Hi, What could be wrong with the "update slots scan" command? My bacula installation drops InChanger state for tapes on random periodically, but mostly after I swap one of them. I usually run "update slots=N scan" after replacing a tape and it works without complaints, e.g. it successfully updates this particular slot N (even though "slots=N" option was somehow dropped from the documentation recently). It also usually works for some days after that, e.g. tapes are properly located by director and "list media" shows correct InChanger status. Then after a few days InChanger bit for a random number of tapes gets reset to 0. The cure is to run update with full scan for all slots, i.e. "update slots scan" but it only helps temporarily. I have regenerated database three times and checked all MySQL tables and it does not help. Anyone else noticed this?
N.B. I am running Bacula 1.38.11 with a 20-tape Qualstar autochanger, single tape drive. --Ivan The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information. ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
