On Sat, 14 Jul 2007 10:58:23 -0600
Ken Gunderson <[EMAIL PROTECTED]> wrote:

> On Wed, 11 Jul 2007 17:11:05 -0500
> Michael Hughes <[EMAIL PROTECTED]> wrote:
> 
> > On Tue, 10 Jul 2007 16:36:59 -0500
> > Michael Hughes <[EMAIL PROTECTED]> wrote:
> > 
> > >   I have loaded Bacula 2.0.3 from source on my FreeBSD system.  I
> > > ran btape test and it passed all the tests.  Also ran the
> > > autoloader test and that passed.
> [snip]
> > 
> >   Well I think I figured out what my problem was.  It turned out to
> > be a SCSI cable problem.  I got to looking in the logs and found
> > this error:
> > 
> >  /kernel: sym0: unexpected disconnect
> > 
> >   After doing some re-cabling, it start to work without any
> > errors.  I don't understand why restore(8) was able to read from
> > that drive and both dunp(8) and Bacula were able to write to the
> > drive.
> 
> This doesn't seem to make any sense.  Would you elaborate on
> "re-cabling"?  New cables, connected differently, different
> terminator, or you just removed and reattached same, etc.?  Was there
> a reboot thrown in there?  Maybe triggered a camcontrol reset??
> 
> -- 
> Best regards,
> 
> Ken Gunderson
> GPG Key -- 9F5179FD
> 
> "Never hold discussions with the monkey when the organ grinder is in
> the room." - Sir Winston Churchill
> 

Ken,
  I didn't reboot.  I changed one of the cables.  Did a camcontrol bus
rest command and everything started working.  Was been working every
since.  So I'm thinking that the cable I was using was bad.

-- 
Michael Hughes                      Log Home living is the best
[EMAIL PROTECTED]

Temperatures:
Outside: 74.9 House: 71.8 Computer room: 69.3

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to