Hi,
I'm not familiar with this particular autochanger but does it really
have 12 DRIVES or does it have 12 tape SLOTS?
If it's the later, your config is wrong as you only need to configure a
device per tape drive, not slot AFAIK.
Also, I dont think you should be specifying 'AutoChanger = Yes' in your
Device definition. You're defining a tape drive there, not the
autochanger (which is defined in the AutoChanger definition above it)
Hope this helps in some way,
Cheers,
Troy Daniels
Systems Administrator
iTouch Australia (pty) ltd.
christian zimmermann wrote:
> Hi folks,
>
> I need some help with my autochanger config.
> I have an overland arcvault 12 autochanger, I can mount all tapes with the
> mtx
> command no problem.
> But when I try to mount a tape with bconsole so I can label it I allways get
> an error like this.
>
> mount
> The defined Storage resources are:
> 1: File
> 2: Overland
> Select Storage resource (1-2): 2
> Enter autochanger drive[0]: 0
> 3301 Issuing autochanger "loaded drive 0" command.
> 3302 Autochanger "loaded drive 0", result: nothing loaded.
> 3301 Issuing autochanger "loaded drive 0" command.
> 3302 Autochanger "loaded drive 0", result: nothing loaded.
> 3301 Issuing autochanger "loaded drive 0" command.
> 3302 Autochanger "loaded drive 0", result: nothing loaded.
> 3902 Cannot mount Volume on Storage Device "Drive-1" (/dev/st0) because:
> Couldn't rewind device "Drive-1" (/dev/st0): ERR=dev.c:678 Rewind error on
> "Drive-1" (/dev/st0). ERR=No medium found.
>
> 3905 Device "Drive-1" (/dev/st0) open but no Bacula volume is mounted.
> If this is not a blank tape, try unmounting and remounting the Volume.
>
>
> I can mount the tape with mtx and label it without a problem I can even
> umount
> the tape with the bconsole. But I´m not able to mount it.
>
> Can someone point me in the right direction?
> I think I have a config error but not sure.
>
>
> This is my bacula-sd.conf
> ---------------------------------------
>
> Autochanger {
> Name = Overland
> Device = Drive-1, Drive-2, Drive-3, Drive-4, Drive-5, Drive-6, Drive-7,
> Drive-8, Drive-9, Drive-10, Drive-11, Drive-12
> Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/sg1
> }
>
> Device {
> Name = Drive-1 #
> Drive Index = 0
> Media Type = LTO-2
> Archive Device = /dev/st0
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes
> # Enable the Alert command only if you have the mtx package loaded
> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> }
>
> Device {
> Name = Drive-2
> .
> .
> }
>
>
> The bacula-dir.conf
> -------------------------------
>
> Storage {
> Name = Overland
> Address = 10.2.0.43
> SDPort = 9103
> Password = "test"
> Device = Drive-1
> Device = Drive-2
> Device = Drive-3
> Device = Drive-4
> Device = Drive-5
> Device = Drive-6
> Device = Drive-7
> Device = Drive-8
> Device = Drive-9
> Device = Drive-10
> Device = Drive-11
> Device = Drive-12
> Media Type = LTO-2
> Autochanger = yes
> }
>
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
