Hi Bacula users,
sorry if you get this message two times, I sent it with a wrong sender (not in the list), so I am sending it again.
I am facing a problem that came out with rev. 1.38.11 (I never saw it with 1.36.3). The problem did not happen all times, but very often. Now I switched to 2.0.2 and this problem is much more frequent.
The problem is that when a tape was exhausted bacula changes correctly the tape in the autochanger drive but just after get this error:
25-feb 02:47 bacula-sd: End of Volume "web-004" at 594:3362 on device "LTO1" (/dev/lto1). Write of 64512 bytes got -1.
25-feb 02:47 bacula-sd: Re-read of last block succeeded.
25-feb 02:47 bacula-sd: End of medium on Volume "web-004" Bytes=594,178,937,856 Blocks=9,210,362 at 25-feb-2007 02:47.
25-feb 02:47 bacula-sd: 3301 Issuing autochanger "loaded? drive 0" command.
25-feb 02:47 bacula-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
25-feb 02:47 bacula-sd: 3307 Issuing autochanger "unload slot 3, drive 0" command.
25-feb 02:48 bacula-sd: 3304 Issuing autochanger "load slot 4, drive 0" command.
25-feb 02:48 bacula-sd: 3305 Autochanger "load slot 4, drive 0", status is OK.
25-feb 02:48 bacula-sd: 3301 Issuing autochanger "loaded? drive 0" command.
25-feb 02:48 bacula-sd: 3302 Autochanger "loaded? drive 0", result is Slot 4.
25-feb 02:49 bacula-sd: Wrote label to prelabeled Volume "web-005" on device "LTO1" (/dev/lto1)
25-feb 02:49 bacula-sd: New volume "web-005" mounted on device "LTO1" (/dev/lto1) at 25-feb-2007 02:49.
25-feb 02:49 bacula-sd: End of Volume "web-005" at 0:1 on device "LTO1" (/dev/lto1). Write of 64512 bytes got -1.
25-feb 02:49 bacula-sd: webfs3-job.2007-02-24_20.03.22 Error: Re-read of last block OK, but block numbers differ. Last block=0 Current block=9210362.
25-feb 02:49 bacula-sd: Job write elapsed time = 06:43:26, Transfer rate = 24.52 M bytes/second
25-feb 02:49 webfs3: webfs3-job.2007-02-24_20.03.22 Fatal error: backup.c:860 Network send error to SD. ERR=Pipe rotta
25-feb 02:49 bacula-dir: webfs3-job.2007-02-24_20.03.22 Error: Bacula 2.0.2 (28Jan07): 25-feb-2007 02:49:25
It seems there are two problems, the first one (and the most important one) is that bacula get an end of volume on the new tape, and the second one is the difference in the last block (it appears to be the last block of the previous tape).
Bacula is a MySQL version on a RedHat AS 4.04, rpmbuilt on that system, an HP proliant G3 3.2 Ghz, 2Gb RAM.
The tape is an MSL6000 with two LTO-3 drives, drived by bacula directly (not using the autochanger as device - 1.36.3 setup).
Btape tests run correctly, including the "fill and change tape" (I am attaching the test result, if someone is interested).
Did anyone get a similar problem?
--------------------------------------------------------------------------
Ferdinando Pasqualetti
G.T.Dati srl
Tel. 0557310862 - 3356172731 - Fax 055720143
btape.log
Description: Binary data
------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
