Look carefully for missing quotes at the end of the Write Bootstrap lines! __Martin
>>>>> On Thu, 16 Nov 2006 14:39:36 -0000, Luke Taylor said: > > OK I have run the command you gave me (stopped bacula first) and get the > following output: > [EMAIL PROTECTED] bin]# ./bacula-dir -f -d100 > bacula-dir: dird.c:129 Debug level = 100 > bacula-dir: inc_conf.c:487 set wildfile 0x81c4850 size=1 *.obj > bacula-dir: inc_conf.c:487 set wildfile 0x81c4850 size=2 *.exe > bacula-dir: mysql.c:75 db_open first time > bacula-dir: mysql.c:135 mysql_init done > bacula-dir: mysql.c:156 mysql_real_connect done > bacula-dir: mysql.c:158 db_user=bacula db_name=bacula db_password= > unixutil-dir: jcr.c:116 read_last_jobs seek to 188 > unixutil-dir: jcr.c:123 Read num_items=10 > unixutil-dir: bnet_server.c:83 Addresses host[ipv4:0.0.0.0:9101] > > It then just hangs at this point (I have left it for about 10 mins to make > sure) and won't start Bacula.....I have also tried doing this with bacula-sd > & bacula-fd still running and get the same result. Not really sure if this > makes things any clearer to be honest....I am a bit lost :( > > Thanks > Luke > > -----Original Message----- > From: Bill Moran [mailto:[EMAIL PROTECTED] > Sent: 16 November 2006 14:13 > To: [EMAIL PROTECTED] > Cc: bacula-users@lists.sourceforge.net > Subject: Re: [Bacula-users] Job not appearing in console > > In response to "Luke Taylor" <[EMAIL PROTECTED]>: > > > I tried with ./bacula start -f -100 but don't get anything, I am > > having a look around to find out how to do it. > > > > I will update further if/when I manage to find instructions. > > bacula-dir -f -d100 > (You may have to give -c if it doesn't find the config file) > > If you do bacula-dir --help, it'll give you a list of options. Not because > it understands --help, but because it does that when it doesn't understand > its options. > > > -----Original Message----- > > From: Bill Moran [mailto:[EMAIL PROTECTED] > > Sent: 16 November 2006 13:58 > > To: [EMAIL PROTECTED] > > Cc: bacula-users@lists.sourceforge.net > > Subject: Re: [Bacula-users] Job not appearing in console > > > > In response to "Luke Taylor" <[EMAIL PROTECTED]>: > > > > > Hi I have made the amendments but still no joy... The file now > > > contains the following for the two clients not showing up. > > > > Have you tried starting the director in the foreground with debugging? > > > > > > > > JobDefs { > > > Name = "Autonet" > > > Type = Backup > > > Level = Full > > > Client = jspautonet-fd > > > FileSet = "WebserverSet" > > > Schedule = "jspautonet-fd" > > > Storage = File > > > Messages = Standard > > > Pool = autonetpool > > > Priority = 10 > > > } > > > > > > Job { > > > Name = "AutonetServer" > > > JobDefs = "Autonet" > > > Type = Backup > > > Level = Full > > > Client = jspautonet-fd > > > FileSet = "WebserverSet" > > > Schedule = "jspautonet-fd" > > > Write Bootstrap = "/usr/local/bacula/bin/working/jspautonet.bsr > > > } > > > > > > FileSet { > > > Name = "WebserverSet" > > > Include { > > > Options { > > > } > > > File = /usr/local/apache/conf/ > > > File = /usr/local/apache/conf/ssl/ > > > File = /usr/local/tomcat/webapps/ > > > File = /usr/local/tomcat/conf/Catalina/localhost/ > > > File = /usr/local/etc/tomcat/ > > > } > > > } > > > > > > Schedule { > > > Name = "jspautonet-fd" > > > Run = Level=Incremental Pool=autonetpool Monday at 20:30 > > > Run = Level=Incremental Pool=autonetpool Tuesday at 20:30 > > > Run = Level=Incremental Pool=autonetpool Wednesday at 20:30 > > > Run = Level=Incremental Pool=autonetpool Thursday at 20:30 > > > Run = Level=Incremental Pool=autonetpool Friday at 20:30 } > > > > > > Client { > > > Name = jspautonet-fd > > > Address = 10.210.17.177 > > > FDPort = 9102 > > > Catalog = MyCatalog > > > Password = "" > > > > > > File Retention = 30 days > > > Job Retention = 6 months > > > AutoPrune = yes > > > } > > > > > > Pool { > > > Name = autonetpool > > > Pool Type = Backup > > > Recycle = yes > > > AutoPrune = yes > > > Volume Retention = 365 days > > > Accept Any volume = yes > > > } > > > > > > And > > > > > > JobDefs { > > > Name = "MXdev" > > > Type = Backup > > > Level = Full > > > Client = mxdev-fd > > > FileSet = "Mxdev Set" > > > Schedule = "mxdev-fd" > > > Storage = File > > > Messages = Standard > > > Pool = mxdevpool > > > Priority = 10 > > > } > > > > > > Job { > > > Name = "Backupmxdev" > > > JobDefs = "MXdev" > > > Type = Backup > > > Level = Full > > > Client = mxdev-fd > > > FileSet = "Mxdev Set" # Luke desktop > > > Schedule = "mxdev-fd" > > > Write Bootstrap = "/usr/local/bacula/bin/working/mxdev.bsr" > > > } > > > > > > FileSet { > > > Name = "Mxdev Set" > > > Include { > > > Options { > > > } > > > File = /usr/local/luke > > > } > > > } > > > > > > Schedule { > > > Name = "mxdev-fd" > > > Run = Level=Incremental Pool=mxdevpool Monday at 20:15 > > > Run = Level=Incremental Pool=mxdevpool Tuesday at 20:15 > > > Run = Level=Incremental Pool=mxdevpool Wednesday at 20:15 > > > Run = Level=Incremental Pool=mxdevpool Thursday at 20:15 > > > Run = Level=Incremental Pool=mxdevpool Friday at 20:15 } > > > > > > Client { > > > Name = mxdev-fd > > > Address = 10.26.13.112 > > > FDPort = 9102 > > > Catalog = MyCatalog > > > Password = "" > > > File Retention = 30 days # 30 days > > > Job Retention = 6 months # six months > > > AutoPrune = yes # Prune expired Jobs/Files > > > } > > > > > > > > > Pool { > > > Name = mxdevpool > > > Pool Type = Backup > > > Recycle = yes > > > AutoPrune = yes > > > Volume Retention = 365 days > > > Accept Any Volume = yes > > > } > > > > > > All that appears in the bconcole is: > > > > > > *run > > > Using default Catalog name=MyCatalog DB=bacula A job name must be > > > specified. > > > The defined Job resources are: > > > 1: Client1 > > > 2: Twiki Server > > > 3: Backupwindows > > > 4: BackupCatalog > > > 5: RestoreFiles > > > Select Job resource (1-5): > > > > > > HOWEVER, if I remove the "Twiki Server" job frrom the director > > > configuration file the Autonet job appears (there is still no sign > > > of the mxdev job) and completes with no errors. If I remover the > > > Autonet and Twiki jobs the mxdev job appears on the list.....it > > > looks to me like there is a setting somewhere on the system that > > > defines how many jobs can be displayed on that list but I can't find > anything anywhere. > > > > > > Any further assistance would be much appreciated. > > > > > > Regards > > > Luke > > > > > > -----Original Message----- > > > From: Bill Moran [mailto:[EMAIL PROTECTED] > > > Sent: 15 November 2006 14:38 > > > To: [EMAIL PROTECTED] > > > Cc: bacula-users@lists.sourceforge.net > > > Subject: Re: [Bacula-users] Job not appearing in console > > > > > > In response to "Luke Taylor" <[EMAIL PROTECTED]>: > > > > > > > > Thanks for replying, FYI the jobs don't have the same name but > > > > below is the directors configuration file excluding passwords. > > > > > > > > FYI I have since addded another job resource which also doesn't > > > > appear on the list.....the jobs in question are hignlighted in > > > > bold....but just incase it doesn't get displayed I have put the > > > > job resource just > > > below. > > > > > > Please don't rely on HTML to communicate for you. The bold doesn't > > > display on my MUA, and I had to do a good bit of fscking around to > > > figure out which jobs you were having trouble with. Do I have the > > > correct > > two? > > > > > > > Job { > > > > Name = "Twiki Server" > > > > JobDefs = "Twiki" > > > > Type = Backup > > > > Level = Full > > > > Client = twiki-fd > > > > FileSet = "Twiki Set" > > > > Schedule = "twiki-fd" > > > > Write Bootstrap = "/usr/local/bacula/bin/working/twiki.bsr > > > > } > > > > > > > > Job { > > > > Name = "Autonet Server" > > > > JobDefs = "Autonet" > > > > Type = Backup > > > > Level = Full > > > > Client = jspautonet-fd > > > > FileSet = "Webserver Set" > > > > Schedule = "jspautonet-fd" > > > > Write Bootstrap = "/usr/local/bacula/bin/working/jspautonet.bsr > > > > } > > > > > > I looked at this yesterday and couldn't find anything wrong, then > > > looked at it again this morning and still can see anything obviously > > wrong. > > > > > > So I'm guessing. I don't believe that spaces in job names would > > > cause any problems, but it's the only thing I can see that stands out. > > > Trying removing the spaces from your various names (JobDefs, Job, > > > FileSet) and see if the problem persists. Hope this isn't a wild > > > goose chase for you, but I don't have any other ideas. > > > > > > Another good idea would be to start the director in the foreground > > > with debugging turned on and see if it reports anything helpful. > > > See the docs for the details on how to do this. > > > > > > -- > > > Bill Moran > > > Collaborative Fusion Inc. > > > > > > > > > > > > IMPORTANT: This message contains confidential information and is > > > intended only for the individual named. If the reader of this > > > message is not an intended recipient (or the individual responsible > > > for the delivery of this message to an intended recipient), please > > > be advised that any re-use, dissemination, distribution or copying > > > of this message is > > prohibited. > > > Please notify the sender immediately by e-mail if you have received > > > this e-mail by mistake and delete this e-mail from your system. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > Bill Moran > > Collaborative Fusion Inc. > > > > [EMAIL PROTECTED] > > Phone: 412-422-3463x4023 > > > > **************************************************************** > > IMPORTANT: This message contains confidential information and is > > intended only for the individual named. If the reader of this message > > is not an intended recipient (or the individual responsible for the > > delivery of this message to an intended recipient), please be advised > > that any re-use, dissemination, distribution or copying of this > > message is prohibited. Please notify the sender immediately by e-mail > > if you have received this e-mail by mistake and delete this e-mail from > your system. > > E-mail transmission cannot be guaranteed to be secure or error-free as > > information could be intercepted, corrupted, lost, destroyed, arrive > > late or incomplete, or contain viruses. The sender therefore does not > > accept liability for any errors or omissions in the contents of this > > message, which arise as a result of e-mail transmission. > > **************************************************************** > > > > > > > > IMPORTANT: This message contains confidential information and is > > intended only for the individual named. If the reader of this message > > is not an intended recipient (or the individual responsible for the > > delivery of this message to an intended recipient), please be advised > > that any re-use, dissemination, distribution or copying of this message is > prohibited. > > Please notify the sender immediately by e-mail if you have received > > this e-mail by mistake and delete this e-mail from your system. > > > > > > > > > > > > > > > > > > > > > > > -- > Bill Moran > Collaborative Fusion Inc. > > [EMAIL PROTECTED] > Phone: 412-422-3463x4023 > > **************************************************************** > IMPORTANT: This message contains confidential information and is intended > only for the individual named. If the reader of this message is not an > intended recipient (or the individual responsible for the delivery of this > message to an intended recipient), please be advised that any re-use, > dissemination, distribution or copying of this message is prohibited. Please > notify the sender immediately by e-mail if you have received this e-mail by > mistake and delete this e-mail from your system. > E-mail transmission cannot be guaranteed to be secure or error-free as > information could be intercepted, corrupted, lost, destroyed, arrive late or > incomplete, or contain viruses. The sender therefore does not accept > liability for any errors or omissions in the contents of this message, which > arise as a result of e-mail transmission. > **************************************************************** > > > > IMPORTANT: This message contains confidential information and is intended > only for the individual named. If the reader of this message is not an > intended recipient (or the individual responsible for the delivery of this > message to an intended recipient), please be advised that any re-use, > dissemination, distribution or copying of this message is prohibited. > Please notify the sender immediately by e-mail if you have received this > e-mail by mistake and delete this e-mail from your system. > > > > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
