Hi, On 5/17/2007 3:53 PM, Erik P. Olsen wrote: > Status command gives following message: > > Device status: > Device "DDS-4" (/dev/nst0) is mounted with Volume="EPOL008" Pool="*unknown*" > Total Bytes Read=0 Blocks Read=0 Bytes/block=0 > Positioned at File=0 Block=0 > > Why is the pool named *unknown*? I thought bacula would know which pools the > individual volumes belonged to.
Right, Bacula as a whole does know that. But the SD, unless it already communicated with the DIR, can't know. So I suppose that this is the status you get right after you started the SD. Once the SD was controlled by the DIR - typically after starting a job - it will report the correct pool name. Arno -- IT-Service Lehmann [EMAIL PROTECTED] Arno Lehmann http://www.its-lehmann.de ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users