>>>>> On Fri, 13 Oct 2006 19:51:31 +0200, Emmanuel Lesouef said: > > I have these lines in my dmesg : > > SCSI subsystem initialized > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 > PCI: setting IRQ 11 as level-triggered > ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 11 (level, > low) -> IRQ > 11 > scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 > <Adaptec 29160N Ultra160 SCSI adapter> > aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs > > Vendor: qUaNtUm Model: dLt vS160 Rev: 2200 > Type: Sequential-Access ANSI SCSI revision: 02 > target0:0:5: Beginning Domain Validation > target0:0:5: wide asynchronous > (scsi0:A:5:0): parity error detected in Data-in phase. SEQADDR(0x6b) > SCSIRATE(0x > 80) > (scsi0:A:5:0): parity error detected in Data-in phase. SEQADDR(0x54) > SCSIRATE(0x > 80) > (scsi0:A:5:0): parity error detected in Data-in phase. SEQADDR(0x6b) > SCSIRATE(0x > 80) > (scsi0:A:5:0): parity error detected in Data-in phase. SEQADDR(0x54) > SCSIRATE(0x > 80) > target0:0:5: Wide Transfers Fail > target0:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 96) > target0:0:5: Domain Validation skipping write tests > target0:0:5: Ending Domain Validation > st: Version 20050830, fixed bufsize 32768, s/g segs 256 > > > Is there someone that can help me with this ?
I suggest checking that you have the correct SCSI cable and termination. __Martin ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
