On Saturday, 15 December 2007 16:02:40 -0500, Michael Galloway wrote: > > Now I'm trying to perform backups operations. I've noticed when I > > try label a volume, Bacula uses the slot 0 and then it causes a > > mount error. > > *label > > Automatically selected Storage: DLTDrive > > Enter new Volume name: DLT-15Dic07 > > Defined Pools: > > 1: Default > > 2: SundayPool > > Select the Pool (1-2): 1 > > Connecting to Storage daemon DLTDrive at sparky.educ.gov.ar:9103 ... > > Sending label command for Volume "DLT-15Dic07" Slot 0 ... > > Invalid slot=0 defined, cannot autoload Volume. > > 3301 Issuing autochanger "loaded drive 0" command. > > 3302 Autochanger "loaded drive 0", result: nothing loaded. > > 3301 Issuing autochanger "loaded drive 0" command. > > 3302 Autochanger "loaded drive 0", result: nothing loaded. > > 3912 Failed to label Volume: ERR=dev.c:678 Rewind error on "Drive-1" > > (/dev/nst0). ERR=No medium found. > > > > Label command failed for Volume DLT-15Dic07. > > Do not forget to mount the drive!!!
> > I have seen some cases where Bacula asks on the slot for the volume. > > How I can obtain this behavior? > try this from the console: > update slots (or update slots scan) > mount I found the form. From the Bacula's manual: ----------------------------------------------------------------------- If you add an Autochanger = yes record to the Storage resource in your Director's configuration file, the Bacula Console will automatically prompt you for the slot number when the Volume is in the changer when you add or label tapes for that Storage device. ----------------------------------------------------------------------- However, I have the following doubt (maybe off-topic): there is one of tapes on autochanger that when trying to reuse it with mt -f /dev/nst0 rewind mt -f /dev/nst0 weof I obtained an input/output error. Right now I'm not in the datacenter where StorEdge is, but I remember one of tapes was a cleaning tape. Can it cause an input/output error with rewind or weof? On the other hand, with the previous application used with the StorEdge (Solstice), introducing the tape in the DLT, began, automatically, the cleaning cycle. I'm not sure if Solstice would send a special command for it. Is there some form to initiate the cleaning cycle by means of mt/mtx? Thanks for your response. Regards, Daniel -- Daniel Bareiro - System Administrator Fingerprint: BFB3 08D6 B4D1 31B2 72B9 29CE 6696 BF1B 14E6 1D37 Powered by Debian GNU/Linux Etch - Linux user #188.598
signature.asc
Description: Digital signature
------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
