Hi all,
This is slightly off topic. I've been using an Exabyte Magnum 224
autoloader with 12-slot magazine and single LTO-3 drive with Bacula
2.2.7for several months now.
I recently purchased an additional magazine to increase the number of tapes
in a given cycle.
According to Exabyte I should only have to insert the magazine for the
autoloader to recognize it. Which it seemed to do. However, as a precursor
to using this with Bacula, I wanted to test the mtx status output.
[EMAIL PROTECTED]: mtx -f /dev/scsi/changer/c6t4d1 status
Storage Changer /dev/scsi/changer/c6t4d1:1 Drives, 13 Slots ( 1
Import/Export )
Data Transfer Element 0: Empty
Storage Element 1:Full :VolumeTag=A00037
Storage Element 2:Full :VolumeTag=A00038
Storage Element 3:Full :VolumeTag=A00039
Storage Element 4:Full:VolumeTag=A00040
Storage Element 5:Full :VolumeTag=A00041
Storage Element 6:Full :VolumeTag=A00042
Storage Element 7:Full :VolumeTag=A00043
Storage Element 8:Full :VolumeTag=A00044
Storage Element 9:Full :VolumeTag=A00045
Storage Element 10:Full :VolumeTag=A00046
Storage Element 11:Full :VolumeTag=A00047
Storage Element 12 IMPORT/EXPORT:Full :VolumeTag=A00048
Storage Element 13:Empty :VolumeTag=
So only 1 additional slot is seen, rather than the 12 more (24 total)
expected.
I'm asking if anyone else has run into this issue with their Exabyte Magnum
224
Thanks
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
