I will preface this with the usual "I am new to Bacula" statement before diving
into this. I have Googled the errors, and looked at email threads and
attempted to get my configs to look like the ones in the documentation and in
the various forums and email threads. But nothing seems to work.
Here is the issue:
When I run btape, I get the following:
btape -c /etc/bacula/bacula-sd.conf autochanger
Tape block granularity is 1024 bytes.
btape: butil.c:278 Could not find device "autochanger" in config file
/etc/bacula/bacula-sd.conf.
05-Feb 16:39 btape JobId 0: Fatal error: butil.c:168 Cannot find device
"autochanger" in config file /etc/bacula/bacula-sd.conf.
When I run bconsole, I regularly get this:
3999 Device "LTO-2" not found or could not be opened.
Here is the storage related sections of -dir.conf in directory /etc/bacula:
Storage {
Name = LTO-2
Address = host.domain.com
SDPort = 9103
Password = host
Device = /dev/st0
Media Type = Ultrium2
}
Here is the Pool definition in -dir.conf
Pool {
Name = "Tape"
Pool Type = Backup
Volume Retention = 365 days
Recycle = yes
AutoPrune = yes
Storage = LTO-2
}
And finally, here are the entries in -sd.conf from /etc/bacula:
Autochanger {
Name = Autochanger
Device = LTO-2
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg1
}
Device {
Name = LTO-2
Drive Index = 0
Device Type = Tape
Media Type = Ultrium2
Archive Device = /dev/st0
AutomaticMount = yes
AlwaysOpen = yes
RemovableMedia = yes
RandomAccess = no;
AutoChanger = yes
LabelMedia = yes
Spool Directory = /tmp/spool
Maximum Spool Size = 700000000
Random Access = no
}
dmesg has the following information:
scsi 1:0:0:0: Medium Changer HP C7200 1720 PQ: 0 ANSI: 3
scsi 1:0:0:0: Attached scsi generic sg1 type 8
scsi 1:0:0:1: Sequential-Access HP Ultrium 2-SCSI F59W PQ: 0 ANSI: 3
st 1:0:0:1: Attached scsi tape st0
st 1:0:0:1: st0: try direct i/o: yes (alignment 4 B)
st 1:0:0:1: Attached scsi generic sg2 type 1
This is running on a dedicated backup server running openSUSE with Bacula
v2.4.2, with an HP C7200 "Galactica" model tape library, upgraded to LTO-2.
Currently it only has one drive, but will soon have two. Currently, Bacula is
running as root (I will change that once I get this working), but I have
chmod'd /dev/st0 /dev/nst0 and /dev/sg2 to 0777 just to be sure. I've tried
using /dev/nst0 and /dev/sg2, the latter being what the HP Tape Tools reports
as being the actual tape drive and matches dmesg, but nothing seems to go.
Hopefully that is enough information. if not, I will be happy to provide
anything else needed.
Any assistance is greatly appreciated. I am so close to getting this working,
I can taste it.
Thanks!
------------------------------------------------------------------------------
Create and Deploy Rich Internet Apps outside the browser with Adobe(R)AIR(TM)
software. With Adobe AIR, Ajax developers can use existing skills and code to
build responsive, highly engaging applications that combine the power of local
resources and data with the reach of the web. Download the Adobe AIR SDK and
Ajax docs to start building applications today-http://p.sf.net/sfu/adobe-com
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
