Hi, I have 'Director' and 'Storage' in a server with two ranges of LAN ip's (192.168.1.0/24 and 192.168.2.0/24). The client with problems is in 192.168.2.0 range. When I run a Job, the communications with the 'Director' and the 'client' are OK, but when the 'Client' tries to connect to the 'SD' it tries it with the 'SD' server IP on 192.168.1.0 range.
Do I have to define in the config files any resource to determine the route of the connection between 'FD' and 'SD'? I am surprised because there isn't any problem with the connection between 'Director' and 'FD' with range 192.168.2.0. Thanks, David ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users