I'm seeing "st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1)"
messages from "dmesg" command and checking the /var/log/messages file, I see
the same. I was able to do "mt" commands a couple of hours ago, failed a few
minutes ago and it is working again right now. Maybe I should restart the
whole tape changer later on.
On Tue, Jan 20, 2009 at 12:25 PM, John Drescher <dresche...@gmail.com>wrote:
> On Tue, Jan 20, 2009 at 11:49 AM, Win Htin <win.h...@gmail.com> wrote:
> > Hi folks,
> >
> > I received a "Backup Fatal Error" report from one of my prod backups last
> > evening. After going through the report, I noticed the initial volume
> that
> > was being used went in Error. Bacula loaded a new volume from scratch
> pool,
> > continued with the backups and after writing less than 18GB of data,
> marked
> > the new volume with "Full" status. This went on with 2 more new volumes
> with
> > very little data actually written to each volume. Any idea what happened?
> >
> There is a problem communicating with the tape drive. This can be bad
> hardware or a bad scsi driver. First take a look at your dmesg
>
>
> John
>
--
email : win.h...@gmail.com
"The unexamined life is not worth living" -- Socrates
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
