Hello,
Recently I had to restore data from purged volumes that hadn't been
recycled hopefully. It's files on hard drives.
I rebuild the catalog with bscan.
And I launch restoration jobs.
In bacula-sd.conf, we can find :
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Device {
Name = FileStorage1
Media Type = File
Archive Device = /bacula/disk01/
LabelMedia = yes; # lets Bacula label unlabeled media
Random Access = Yes;
AutomaticMount = yes; # when device opened, read it
RemovableMedia = no;
AlwaysOpen = no;
}
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
and in bacula-dir.conf
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Storage {
Name = backup01c-sd
Address = backup01c.univ-avignon.fr
SDPort = 9103
Password = "xxxxxxxxx"
Device = FileStorage1
Media Type = File
TLS Enable = yes
TLS Require = yes
...
}
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
There is also FileStorage2 defined with /bacula/disk02/ partition
(Storage backup01c-sd2).
*All my old volumes are located on /bacula/disk02/*, but just before
launching restore job, I could read :
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
The job will require the following
Volume(s) Storage(s) SD Device(s)
===========================================================================
Full-0113 backup01c-sd2 FileStorage2
Inc-0263 backup01c-sd FileStorage1
Inc-0373 backup01c-sd FileStorage1
Inc-0406 backup01c-sd FileStorage1
Inc-0412 backup01c-sd FileStorage1
Inc-0466 backup01c-sd2 FileStorage2
Inc-0486 backup01c-sd2 FileStorage2
Inc-0546 backup01c-sd2 FileStorage2
Inc-0566 backup01c-sd2 FileStorage2
Inc-0072 backup01c-sd2 FileStorage2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
But all volumes had been read from /bacula/disk02/ since job report
displays :
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
22-Nov 18:35 backup01c-sd JobId 2924: Ready to read from volume
"Inc-0263" on device "FileStorage2" (/bacula/disk02/).
22-Nov 18:36 backup01c-sd JobId 2924: End of Volume at file 2 on device
"FileStorage2" (/bacula/disk02/), Volume "Inc-0263"
22-Nov 18:36 backup01c-sd JobId 2924: Ready to read from volume
"Inc-0373" on device "FileStorage2" (/bacula/disk02/).
22-Nov 18:36 backup01c-sd JobId 2924: End of Volume at file 0 on device
"FileStorage2" (/bacula/disk02/), Volume "Inc-0373"
22-Nov 18:36 backup01c-sd JobId 2924: Ready to read from volume
"Inc-0406" on device "FileStorage2" (/bacula/disk02/).
22-Nov 18:37 backup01c-sd JobId 2924: End of Volume at file 2 on device
"FileStorage2" (/bacula/disk02/), Volume "Inc-0406"
22-Nov 18:37 backup01c-sd JobId 2924: Ready to read from volume
"Inc-0412" on device "FileStorage2" (/bacula/disk02/).
22-Nov 18:39 backup01c-sd JobId 2924: End of Volume at file 2 on device
"FileStorage2" (/bacula/disk02/), Volume "Inc-0412"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
I think bacula is confused because there are non purged volumes named
Inc-0263, Inc-0373, Inc-0406, and Inc-0412 on FileStorage1 :
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
*list volume=Inc-0406
+---------+------------+-----------+---------+---------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles
| VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten
|
+---------+------------+-----------+---------+---------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| 406 | Inc-0406 | Used | 1 | 9,337,460,938 | 0
| 2,592,000 | 1 | 0 | 0 | File | 2008-10-21
08:27:27 |
+---------+------------+-----------+---------+---------------+----------+--------------+---------+------+-----------+-----------+---------------------+
*list volumes jobid=2542
Jobid 2542 used 1 Volume(s): Inc-0406
+-------+------------+---------------------+------+-------+----------+-------------+-----------+
| JobId | Name | StartTime | Type | Level | JobFiles |
JobBytes | JobStatus |
+-------+------------+---------------------+------+-------+----------+-------------+-----------+
| 2,542 | job_web01c | 2008-11-04 01:48:10 | B | I | 2,982 |
559,944,881 | T |
+-------+------------+---------------------+------+-------+----------+-------------+-----------+
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Dates don't match...
What brings me to the points :
1) There are purged volumes on a partition (storage device) and non
purged volumes identically named on the other partition. Is my bacula
configuration weird or is it a normal state?
2) If everything is fine, bacula console shouldn't have displayed it
will use volumes from backup01c-sd FileStorage1. So is it a bug?
Thanks for your comments
--
Maxime CHARPENNE
Université d'Avignon et des Pays de Vaucluse - CRI
Tél. : +33 4 90 16 26 05
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
