForSERVERS > +---------+------------+-----------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > | MediaId | VolumeName | VolStatus | VolBytes | VolFiles | > VolRetention | Recycle | Slot | InChanger | MediaType | > LastWritten | > +---------+------------+-----------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > | 11 | 000001L3 | Append | 7,651,509,655 | 8 | > 31,536,000 | 1 | 1 | 1 | Ultrium-3 | 2006-08-15 07:30:00 | > | 12 | 000002L3 | Full | 434,014,408,572 | 437 | > 31,536,000 | 1 | 2 | 1 | Ultrium-3 | 2006-08-14 22:24:58 | > +---------+------------+-----------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > * > > > Is my data on the tape corrupted? Probably not. > At this point I cant really tell if the last job that used that tape > finished correctly. What does the 'status sd=xxx' command tell you? 'sta dir' might also help, the messages in the console should have some information, and of course, when the job finishes, there should be a job report. > How do I overcome the problem? Have you run btape on that device? Arno > Thank you very much. > -- IT-Service Lehmann [EMAIL PROTECTED] Arno Lehmann http://www.its-lehmann.de ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
