On Thu, 07 Feb 2008 15:50:28 +0200, Dan Langille <[EMAIL PROTECTED]> wrote:
> Vladimir Vasilev wrote: >> Hi folks >> Do anyone has a solution when the bacula server is behind NAT? >> bacula_internal-dir tells public-fd to send data to >> bacula_internal-sd, but bacula_internal-sd is on internat network >> (behind NAT). Can I tell the SD to initialize the connection to the >> public-fd? >> Port fowarding, VPN tunelling, etc are plan B. > > Create two Storage resources in bacula-dir.conf. Give them different IP > addresses, one public, one private. Use the public one for clients > outside. Use the firewall to redirect the public IP address to the SD. > > Point both Storage resources at the same SD. > > Make sense? > Well... not realy. I do not have a second public IP. I have one public ip to the router and that is all. SD can only bind and use private IP. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users