On Tue, Dec 23, 2008 at 04:36:00PM -0800, Conor Edberg wrote: > > I saw some mention of these past problems during my research, so I > attempted to rule out network issues. In my case, the FD, SD, and dir are > all on the same machine, so I assume the problem isn't switches or cabling. > > The machine is a Sun x4100m2, with 2 Intel Pro 1000 (e1000g driver) and 2 > Nvidia (nge driver) interfaces, and I've tried using each model as the > active interface. I've also tried using localhost/127.0.0.1 versus the > FQDN in all the config files. I can't totally rule out a driver problem, > but I can at least say it applies to 2 different drivers. I've seen this > problem both on Bacula 2.4.2 and 2.5.16 with almost default configs, > definitely no networking parameter changes.
I finally managed to grab a truss during one of these failures. It's fairly large so I've uploaded it to our mirror. Hopefully this will help reveal something. http://mirrors.omniti.com/bacula/bacula.truss Thanks, -- Jason Dixon OmniTI Computer Consulting, Inc. jdi...@omniti.com 443.325.1357 x.241 ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
