> > Hi I really appreciate the discussion about advantages and > disadvantages of compression. But please bear in mind that I am not > using compression *in anyway*. So please could you help me to solve > this problem. Below I let you config files (a bit shortened and > changed in obvious parts like Password), JOb report and info from mt > and tapeinfo: > > Some Clarifications: DirectorandStorageServerThatHasDat72, is the > Director and Storage Server That Has Dat 72 ;) > > Bulldog, Clark are bacula clients > > StorageServerThasHasLTO3: Storage Server Thas Has LTO3 ;) >
I'm not sure if anyone brought this up, but it looks like you are using spooling. I don't see any concurrent job options which would default to only running one job at a time. Depending on the speed of your connection from the FD to the SD and the speed of the spool disks and its size would also contribute to the speed. What I look for is "despool time" and speed. That gives me an indication of how fast my LTO-3 drives are during jobs. If your spool space is not large enough to hold the entire job, you may notice a very bad transfer rate because I think Bacula starts the clock at the first despool and stops it at the end of the last despool. I'm not an expert, but just jumping into this thread, that is what I can see. ------------------------------------------------------------------------------ Check out the new SourceForge.net Marketplace. It is the best place to buy or sell services for just about anything Open Source. http://p.sf.net/sfu/Xq1LFB _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
