I have a Dell Powervault 120T w/ 2 Drives.
First: Config:
Autochanger {
Name = Autochanger
Device = Drive-1
Device = Drive-2
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg0
}
Device {
Name = Drive-1 #
Drive Index = 0
Media Type = LTO1
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
# Enable the Alert command only if you have the mtx package loaded
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
Device {
Name = Drive-2 #
Drive Index = 1
Media Type = LTO1
Archive Device = /dev/nst1
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
# Enable the Alert command only if you have the mtx package loaded
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
Running /etc/bacula/mtx-changer:
>./mtx-changer /dev/sg0 slots
20
running bconsole:
*label barcodes
Automatically selected Storage: AutoChanger
Enter autochanger drive[0]:
Connecting to Storage daemon AutoChanger at tapetest:9103 ...
3306 Issuing autochanger "slots" command.
Device "Autochanger" has 0 slots.
No slots in changer to scan.
I cannot seem to add Tapes/Volumes as bacula does not find any slots in
the library.
Help much appreciated.
Matt.
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
