On Thu, 2008-10-16 at 16:40 -0400, John Drescher wrote:
> On Thu, Oct 16, 2008 at 4:21 PM, Craig White <[EMAIL PROTECTED]> wrote:
> > I'm looking at the documentation and it suggests that I need to put the
> > 'Changer Command' in both the Storage definition and in the Autochanger
> > Resource. That seems redundant. I am gathering that I only need that
> > command in the Autochanger Resource.
> >
> > But what is bothering me more is my bacula-dir.conf is configured to use
> > 'LTO-3' as Storage.
> >
> > and a partial of my bacula-sd.conf (below) has
> >
> > Device {
> > Name = LTO-3 #
> > Media Type = LTO-3
> > Archive Device = /dev/nst0
> > AutomaticMount = yes; # when device opened, read it
> > RemovableMedia = yes;
> > RandomAccess = no;
> > AutoChanger = yes
> > }
> This is not needed or wanted.
>
> > Autochanger {
> > Name = "Autochanger"
> > Device = Drive-1, Drive-2...
> > Changer Device = /dev/sg4
> > Changer Command = "/usr/lib/bacula/mtx-changer %c %o %S %a %d"
> > }
> >
> > Device {
> > Name = Drive-1
> > Drive Index = 0
> > Media Type = LTO-3
> > Archive Device = /dev/nst0 # Normal archive device
> > Autochanger = yes
> > LabelMedia = no;
> > AutomaticMount = yes;
> > AlwaysOpen = yes;
> > }
> >
> > does this seem right?
> >
> Loose the first device otherwise it looks fine to me. Here is my
> definition for my 2 drive Exabyte Magnum 224:
>
> Autochanger {
> Name = Magnum224-0
> Device = LTO2-0, LTO2-1
> Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
> # Changer Device = /dev/sg5
> # 02/12/2007 added udev rule to link /dev/autochanger1 to the changer
> Changer Device = /dev/autochanger1
> }
>
> Device {
> Name = LTO2-0
> Media Type = LTO-2
> Drive Index = 0
> Archive Device = /dev/nst0
> Autochanger=yes
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> Spool Directory = /mnt/tmp/bacula/tape
> Maximum Job Spool Size = 5G
> # Maximum Block Size = 262144
> # Minimum Block Size = 262144
> # Volume Poll Interval = 5 minutes
> # Close on Poll = Yes
> # Offline On Unmount = no
> LabelMedia = Yes
> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>
> # Maximum blocksize = 512K
> }
>
> Device {
> Name = LTO2-1
> Media Type = LTO-2
> Drive Index = 1
> Archive Device = /dev/nst1
> Autochanger=yes
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> Spool Directory = /mnt/tmp/bacula/tape
> Maximum Job Spool Size = 5G
> # Maximum Block Size = 262144
> # Minimum Block Size = 262144
> # Volume Poll Interval = 5 minutes
> # Close on Poll = Yes
> # Offline On Unmount = no
> LabelMedia = Yes
> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>
> # Maximum blocksize = 512K
>
> }
----
got it...am labeling tapes via barcodes now
awesome program
Thanks
Craig
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
