On Monday 02 April 2007 18:48, [EMAIL PROTECTED] wrote:
> ---OpenSUSE 10.2, dir, sd, fd; Bacula 2.0.3; HP-Ultrium 1x8 Autoloader (with
7 slots full and one empty )---
>
> (I want my free "Answer" Kern ;-) ! )
You already got one, but the above line helps a lot so merits a second :-)
>
> when I've added the six 'Device' directives with
> Name = Drive-i #
> Drive Index = i-1
>
> where i in [1;7]
>
> the tray monitor do not respond and the console also do not respond when I
ask for the status of the Storage daemon !
>
> is there something wrong with my last modification ?
Second "free" answer:
You are going in the wrong direction. You should have only one Device
resource, as I believe I indicated in the last email. You need to learn what
distinguish drives and slots and how to deal with them in Bacula.
It isn't easy in the beginning so please read the autochanger chapter in the
manual and ask the list for more help on resolving this ...
Third "free" answer:
PS: I think both the autochanger resource chapter and the autochanger chapter
are translated into French or partically translated. They should be on the
web site, but may be slightly out of date.
Fourth "free" answer:
You need to look at www.bacula.fr or www.bacula.org/fr or click on the
French flag on www.bacula.org to get to the French translations.
Regards,
Kern
>
> Thank you for your time :-)
>
> Nawfel
> www.ilem.ch
>
> ----- Message d'origine ----
> De : "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
> À : Kern Sibbald <[EMAIL PROTECTED]>
> Cc : bacula-users@lists.sourceforge.net
> Envoyé le : Lundi, 2 Avril 2007, 15h17mn 35s
> Objet : [Bacula-users] Re : Multiple Tapes
>
> Ah ! OK !
>
> So I have to change only the logical name and the drive index ?
>
> ----- Message d'origine ----
> De : Kern Sibbald <[EMAIL PROTECTED]>
> À : spouynt BER <[EMAIL PROTECTED]>
> Cc : bacula-users@lists.sourceforge.net
> Envoyé le : Lundi, 2 Avril 2007, 15h04mn 03s
> Objet : Re: [Bacula-users] Multiple Tapes
>
> Egads, it seems to me that you are confused between Drives and Slots!
>
> From what I understand, you have a *single* drive, but 8 slots -- i.e. one
> read head, and a set of 8 tapes that can be selected one at a time.
>
> If this is the case, your conf file should have only one Device (i.e.
>
> Drive-1). Drive-1 should referent /dev/nst0 and /dev/sg2 -- forget about
> using /dev/st0 or any other /dev/nstx or /dev/stx.
>
> The manual and the list can help you get this sorted out.
>
>
> On Monday 02 April 2007 16:52, spouynt BER wrote:
> > Hi, I did some tests with a configuration file which has an Autochanger
> with only two tapes and it works, so how can I extend the file to use the
> eight (8) tapes of my autoloader ? I found only two devices in the /dev/
> witch I identified as tape drives :
> >
> > the /dev/st0 and /dev/nst0 ! and the autoloader is /dev/sg2
> >
> > the complete list of devices is :
> > adsp md15 ptyp6 ptys3 st0l tty43 ttyq3 ttys8
> >
> agpgart md16 ptyp7 ptys4 st0m tty44 ttyq4 ttys9
> > audio md17 ptyp8 ptys5 stderr tty45 ttyq5 ttysa
> > blog md18 ptyp9 ptys6 stdin tty46 ttyq6 ttysb
> > bootsplash md19 ptypa ptys7 stdout tty47 ttyq7 ttysc
> > bus md2 ptypb ptys8
> .tmp-3-0 tty48 ttyq8 ttysd
> > cdrecorder md20 ptypc ptys9 tty tty49 ttyq9 ttyse
> > cdrom md21 ptypd ptysa tty0 tty5 ttyqa ttysf
> > console md22 ptype ptysb tty1 tty50 ttyqb .udev
> > core md23 ptypf ptysc tty10 tty51 ttyqc urandom
> > device-mapper md24 ptyq0 ptysd
> tty11 tty52 ttyqd
> usbdev1.1_ep00
> > disk md25 ptyq1 ptyse tty12 tty53 ttyqe
> usbdev1.1_ep81
> > dsp md26 ptyq2 ptysf tty13 tty54 ttyqf
> usbdev2.1_ep00
> > dvd md27 ptyq3 ram0 tty14 tty55 ttyr0
> usbdev2.1_ep81
> > dvdrecorder md28 ptyq4 ram1 tty15 tty56 ttyr1
> usbdev3.1_ep00
> >
> fb0 md29 ptyq5 ram10 tty16 tty57 ttyr2
> usbdev3.1_ep81
> > fd md3 ptyq6 ram11 tty17 tty58 ttyr3
> usbdev4.1_ep00
> > full md30 ptyq7 ram12 tty18 tty59 ttyr4
> usbdev4.1_ep81
> > fwmonitor md31 ptyq8 ram13 tty19 tty6 ttyr5
> usbdev5.1_ep00
> >
> hda md4 ptyq9 ram14 tty2 tty60 ttyr6
> usbdev5.1_ep81
> > hpet md5 ptyqa ram15 tty20 tty61 ttyr7 vcs
> > i2c-0 md6 ptyqb ram2 tty21 tty62 ttyr8 vcs1
> > initctl md7 ptyqc ram3 tty22 tty63 ttyr9 vcs10
> >
> input md8 ptyqd ram4 tty23 tty7 ttyra vcs2
> > kmem md9 ptyqe ram5 tty24 tty8 ttyrb vcs3
> > kmsg mem ptyqf ram6 tty25 tty9 ttyrc vcs4
> > log mixer ptyr0 ram7 tty26 ttyp0 ttyrd vcs5
> >
> loop0 net ptyr1 ram8 tty27 ttyp1 ttyre vcs6
> > loop1 nst0 ptyr2 ram9 tty28 ttyp2 ttyrf vcs7
> > loop2 nst0a ptyr3 random tty29 ttyp3 ttys0 vcsa
> > loop3 nst0l ptyr4 route tty3 ttyp4 ttyS0 vcsa1
> >
> loop4 nst0m ptyr5 rtc tty30 ttyp5 ttys1 vcsa10
> > loop5 null ptyr6 sda tty31 ttyp6 ttyS1 vcsa2
> > loop6 nvram ptyr7 sda1 tty32 ttyp7 ttys2 vcsa3
> > loop7 port ptyr8 sda2 tty33 ttyp8 ttyS2 vcsa4
> >
> lp0 ppp ptyr9 sda3 tty34 ttyp9 ttys3 vcsa5
> > mapper psaux ptyra sg0 tty35 ttypa ttyS3 vcsa6
> > mcelog ptmx ptyrb sg1 tty36 ttypb ttys4 vcsa7
> > md0 pts ptyrc sg2 tty37 ttypc ttyS4 watchdog
> >
> md1 ptyp0 ptyrd shm tty38 ttypd ttys5 xconsole
> > md10 ptyp1 ptyre skip tty39 ttype ttyS5 zero
> > md11 ptyp2 ptyrf snapshot tty4 ttypf ttys6
> > md12 ptyp3 ptys0 snd tty40 ttyq0 ttyS6
> > md13 ptyp4 ptys1 st0
> tty41 ttyq1 ttys7
> > md14 ptyp5 ptys2 st0a tty42 ttyq2 ttyS7
> >
> > also here is the storage daemon configuration file part witch talks about
my
> autochanger :
> >
> > Autochanger {
> > Name = Autochanger
> > Device = Drive-1
> > Device = Drive-2
> > # Changer Command = "/home/kern/bacula/bin/mtx-changer %c %o %S %a %d"
> > Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
> >
> > Changer Device = /dev/sg2
> > }
> >
> > Device {
> > Name = Drive-1 #
> > Drive Index =
> 0
> > Media Type = DLT-8000
> > Archive Device = /dev/st0
> > AutomaticMount = yes; # when device opened, read it
> > AlwaysOpen = yes;
> > RemovableMedia = yes;
> > RandomAccess = no;
> > AutoChanger = yes
> > # Enable the Alert command only if you have the mtx package loaded
> > Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> > # If you have smartctl, enable this, it has more info than tapeinfo
> > Alert Command = "sh -c 'smartctl -H -l error %c'"
> > }
> >
> > Device {
> > Name = Drive-2 #
> > Drive Index = 1
> >
> Media Type = DLT-8000
> > Archive Device = /dev/nst0
> > AutomaticMount = yes; # when device opened, read it
> > AlwaysOpen = yes;
> > RemovableMedia = yes;
> > RandomAccess = no;
> > AutoChanger = yes
> > # Enable the Alert command only if you have the mtx package loaded
> > Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> > # If you have smartctl, enable this, it has more info than tapeinfo
> > Alert Command = "sh -c 'smartctl -H -l error %c'"
> > }
> >
> >
> > how can I enlarge this definition to include the use of the eight tapes ?
> >
> > thanks for helping ;-)
> >
> > Nawfel BERAÏCH
> > www.ilem.ma
> >
> >
> >
>
> >
> >
> >
> > ---------------------------------
> > Découvrez une nouvelle façon d'obtenir des réponses à toutes vos
> questions ! Profitez des connaissances, des opinions et des expériences des
> internautes sur Yahoo! Questions/Réponses.
>
>
>
>
>
>
>
>
> Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
> Profitez des connaissances, des opinions et des expériences des internautes
sur Yahoo!
Questions/Réponses.-------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
>
>
>
>
>
>
>
>
>
> ___________________________________________________________________________
> Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
> Profitez des connaissances, des opinions et des expériences des internautes
sur Yahoo! Questions/Réponses
> http://fr.answers.yahoo.com
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
