Hi Arno, thanks for your comments. Please find my answers inline.
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Arno Lehmann > Sent: Monday, February 26, 2007 8:44 PM > To: 'bacula-users' > Subject: Re: [Bacula-users] Mounting/Label question > > Device config: > > > > Device { > > Name = Quantum > > Changer Device = tape0 > > Media Type = DLT-V4 > > Device Type = Tape > > Archive Device = Tape0 > > AutomaticMount = yes > > AlwaysOpen = yes > > RemovableMedia = yes > > RandomAccess = no > > AutoChanger = no > > Alert Command = "tapeinfo -f %c | findstr TapeAlert" > > Spool Directory = "V:\\BaculaSpool" > > Maximum Spool Size = 2 GB > > Changer Command = "mtx-changer %o %a %S" > > Maximum Changer Wait = 4d > > Offline On Unmount = yes > > Label media = yes > > } > > That configuration looks funny... is that an autochanger or a single > drive? The configuration looks like a 1.36 one - i.e. no separate > autochanger section - but that was not ported to windows. I don't have an autochanger. The last four lines were added recently to achive that a tape is automatically ejected, that a new inserted tape is mounted automatically and that a new tape is also automatically labeled. The idea behind was, that a normal user could change the tape himself and that no admin is needed to mount the tape etc.. These lines were actually taken from this list some days ago(Erich Prinz - "Win32 mtx-changer.cmd and single drive"). > > Data spooling: 0 active jobs, 0 bytes; 7 total jobs, 2,000,050,371 max > > bytes/job. > > Attr spooling: 1 active jobs, 9,135,494 bytes; 6 total jobs, 17,783,343 max > > bytes. > > But there are attributes still spooled... looks like the SD > is currently despooling attributes after a completed job. > > Is that possible, i.e. did the Job finish some time after you > wrote your mail? I looked in the log and the Full Backup showed a "Termination: *** Backup Error ***". See below for the whole log entry of that job. > If it did not, I'd like to see the 'sta dir' output, because above you > state that "the director is still waiting for a tape" but didn't give > any output showing us how it did wait :-) Arno you're right, that was a mistake on my side. The yesterday evening backup was normally executed. Do you have a clue why the director couldn't get the record for JobId 97? Thanks Andreas Log entry for job: 25-Feb 23:05 srv-dir: Start Backup JobId 97, Job=PTHHSrv.2007-02-25_23.05.00 25-Feb 23:05 srv-dir: Max configured use duration exceeded. Marking Volume "Tape04" as Used. 25-Feb 23:06 srv-sd: Please mount Volume "FirstTape" on Storage Device "Quantum" (Tape0) for Job Srv.2007-02-25_23.05.00 26-Feb 00:06 srv-sd: Please mount Volume "FirstTape" on Storage Device "Quantum" (Tape0) for Job Srv.2007-02-25_23.05.00 26-Feb 02:06 srv-sd: Please mount Volume "FirstTape" on Storage Device "Quantum" (Tape0) for Job Srv.2007-02-25_23.05.00 26-Feb 06:06 srv-sd: Please mount Volume "FirstTape" on Storage Device "Quantum" (Tape0) for Job Srv.2007-02-25_23.05.00 26-Feb 09:37 srv-sd: Wrote label to prelabeled Volume "Tape05" on device "Quantum" (Tape0) 26-Feb 09:37 srv-sd: Spooling data ... 26-Feb 09:37 srv-fd: Generate VSS snapshots. Driver="VSS Win 2003", Drive(s)="CDEV" 26-Feb 09:40 srv-sd: User specified spool size reached. 26-Feb 09:40 srv-sd: Writing spooled data to Volume. Despooling 2,000,050,371 bytes ... 26-Feb 09:43 srv-sd: Despooling elapsed time = 00:02:07, Transfer rate = 15.74 M bytes/second 26-Feb 09:43 srv-sd: Spooling data again ... 26-Feb 09:45 srv-sd: User specified spool size reached. 26-Feb 09:45 srv-sd: Writing spooled data to Volume. Despooling 2,000,050,386 bytes ... 26-Feb 09:47 srv-sd: Despooling elapsed time = 00:01:55, Transfer rate = 17.39 M bytes/second 26-Feb 09:47 srv-sd: Spooling data again ... 26-Feb 09:50 srv-sd: User specified spool size reached. 26-Feb 09:50 srv-sd: Writing spooled data to Volume. Despooling 2,000,050,389 bytes ... 26-Feb 09:52 srv-sd: Despooling elapsed time = 00:01:43, Transfer rate = 19.41 M bytes/second 26-Feb 09:52 srv-sd: Spooling data again ... 26-Feb 09:53 srv-sd: User specified spool size reached. 26-Feb 09:53 srv-sd: Writing spooled data to Volume. Despooling 2,000,050,350 bytes ... 26-Feb 09:56 srv-sd: Despooling elapsed time = 00:02:18, Transfer rate = 14.49 M bytes/second 26-Feb 09:56 srv-sd: Spooling data again ... 26-Feb 09:57 srv-sd: User specified spool size reached. 26-Feb 09:57 srv-sd: Writing spooled data to Volume. Despooling 2,000,050,383 bytes ... 26-Feb 09:59 srv-sd: Despooling elapsed time = 00:02:16, Transfer rate = 14.70 M bytes/second 26-Feb 09:59 srv-sd: Spooling data again ... 26-Feb 10:00 srv-sd: Job write elapsed time = 00:22:02, Transfer rate = 7.759 M bytes/second 26-Feb 10:00 srv-sd: Committing spooled data to Volume "Tape05". Despooling 268,975,553 bytes ... 26-Feb 10:00 srv-sd: Despooling elapsed time = 00:00:20, Transfer rate = 13.44 M bytes/second 26-Feb 10:00 srv-sd: Alert: cannot open SCSI device 'tape0' - Permission denied 26-Feb 10:00 srv-sd: 3997 Bad alert command: tapeinfo -f tape0 | findstr TapeAlert: ERR=Unknown error. 26-Feb 10:00 srv-sd: Sending spooled attrs to the Director. Despooling 17,783,343 bytes ... 26-Feb 11:45 srv-fd: VSS Writer (BackupComplete): "MSDEWriter", State: 0x1 (VSS_WS_STABLE) 26-Feb 11:45 srv-fd: VSS Writer (BackupComplete): "System Writer", State: 0x1 (VSS_WS_STABLE) 26-Feb 11:45 srv-fd: VSS Writer (BackupComplete): "WINS Jet Writer", State: 0x1 (VSS_WS_STABLE) 26-Feb 11:45 srv-fd: VSS Writer (BackupComplete): "IIS Metabase Writer", State: 0x1 (VSS_WS_STABLE) 26-Feb 11:45 srv-fd: VSS Writer (BackupComplete): "WMI Writer", State: 0x1 (VSS_WS_STABLE) 26-Feb 11:45 srv-fd: VSS Writer (BackupComplete): "Event Log Writer", State: 0x1 (VSS_WS_STABLE) 26-Feb 11:45 srv-fd: VSS Writer (BackupComplete): "FRS Writer", State: 0x1 (VSS_WS_STABLE) 26-Feb 11:45 srv-fd: VSS Writer (BackupComplete): "TermServLicensing", State: 0x1 (VSS_WS_STABLE) 26-Feb 11:45 srv-fd: VSS Writer (BackupComplete): "NTDS", State: 0x1 (VSS_WS_STABLE) 26-Feb 11:45 srv-fd: VSS Writer (BackupComplete): "Registry Writer", State: 0x1 (VSS_WS_STABLE) 26-Feb 11:45 srv-fd: VSS Writer (BackupComplete): "COM+ REGDB Writer", State: 0x1 (VSS_WS_STABLE) 26-Feb 11:45 srv-dir: Srv.2007-02-25_23.05.00 Warning: Error getting job record for stats: ../../cats/sql_get.c:293 No Job found for JobId 97 26-Feb 11:45 srv-dir: Srv.2007-02-25_23.05.00 Error: Bacula 2.0.1 (12Jan07): 26-Feb-2007 11:45:31 JobId: 97 Job: Srv.2007-02-25_23.05.00 Backup Level: Full Client: "srv-fd" 2.0.1 (12Jan07) Linux,Cross-compile,Win32 FileSet: "Windows Full Set" 2007-01-10 23:05:01 Pool: "Default" (From Job resource) Storage: "DLT-V4" (From Job resource) Scheduled time: 25-Feb-2007 23:05:00 Start time: 25-Feb-2007 23:05:04 End time: 26-Feb-2007 11:45:31 Elapsed time: 12 hours 40 mins 27 secs Priority: 10 FD Files Written: 54,811 SD Files Written: 54,811 FD Bytes Written: 10,247,973,355 (10.24 GB) SD Bytes Written: 10,257,628,006 (10.25 GB) Rate: 224.6 KB/s Software Compression: None VSS: yes Encryption: no Volume name(s): Volume Session Id: 13 Volume Session Time: 1171896482 Last Volume Bytes: 10,267,084,800 (10.26 GB) Non-fatal FD errors: 0 SD Errors: 0 FD termination status: OK SD termination status: OK Termination: *** Backup Error *** 26-Feb 11:45 srv-dir: Begin pruning Jobs. 26-Feb 11:45 srv-dir: Pruned 2 Jobs for client pthh-fs-fd from catalog. 26-Feb 11:45 srv-dir: Begin pruning Files. 26-Feb 11:45 srv-dir: No Files found to prune. 26-Feb 11:45 srv-dir: End auto prune. ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
