Glen Vickers wrote:
> Hello all.
>
>
>
> I’m new to the list and having some issues with getting this backup tape
> system running. I decided to use bacula because it has a GUI form on
> webmin making it easier to remotely manage.
>
>
>
> When at console I’m running a test to see if I can’t get this thing to run.
>
>
>
> */sbin/btape -c /etc/bacula/bacula-sd.conf /dev/nst0*
>
> *Tape block granularity is 1024 bytes.*
>
> *btape: butil.c:285 Using device: "/dev/nst0" for writing.*
>
> *27-Jan 15:48 btape: Fatal Error at device.c:296 because:*
>
> *dev open failed: dev.c:433 Unable to open device "DDS-4" (/dev/nst0):
> ERR=Device or resource busy*
>
> * *
>
> *27-Jan 15:48 btape JobId 0: Fatal error: butil.c:194 Cannot open
> "DDS-4" (/dev/nst0)*
>
> * *
>
> I’m assuming it is probably a driver problem but I’m not sure. When I
> did the straight write test and mounting of the tape drive…. I didn’t
> get any errors. Anyone point me in the right direction to get this
> resolved?
what system is it?
are you sure as device appear as /dev/nst0?
--
bEsT rEgArDs | "Confidence is what you have before you
tomasz dereszynski | understand the problem." -- Woody Allen
|
Spes confisa Deo |
numquam confusa recedit |
|
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
