I was using that version to coincide with the director version. If I were to install the latest version of the Bacula File Daemon, will it still work with the older version of Bacula Director?
I know I should upgrade, and I will shortly; however, I just took over this job and I don't want to blow anything up. I have created a CentOS server for testing purpose. Once I am confident in the install of Bacula, I will upgrade the directory, storage and file daemon to the latest and greatest. TIA Mike Ryan Novosielski wrote: > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Don't know, but I've never built anything older than 1.38.11 on HP-UX > (you should have included the version number), and in addition I've > never built on IA64, or on 11.23. If you include these things in your > ticket (though I see I missed Itanium, but I'm not sure how much Itanium > matters), we can all waste a lot less time. > > That said, why are you using 1.36.3? I would not recommend it, > especially not with 2.2 due out soon. 1.36 to 1.38 is a painless > upgrade, and the same goes for 2.0. No sense in making extra work for > yourself. > > =R > > Mike Vasquez wrote: >> OK, It seems as the I had no errors when I did the configure but errors >> in >> the make. Here is what I did and the results >> #CFLAGS="-g -Wall" \ >> ./configure \ >> --sbindir=/opt/bacula/bin \ >> --sysconfdir=/opt/bacula \ >> --with-pid-dir=/opt/bacula/bin/working \ >> --with-subsys-dir=/opt/bacula/bin/working \ >> --enable-smartalloc \ >> --enable-client-only \ >> --with-working-dir=/opt/bacula/bin/working \ >> [EMAIL PROTECTED] >> [EMAIL PROTECTED] >> --with-smtp-host=localhost >> >> In the config.log file I noticed the following, >> configure:7214: gcc -E conftest.c >> In file included from conftest.c:37: >> /opt/hp-gcc-4.1.2/lib/gcc/ia64-hp-hpux11.23/4.1.2/include/varargs.h:4:2: >> error: #error "GCC no longer implements <varargs.h>." >> /opt/hp-gcc-4.1.2/lib/gcc/ia64-hp-hpux11.23/4.1.2/include/varargs.h:5:2: >> error: #error "Revise your code to use <stdarg.h>." >> configure:7220: $? = 1 >> configure: failed program was: >> | /* confdefs.h. */ >> >> >> When I did make, I received the following errors >> # make >> ==>Entering directory /opt/bacula/bacula-1.36.3/src >> ==>Entering directory /opt/bacula/bacula-1.36.3/scripts >> ==>Entering directory /opt/bacula/bacula-1.36.3/doc >> ==>Entering directory /opt/bacula/bacula-1.36.3/src/lib >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 alloc.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 attr.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 base64.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 berrno.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bsys.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bget_msg.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bnet.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bnet_server.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bpipe.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bshm.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 btime.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 cram-md5.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 crc32.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 daemon.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 edit.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 fnmatch.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 hmac.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 idcache.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 jcr.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 lex.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 alist.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 dlist.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 md5.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 message.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 mem_pool.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 parse_conf.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 queue.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 rwlock.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 scan.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 serial.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 sha1.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 semlock.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 signal.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 smartall.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 tree.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 util.c >> util.c: In function 'void make_session_key(char*, char*, int)': >> util.c:473: error: 'getdomainname' was not declared in this scope >> *** Error exit code 1 >> >> Stop. >> >> >> -e ====== Error in /opt/bacula/bacula-1.36.3/src/lib ====== >> >> >> ==>Entering directory /opt/bacula/bacula-1.36.3/src/findlib >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 find.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 match.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 find_one.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 attribs.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 create_file.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bfile.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 enable_priv.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 fstype.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 makepath.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 save-cwd.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 winapi.c >> /usr/bin/rm -f libfind.a >> /usr/bin/ar cr libfind.a find.o match.o find_one.o attribs.o >> create_file.o bfile.o enable_priv.o fstype.o makepath.o save-cwd.o >> winapi.o >> ranlib libfind.a >> Make: Don't know how to make ../lib/libbac.a. Stop. >> >> >> -e ====== Error in /opt/bacula/bacula-1.36.3/src/findlib ====== >> >> >> ==>Entering directory /opt/bacula/bacula-1.36.3/src/filed >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 filed.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 authenticate.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 backup.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 estimate.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 filed_conf.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 heartbeat.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 job.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 restore.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 status.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 verify.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 verify_vol.c >> Make: Don't know how to make ../lib/libbac.a. Stop. >> >> >> -e ====== Error in /opt/bacula/bacula-1.36.3/src/filed ====== >> >> >> ==>Entering directory /opt/bacula/bacula-1.36.3/src/console >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 console.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 console_conf.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 authenticate.c >> g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 conio.c >> Make: Don't know how to make ../lib/libbac.a. Stop. >> >> >> -e ====== Error in /opt/bacula/bacula-1.36.3/src/console ====== >> >> >> ==>Entering directory /opt/bacula/bacula-1.36.3/rescue >> ==>Entering directory /opt/bacula/bacula-1.36.3/rescue/linux >> >> Any ideas? Could something be wrong with the Flag in ./configure? Wrong >> version of gcc? It seems that it is looking for libbac.a. I searched >> for >> this file and it was not present. Where would I get this file? >> >> TIA >> >> Mike >> >> Ryan Novosielski wrote: >> Sounds right to me... like I said, I did nothing special, but >> --with-client-only (or --enable-client-only, read the configure help as >> I don't remember the flag name) is surely what I did since I did not >> build a director on that machine. >> >> Should work fine -- post errors if you get them, as it's hard to predict >> with no info. >> >> =R >> >> Mike Vasquez wrote: >>>>> Hi. >>>>> >>>>> It would be nice to know the procedures you used to compile HP-UX. I >>>>> am >>>>> in >>>>> the same situation. I have installed gcc with success. Now, do I get >>>>> the >>>>> src and do a ./configure --with client-only? I am a newbie with >>>>> bacula >>>>> and >>>>> HP. >>>>> >>>>> TIA >>>>> Mike >>>>> >>>>> >>>>> Ryan Novosielski wrote: >>>>>> Just built it myself on Friday. I believe I used gcc, mainly because >>>>>> some >>>>>> is in c++, and for some reason I didn't have HP's installed. >>>>>> >>>>>> Builds just fine -- no compile errors. >>>>>> >>>>>> -----Original Message----- >>>>>> >>>>>> From: Xeos Laenor <[EMAIL PROTECTED]> >>>>>> Subj: [Bacula-users] HP-UX clients >>>>>> Date: Mon Mar 5, 2007 5:45 am >>>>>> Size: 326 bytes >>>>>> To: bacula-users <bacula-users@lists.sourceforge.net> >>>>>> >>>>>> I use bacula with success on a RhEL4 Server and i need integrate a >>>>>> HP-UX >>>>>> client in order to backup it. >>>>>> Does a binary client exist for HP-UX (v11 for itanium)? >>>>>> if not, have you some advises for compiling bacula-client on HP-UX >>>>>> (from >>>>>> your own experience)? >>>>>> >>>>>> Thanks a lot >>>>>> >>>>>> Franck >>>>>> --- message truncated --- >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------------- >>>>>> Take Surveys. Earn Cash. Influence the Future of IT >>>>>> Join SourceForge.net's Techsay panel and you'll get the chance to >>>>>> share >>>>>> your >>>>>> opinions on IT & business topics through brief surveys-and earn cash >>>>>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV >>>>>> _______________________________________________ >>>>>> Bacula-users mailing list >>>>>> Bacula-users@lists.sourceforge.net >>>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users >>>>>> >>>>>> >>> >>> > - > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users >>> >>> > > - -- > ---- _ _ _ _ ___ _ _ _ > |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Systems Programmer III > |$&| |__| | | |__/ | \| _| |[EMAIL PROTECTED] - 973/972.0922 (2-0922) > \__/ Univ. of Med. and Dent.|IST/AST - NJMS Medical Science Bldg - C630 > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.5 (MingW32) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org > > iD8DBQFGNhlTmb+gadEcsb4RAqaZAKC96E2HfdxHiEJAK6IsLCffioLCBACeNagZ > K2I6hrNM8L19xqZrkCMDe2U= > =Skkr > -----END PGP SIGNATURE----- > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > > -- View this message in context: http://www.nabble.com/HP-UX-clients-tf3348023.html#a10257378 Sent from the Bacula - Users mailing list archive at Nabble.com. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
