Jason Selwitz wrote: > Hi there I was wondering if anyone had seen this before, I have a Gentoo > Linux system running bacula 2.4.2 with an attached LTO4 media changer > the backups are running fine as are the verifys however if I go to > manually run a full backup it starts to move to the last file of the > current tape then marks the tape as errored and starts writing to the > next good tape, just curious if anyone has seen this before or if > anyone knows of any settings for bacula that are necessary for LTO4? thanks.
I haven't played with LTO4 tapes, but a good place to start is to run the btape validation tests. That should make sure that there isn't any problem with your configuration on your particular hardware setup. -- Frank Sweetser fs at wpi.edu | For every problem, there is a solution that WPI Senior Network Engineer | is simple, elegant, and wrong. - HL Mencken GPG fingerprint = 6174 1257 129E 0D21 D8D4 E8A3 8E39 29E3 E2E8 8CEC ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users