Some more data points on this issue
On Jan 1, 2007, at 10:45 PM, Charles Galpin wrote:
> Hi again
>
> I keep getting a network error when trying to do a full backup of my
> mac. This is over wireless, but I don't get any network errors doing
> anything else.
Well, I tried backing up a Windows XP laptop (bacula 1.38.10) over
both wireless and wired (100Mbs) and it fails too. So I guess I need
to test the server's network connection, but I'm not showing any
interface errors and haven't seen any networking problems with it
before.
[EMAIL PROTECTED] tmp]# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:18:F3:6B:9C:89
inet addr:192.168.2.132 Bcast:192.168.2.255 Mask:
255.255.255.0
inet6 addr: fe80::218:f3ff:fe6b:9c89/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1304744 errors:0 dropped:0 overruns:0 frame:0
TX packets:681978 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1852970486 (1.7 GiB) TX bytes:50165462 (47.8 MiB)
[EMAIL PROTECTED] tmp]# lspci -v -s 00:08.0
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device 8239
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
I/O ports at b000 [size=8]
Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Memory at fe028000 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
Capabilities: [50] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Capabilities: [6c] HyperTransport: MSI Mapping
The windows error when wireless is
01-Jan 22:54 dell-fd: dell.2007-01-01_22.55.22 Fatal error: c:\cygwin
\home\kern\bacula\k\src\win32\filed\../../filed/backup.c:500 Network
send error to SD. ERR=Input/output error
01-Jan 22:54 dell-fd: dell.2007-01-01_22.55.22 Error: c:\cygwin\home
\kern\bacula\k\src\win32\lib\../../lib/bnet.c:393 Write error sending
len to Storage daemon:xen:9103: ERR=Input/output error
And wired direct to the same hub as the server:
*
02-Jan 00:04 dell-fd: dell.2007-01-02_00.06.21 Fatal error: c:\cygwin
\home\kern\bacula\k\src\win32\filed\../../filed/backup.c:500 Network
send error to SD. ERR=Input/output error
02-Jan 00:07 xen-dir: dell.2007-01-02_00.06.21 Error: Bacula 1.38.11
(28Jun06): 02-Jan-2007 00:07:15
JobId: 22
Job: dell.2007-01-02_00.06.21
Backup Level: Full (upgraded from Incremental)
Client: "dell-fd" Windows XP,MVS,NT 5.1.2600
FileSet: "Windows Full Set" 2007-01-01 23:54:44
Pool: "Default"
Storage: "DellFile"
Scheduled time: 02-Jan-2007 00:06:20
Start time: 02-Jan-2007 00:06:29
End time: 02-Jan-2007 00:07:15
Elapsed time: 46 secs
Priority: 10
FD Files Written: 3
SD Files Written: 0
FD Bytes Written: 66,493 (66.49 KB)
SD Bytes Written: 0 (0 B)
Rate: 1.4 KB/s
Software Compression: 49.6 %
Volume name(s):
Volume Session Id: 2
Volume Session Time: 1167713659
Last Volume Bytes: 1 (1 B)
Non-fatal FD errors: 0
SD Errors: 0
FD termination status: Error
SD termination status: Error
Termination: *** Backup Error ***
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
