Me wrote: >[snip] > Job #1: > > 08-Apr 00:05 VU0EM005: BeforeJob: run command "/usr/bin/ssh [snip]" > 08-Apr 00:07 VU0EM005: Start Backup JobId 121, > Job=SMTCZB0003.2007-04-08_00.05.00 > 08-Apr 00:08 VU0EM005: 3307 Issuing autochanger "unload slot 4, drive 0" > command. > 08-Apr 00:09 VU0EM005: 3304 Issuing autochanger "load slot 5, drive 0" > command. > 08-Apr 00:10 VU0EM005: 3305 Autochanger "load slot 5, drive 0", status is OK. > 08-Apr 00:10 VU0EM005: 3301 Issuing autochanger "loaded? drive 0" command. > 08-Apr 00:10 VU0EM005: 3302 Autochanger "loaded? drive 0", result is Slot 5. > 08-Apr 00:10 VU0EM005: Recycled volume "06D124L3" on device "LTO3" > (/dev/nst0), all previous data lost. > > That's fine, I expected volume 06D124L3 to be overwritten at this time. > > 08-Apr 00:10 VU0EM005: Max configured use duration exceeded. Marking Volume > "06D124L3" as Used. > > But I don't know what happend at this point. Why does bacula mark volume > 06D124L3 as used right after the job started. The configured duration time > is 4 days, I checked this. > > 08-Apr 00:10 VU0EM005: Spooling data ... > SMTCZB0003-fd: Filesystem change prohibited. Will not descend into > /var/lib/nfs/rpc_pipefs > SMTCZB0003-fd: Filesystem change prohibited. Will not descend into /dev > SMTCZB0003-fd: Filesystem change prohibited. Will not descend into /sys > SMTCZB0003-fd: Filesystem change prohibited. Will not descend into /boot > 08-Apr 00:12 VU0EM005: Job write elapsed time = 00:02:23, Transfer rate = > 6.766 M bytes/second > 08-Apr 00:12 VU0EM005: Committing spooled data to Volume "06D124L3". > Despooling 968,636,754 bytes ... > 08-Apr 00:12 VU0EM005: Despooling elapsed time = 00:00:07, Transfer rate = > 138.3 M bytes/second > 08-Apr 00:12 VU0EM005: Sending spooled attrs to the Director. Despooling > 1,543,784 bytes ... > 08-Apr 00:12 VU0EM005: AfterJob: run command "/usr/bin/ssh [snip]" [snip]
Nobody? I'm a bit lost, my old bacula install worked as expected with a similar config, so I don't think that I configured bacula-dir wrong. This new install worked for the last 3 months, other volumes were recycled and reused as expected. What could lead to a volume that is recycled and then marked as used just a couple of seconds afterwards? I double checked, the volume use duration of this volume is set to 4 days. Ralf ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
