On Tuesday 12 September 2006 18:21, [EMAIL PROTECTED] wrote: > I'm running into a frequent situation where Bacula wants a given volume to be > in one drive of our autochanger, and it doesn't seem to find the volume when > it's already in the other drive. > > This is with Bacula 1.38.9, under Linux (FC1), with a 23-slot, 2 drive > autochanger and mysql5. > > Most backups work fine, but this is a persistent problem.
Two drive autochangers did not work correctly until Bacula version 1.38.11, and there have been no such problems posted against 1.38.11. > > > > Here's an example...there are two tapes (volumes 13 and 39) loaded and in use. > > Volume 39 is in the pool "Incremental", and is in drive 0. > Volume 13 is in the pool "Full", and is in drive 1. > > I manually begin a new backup (type "Full"). Bacula correctly wants to use > volume 13, however it insists on using that volume in drive 0 (which is in use > by other jobs). This results in a fatal error. > > ------------------------- bconsole session output ----------------------------------- > > Run Backup job > JobName: athens-full > FileSet: Full Set > Level: Full > Client: athens-fd > Storage: pv132t > Pool: Full > When: 2006-09-12 12:11:26 > Priority: 10 > OK to run? (yes/mod/no): yes > Job started. JobId=1050 > 12-Sep 12:11 parthenon-dir: Start Backup JobId 1050, Job=athens-full.2006-09-12_12.11.28 > 12-Sep 12:11 parthenon-sd: athens-full.2006-09-12_12.11.28 Fatal error: acquire.c:263 Wanted Volume "000013", but device "Drive-0" (/dev/tape0) is busy writing on "000039" . > 12-Sep 12:02 athens-fd: athens-full.2006-09-12_12.11.28 Fatal error: job.c:1617 Bad response to Append Data command. Wanted 3000 OK data > , got 3903 Error append data > > 12-Sep 12:11 parthenon-dir: athens-full.2006-09-12_12.11.28 Error: Bacula 1.38.9 (02May06): 12-Sep-2006 12:11:30 > JobId: 1050 > Job: athens-full.2006-09-12_12.11.28 > Backup Level: Full > Client: "athens-fd" mips-sgi-irix6.5,irix,6.5 > FileSet: "Full Set" 2006-07-27 14:15:10 > Pool: "Full" > Storage: "pv132t" > Scheduled time: 12-Sep-2006 12:11:26 > Start time: 12-Sep-2006 12:11:30 > End time: 12-Sep-2006 12:11:30 > Elapsed time: 0 secs > Priority: 10 > FD Files Written: 0 > SD Files Written: 0 > FD Bytes Written: 0 (0 B) > SD Bytes Written: 0 (0 B) > Rate: 0.0 KB/s > Software Compression: None > Volume name(s): > Volume Session Id: 53 > Volume Session Time: 1157752704 > Last Volume Bytes: 292,937,748,142 (292.9 GB) > Non-fatal FD errors: 0 > SD Errors: 0 > FD termination status: Error > SD termination status: Error > Termination: *** Backup Error *** > > > stat stor > Automatically selected Storage: pv132t > Connecting to Storage daemon pv132t at parthenon:9103 > > parthenon-sd Version: 1.38.9 (02 May 2006) i686-pc-linux-gnu redhat (Yarrow) > Daemon started 08-Sep-06 17:58, 51 Jobs run since started. > > Running Jobs: > Writing: Full Backup job braid2-full JobId=1039 Volume="000013" > pool="Full" device=""Drive-1" (/dev/tape1)" > Files=3,077,247 Bytes=216,468,267,436 Bytes/sec=4,547,939 > FDReadSeqNo=30,080,818 in_msg=21084980 out_msg=5 fd=14 > Writing: Full Backup job athena1-inc JobId=1045 Volume="000039" > pool="Incremental" device=""Drive-0" (/dev/tape0)" > Files=798,055 Bytes=170,634,464,916 Bytes/sec=3,662,705 > FDReadSeqNo=9,287,136 in_msg=7011280 out_msg=5 fd=28 > ==== > --------------------------------------------------------------------------------- > > > I can supply copies of my config files if needed. Please let me know if you've got any suggestions. Upgrade to 1.38.11, and if the problems still persist then it might be a good idea to look at it more closely (i.e. your conf files, ...) > > Thanks, > > Mark > > ---- > Mark Bergman [EMAIL PROTECTED] > System Administrator > Section of Biomedical Image Analysis 215-662-7310 > Department of Radiology, University of Pennsylvania > > http://pgpkeys.pca.dfn.de:11371/pks/lookup?search=mark.bergman%40.uphs.upenn.edu > > > > The information contained in this e-mail message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail, and delete the original message. > > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
